Find work in Canada.

322,205 jobs across our Canadian network. How we count

Jobs in Canada

25+ jobs

Email me new jobs Save this search

Added 26 mins ago
WI
Lead Instrumentation & Control Engineer, Resources
WSP in Canada
Markham, ON
- Full-time
…Greater Toronto Area, Saskatoon SK, St John's NL as a Lead I&C Engineer, you will support as a senior subject matter expert in the instrumentation and controls engineering for both new…
Added 26 mins ago
IA
Process Engineer
Indotronix Avani Group
ON · Ontario, Canada
- Contract
Analyzing facility operations and identifying opportunities to reduce energy consumption and improve performance.
Added 26 mins ago
D
Devsecops Engineer
Deel
Canada
- Full-time
…works today, Deel combines HRIS, payroll, compliance, benefits, performance, and equipment management into one seamless platform. With AI-powered tools and a fully owned payroll…
Added 26 mins ago
A
Senior Project Engineer
ABB
Calgary, AB
- Full-time
ABB is seeking a Senior Lead Project Engineer to join our team. In this role, you will provide technical leadership and oversee the successful execution of multidisciplinary electrical…
Added 26 mins ago
A
Reliability Engineer
Adecco
Fort McMurray, AB
- $80 to $95 CAD / hour
- Full-time
Adecco is currently hiring a full-time experienced Reliability Engineer - Fixed Equipment & Asset Integrity to join our client's team in Fort McMurray, Alberta. This is an exciting…
Added 26 mins ago
H
Senior Test & Validation Engineer
Humanoid
Burnaby, BC
- Full-time
As a Senior Test and Validation Engineer at Humanoid, you will be responsible for bringing new hardware subsystems into a functional, controllable, measurable, and integration-ready state,…
Added 56 mins ago
ST
Industrial Engineer - Internal Logistics Engineering
SEGULA Technologies
Windsor, ON
- Full-time
We are seeking an experienced Logistics Engineer to lead the design, development, and execution of optimal internal logistics networks for New Product Introductions (NPI) and continuous…
Added 56 mins ago
AI
Project Manager - Civil Engineering
American Iron & Metal (AIM)
Montreal, QC
- Full-time
Conduct post-project reviews (lessons learned) to evaluate project performance and identify opportunities for continuous improvement.
Added 56 mins ago
KI
Manufacturing Engineer Body
KYYBA Inc
Windsor, ON
- Full-time
Salary: $45.00 CAD - $55.00 CAD per hour depending on experience, annual performance bonus and discretionary bonus
Added 56 mins ago
MA
Industrial Energy Solutions Advisor
Manpower Alberta
Stoney Creek, NB
- $54 to $55 CAD / hour
- Contract
Analyzing facility operations and identifying opportunities to reduce energy consumption and improve performance.
Added 56 mins ago
ET
Senior LLM Research Engineer
Encore Technical Solutions Inc.
Toronto, ON
- Full-time
We're looking for a Senior LLM Research Engineer to help build and optimize advanced language models for complex, real-world applications. This role spans the full lifecycle of model…
Added 57 mins ago
H
CONOPS & Mission Analysis Systems Engineer | Remote Opportunity | Fastwater Staffing
HIKINEX
Remote, Canada
- Full-time
- Remote
We are seeking an experienced CONOPS & Mission Analysis Systems Engineer to lead mission planning, systems engineering, and operational analysis for advanced LEO and MEO satellite programs.…
Added 57 mins ago
Systems Engineer, Data Center Debug
Tenstorrent
Toronto, ON
Tenstorrent is leading the industry on cutting-edge AI technology, revolutionizing performance expectations, ease of use, and cost efficiency. With AI redefining the computing paradigm,…
Added 57 mins ago
Canada Tax Technology Group (CTTG) - Manager, AI Adoption & Enablement
EY
Toronto, ON
We're looking for someone who is not necessarily a traditional developer, data scientist, or AI engineer. We're looking for an innovator, coach, and problem solver who can quickly…
Added 1 hour ago
D
Principal Product Manager, Sandboxes
Docker
Remote, Canada
- Full-time
- Remote
…developer infrastructure, and prior experience as a software engineer. You will need to understand containers, sandboxes/microVMs, virtualization technologies, hypervisors, the software…
Added 1 hour ago
A
Mechanical Engineer, Data Centers
AECOM
Markham, ON
- $90,000 to $145,000 CAD / year
- Full-time
AECOM is seeking a Mechanical Engineer to join our growing Canadian Data Center practice. This role will support the design and delivery of hyperscale, colocation, and other…
Added 1 hour ago
CI
Intern Analyst, PhD – Systematic Strategies Group
CPP Investments | Investissements RPC
Toronto, ON
- Full-time
…collaboration with exceptional colleagues who value partnership and performance. Here, you’ll contribute to outcomes that matter alongside team members committed to excellence and shared…
Added 1 hour ago
P
Sr. Fuil Stack Engineer, Threat Intelligence
Proofpoint
ON · Ontario, Canada
- Full-time
Proactively identify problems before they become incidents Seek out reliability, performance, and correctness issues. Improve runbooks, dashboards, alert quality, and automation.
Added 1 hour ago
IW
AI Development & Continuous Improvement Student (Summer 2027)
Irving Woodlands
Saint John, NB
- Full-time
Reporting to the Maintenance Process & Performance Engineer, the role will support the development and implementation of digital solutions that improve operational efficiency, automate…
Added 1 hour ago
AI
AWS DATA ENGINNER
Apptoza Inc.
Toronto, ON
- Contract
Architect, build, and optimize end-to-end batch and streaming data pipelines for scalability, reliability, and performance.
Added 1 hour ago
P
Sr. Fuil Stack Engineer, Threat Intelligence
Proofpoint
Quebec, QC
- Full-time
Proactively identify problems before they become incidents Seek out reliability, performance, and correctness issues. Improve runbooks, dashboards, alert quality, and automation.
Added 1 hour ago
S
Senior Full-Stack Engineer, NimbleRx
Swoop
Toronto, ON
- Full-time
As a Senior Full-Stack Engineer, you will have a hand in architecting the technology and customer experience that are pivotal to multiple web products for patients, pharmacies, and other…
Added 1 hour ago
RT
Engineer Enterprise Asset Management
Rio Tinto
Kitimat, BC
- Full-time
Shape the quality and reliability of asset data that underpins maintenance, operational performance and the Modern Enterprise Resource Planning (ERP) transformation.
Added 1 hour ago
DT
Senior Power Electronics Engineer
Delta-Q Technologies
Vancouver, BC
- Full-time
This role is ideal for a hands-on engineer with a proven track record delivering high-performance power electronic products from concept through production. The successful candidate will…
Added 1 hour ago
G
Senior AI Engineer
Guidepoint
Toronto, ON
- Full-time
You'll be an early engineer on a new initiative: taking working prototypes to production and shaping the architecture as the product scope grows. This is a hands-on role with broad…

