Engineering & architecture jobs in Canada

Group jobs by employerEmail me new jobs Save this search

Added 1 month ago
TO
Landscape Architect
Town of Whitby
Whitby, ON · Iroquois Park Sports Centre
- Full-time
A post secondary degree in Landscape Architecture from a recognized instit
Added 1 month ago
J
Construction estimator
Jimqui
Beauceville, QC
- From $36 CAD / hour
- Full-time
- On-site
Added 1 month ago
NE
Electronics technician
NOVA EV ELECTRONIC LAB
Markham, ON
- $21 to $25 CAD / hour
- Full-time
- Part-time
- Contract
- On-site
Added 1 month ago
C
Electrical Engineer / System Integrator
Canal
North Vancouver, BC
- Full-time
…sheets, measurements and functional descriptions) to produce engineering designs, drawings, recommendations and instructions for project stakeholders. As a part of a discipline team,…
Added 1 month ago
HP
Director of Engineering
HCR Permanent Search
Cambridge, ON · Greater Kitchener-Cambridge-Waterloo Metropolitan Area
- $160,000 to $180,000 CAD / year
- Full-time
…the Kitchener Waterloo area. They are searching for a senior engineering leader responsible for design, quality, and code compliance for their nuclear manufacturing…
Added 1 month ago
TO
Landscape Architect
Town of Whitby
Whitby, ON
- Full-time
A post secondary degree in Landscape Architecture from a recognized instit
Added 1 month ago
BL
Control systems engineer
BoldMAC Ltd
Brandon, MB
- $72,768.66 to $99,128 CAD / year
- Full-time
- On-site
Added 1 month ago
TC
Quality control engineer
Trans-United Consultants Ltd.
Whitby, ON
- $75,000 to $80,000 CAD / year
- Full-time
- On-site
Added 1 month ago
TT
Intermediate – Instrumentation Engineer – Calgary Office
TWD Technologies Ltd.
Calgary, AB
- Contract
As an Instrumentation Engineer in our Calgary office, you will provide engineering design, analysis, and technical support for instrumentation and control systems across projects within the…
Added 1 month ago
Senior Environmental Planner -Water infrastructure
WSP
Burlington, ON
With an unmatched breadth and depth of engineering, advisory and science‑based expertise, our global minds unite to power local solutions.
Added 1 month ago
Environmental Planner
WSP
Toronto, ON
With an unmatched breadth and depth of engineering, advisory and science‑based expertise, our global minds unite to power local solutions.
Added 1 month ago
Materials Engineer / Materials Testing and Inspection Specialist
WSP
Vancouver, BC
With an unmatched breadth and depth of engineering, advisory and science-based expertise, our global minds unite to power local solutions.
Added 1 month ago
Senior Environmental Planner
WSP
Toronto, ON
With an unmatched breadth and depth of engineering, advisory and science‑based expertise, our global minds unite to power local solutions.
Added 1 month ago
N
Mining Engineer
Nutrien
Sussex, NB
- Full-time
Provide professional engineering support for underground and surface mining operations in areas such as mine planning and design, ventilation, ground control, rock mechanics, geological…
Added 1 month ago
DC
Environmental Planner
Dillon Consulting Limited
Calgary, AB · Edmonton, AB
- Full-time
…employee-owned professional consulting firm specializing in planning, engineering, environmental science, and management. With over 25 offices and more than 1100 employees across Canada, we…
Added 1 month ago
CT
Security Systems Technician - Service Focused
Convergint Technologies Ltd
Mississauga, ON
- $30 to $38 CAD / hour
Valid driver’s license required
Added 1 month ago
Electrical Controls Engineer
Florida Crystals / ASR Group
Toronto, ON
Demonstrated ability to communicate effectively both verbally and written to work effectively with peers, plant operating staff, and other engineering resources.
Added 1 month ago
TA
Certified Aircraft Avionics Technician (Temporary - 6 months)
Transat AT
Quebec, QC
- Full-time
Added 1 month ago
B
Senior Mechanical Engineer
BGIS
Markham, ON
- Full-time
Must have a valid Class G license and vehicle in order to travel throughout Ontario for projects
Added 1 month ago
H
Biomedical Engineering Technologist Supervisor
HealthCareersInSask.ca
Prince Albert, SK
- Full-time
Job Description: Responsible for the supervision and administration of the Clinical Engineering services.
Added 1 month ago
B
Senior Mechanical Engineer
BGIS
Markham, ON
- Full-time
Must have a valid Class G license and vehicle in order to travel throughout Ontario for projects
Added 1 month ago
H
Biomedical Engineer Technologist
HealthCareersInSask.ca
Prince Albert, SK
- Full-time
Biomedical Engineering Technology diploma (BMET)
Added 1 month ago
C
Senior Product Designer
Caribou
Remote, Canada
- $120,000 to $160,000 CAD / year
- Full-time
- Remote
You’ll be the senior designer on a small, highly collaborative product team, partnering closely with Product, Engineering and Customer Success. You’ll shape experiences across web, mobile,…
Added 1 month ago
EI
Highway Engineer
Egis in Canada
Toronto, ON
- $80,000 to $120,000 CAD / year
- Full-time
…roundabout projects. The position operates within a consulting engineering environment and requires oversight of technical delivery, quality management, stakeholder coordination, project…
Added 1 month ago
S
Senior Structural Engineer
Sedgman
Vancouver, BC
- Full-time
…responsible for leading and providing technical support on structural engineering projects; this includes conducting structural design, investigation, managing project budgets and…