Percucision

Electronic Hardware Engineer

Greater Montreal Metropolitan Area, QC, Canada

Full-time

Apply About employer

Applications open in a new tab.

Job details

Job type: Full-time
Apply by: Nov 4, 2026
Experience: Ideally 1–5 years of relevant electronics, PCB, or embedded hardware experience.
Posting language: English
Posted: Oct 5, 2026

Original job description

About Percucision

Percucision is a Montreal-based medical technology company developing a next-generation Class II medical device designed to improve how clinicians acquire and use physiological measurements at the point of care.

We are a small, fast-moving team working across mechanical, electrical, software, biomedical, and clinical development as we move our technology from prototype development toward design verification, regulatory submission, and commercialization.

We are looking for a full-time Hardware Engineer who wants to take meaningful ownership of the electronics and PCB architecture of our medical device. The role is centered on hardware design, board-level integration, sensor interfaces, bring-up, troubleshooting, and verification, with firmware used as a supporting tool for hardware development and validation.

Professional engineering licensure (P.Eng./ing.) or eligibility for membership with the Ordre des ingénieurs du Québec (OIQ) is strongly preferred.

The Role

This is a hands-on electronics and embedded hardware role with significant technical ownership.

You will help lead the design and development of the electronic hardware inside our medical device, from system architecture, schematic capture, component selection, and PCB design through board bring-up, debugging, integration, and verification. Your work will include microcontrollers, power supplies, analog and digital signal chains, sensors, communication interfaces, connectors, and the supporting circuitry required to build a robust and manufacturable product.

A strong ability to read and interpret component and sensor datasheets is essential. You will be expected to translate specifications such as pinouts, timing requirements, electrical characteristics, power needs, communication protocols, calibration requirements, and environmental limits into practical hardware design decisions and validation plans.

You will also work with embedded firmware when needed for board bring-up, sensor configuration, data acquisition, and troubleshooting, but the primary emphasis of this role is hardware and PCB design.

As part of a lean engineering team, you will have visibility across the complete product and contribute to technical decisions that directly influence performance, reliability, manufacturability, verification, and regulatory readiness.

For candidates with professional engineering licensure, the role may also include greater responsibility for engineering review, technical oversight, and professional engineering activities within their area of expertise.

What You’ll Do

Own or contribute directly to electronic system architecture, schematic capture, component selection, PCB design/layout review, and prototype iterations.
Design and validate power regulation, analog and digital circuitry, sensor interfaces, microcontroller connections, communication buses, connectors, protection circuitry, and supporting electronics.
Perform detailed datasheet reviews and translate component requirements into practical circuit design, PCB, integration, and validation decisions.
Bring up and debug prototype PCBs using oscilloscopes, multimeters, logic analyzers, bench power supplies, debuggers, soldering/rework equipment, and other laboratory tools.
Integrate and validate sensors and embedded components, troubleshooting issues across electronics, wiring, firmware, mechanical integration, and test setups.
Use and modify embedded C/C++ firmware and Python tools as needed for board bring-up, sensor configuration, data acquisition, debugging, and automated testing.
Support design verification, engineering reviews, risk management, root-cause investigations, technical documentation, and traceability within a regulated medical-device development process.
Collaborate with mechanical, software, quality, regulatory, clinical, and manufacturing partners to move designs from prototype through verification and commercialization.

What We’re Looking For

Degree in Electrical Engineering, Electronics Engineering, or a closely related engineering discipline.
Ideally 1–5 years of relevant electronics, PCB, or embedded hardware experience. Recent graduates with a Master’s degree in Microelectronics, Embedded Systems, or a closely related field are also strongly encouraged to apply.
Hands-on experience with PCB and circuit design, including schematic capture, component selection, board bring-up, and hardware debugging; experience with Altium, KiCad, or similar tools is an asset.
Strong understanding of analog and digital electronics, power supplies, grounding, signal integrity, sensor interfaces, microcontrollers, and common communication protocols such as I²C, SPI, UART, USB, and BLE.
Excellent datasheet interpretation skills and the ability to turn component specifications into sound hardware design and test decisions.
Comfortable using oscilloscopes, multimeters, logic analyzers, debuggers, soldering/rework tools, and general electronics lab equipment.
Working knowledge of C/C++ and Python for hardware bring-up, sensor communication, testing, and debugging; deep application-software experience is not required.
Strong problem-solving, technical documentation, and multidisciplinary collaboration skills.
P.Eng./ing. and OIQ membership strongly preferred, or eligibility to obtain professional licensure.
Experience with medical devices, regulated products, or formal design-control environments is an asset.

Bonus

Experience in any of the following would be considered an asset:

Mixed-signal, analog front-end, or low-noise sensor circuit design
Low-power embedded hardware and battery-powered device design
PCB layout, design for manufacturability (DFM), design for test (DFT), and production handoff
EMC/EMI, ESD protection, grounding, shielding, and pre-compliance troubleshooting
STM32, nRF52, ARM Cortex, or similar microcontroller platforms
Bluetooth / BLE hardware integration and RF considerations
Physiological, biomedical, pressure, optical, or other precision sensor interfaces
Signal processing and sensor validation
Hardware-in-the-loop and automated hardware verification
RTOS-based embedded development or firmware debugging
Medical devices or other safety-critical / regulated products
IEC 60601 electrical safety / EMC concepts
ISO 13485 quality-management systems
ISO 14971 medical-device risk management
FDA 510(k) or Health Canada medical-device development environments
Previous responsibility for engineering design reviews or technical approval in a regulated environment

Why Percucision?

Build electronic hardware intended for clinical use in healthcare.
Take real ownership of PCB architecture, circuit design, sensor integration, board bring-up, and hardware verification.
Work across electronics, embedded systems, mechanical integration, testing, manufacturing, quality, and regulatory development.
Influence technical decisions directly within a small, multidisciplinary engineering team.
Contribute to engineering review, technical oversight, verification, and design decisions.
Help bring a medical device from prototype through commercialization.
Montreal-based with in-person collaboration.

We’re looking for someone who enjoys designing circuits, reading datasheets, building and debugging hardware, solving complex technical problems, and taking ownership of challenges from initial concept through validated implementation.

Apply About employer

More about this job

Responsibilities

Design and develop electronic hardware for a medical device, including system architecture, schematics, component selection, PCB design, sensor integration, and prototype bring-up. Debug and verify hardware, use firmware and Python tools as needed, and collaborate across engineering, quality, regulatory, clinical, and manufacturing teams to support commercialization.

Requirements

A degree in Electrical Engineering, Electronics Engineering, or a closely related discipline is sought, along with ideally 1–5 years of relevant experience; recent graduates with a related master’s degree are also encouraged to apply. Candidates should have hands-on PCB and circuit design experience, strong electronics and datasheet skills, familiarity with lab equipment and embedded C/C++ and Python, and preferably P.Eng./ing. licensure or eligibility for OIQ membership.

Skills

PCB Design
Circuit Design
Hardware Bring-Up and Debugging
Analog and Digital Electronics
Sensor Interfaces
Microcontrollers
Power Supplies
Datasheet Interpretation
Embedded C/C++
Python
Hardware Verification
Signal Integrity
Communication Protocols
Design for Manufacturability
Medical Device Development
Technical Documentation

Visa sponsorship

Not detected in the job text

Keywords

Electronic Hardware
PCB Design
Schematic Capture
Component Selection
Altium
KiCad
Analog Electronics
Digital Electronics
Power Regulation
Signal Integrity
Sensor Interfaces
Microcontrollers
I²C
SPI
UART
USB
Bluetooth Low Energy
Embedded C/C++
Python
Oscilloscopes
Logic Analyzers
Board Bring-Up
Design Verification
Design for Manufacturability
EMC/EMI
IEC 60601
ISO 13485
ISO 14971
Medical Devices
OIQ

Report this job