Porter Engineered Systems - A Division of Pangeo Group

Manufacturing Engineer

Windsor, ON, N8T 0A6, Canada

Compensation: CAD $80,000 to $110,000 · Full-time

Apply on porterengineeredsystems.applytojob.com About employer

Applications open in a new tab.

Job details

Pay: Compensation: CAD $80,000 to $110,000
Job type: Full-time
Apply by: Dec 29, 2026
Experience: 7+ years of proven shop floor manufacturing engineering experience, preferably in the automotive industry.
Posting language: English
Posted: Sep 30, 2026

Original job description

Position Summary:
The Manufacturing Engineer designs and implements the manufacturing processes that deliver the plant's production goals for safety-critical powertrain components in a high-volume automotive environment. The role works with Production, Quality, Maintenance and Program Management to raise productivity, quality and efficiency, and supports new equipment and new product launches from process design through stable production.
Key Responsibilities:
Process Design and Implementation

Develop, evaluate and improve manufacturing methods, drawing on product design, materials and parts, fabrication processes, tooling and equipment capability, assembly methods and quality standards.
Work with product development engineers to bring new products into the manufacturing process.

Automation

Design, build and implement automation that improves production efficiency and quality.

Cost Reduction and Efficiency

Identify cost reduction opportunities, then plan and implement them to improve operational efficiency.

Quality

Work closely with Quality so manufacturing processes meet IATF 16949 requirements, industry standards and customer specifications.

Equipment Selection and Maintenance

Make the technical decisions on new manufacturing equipment purchases.
Coordinate maintenance and repair of manufacturing equipment to keep downtime low.

Continuous Improvement

Apply lean manufacturing and Six Sigma principles to eliminate waste, improve processes and reduce variability in production.

Documentation and Compliance

Develop and maintain manufacturing documentation, including process flow charts, work instructions and standard operating procedures (SOPs).
Comply with the Ontario Occupational Health and Safety Act (OHSA), WHMIS, WSIB and environmental requirements, including ISO 14001.

Support and Training

Provide technical support and training to production staff.

Competencies / Behaviors

Ownership mentality: takes full responsibility for process performance and results.
Collaborative team player: works openly with cross-functional teams, builds trust and resolves challenges together.
Participates in the Open-Door Resolution Process and models PES's operational procedures and policies.
Ensures suppliers work safely in operations work areas and zones when applicable.
Conducts themselves professionally and maintains peer relationships.
Other duties as required.

Required Qualifications:

Bachelor's degree in Manufacturing, Mechanical or Industrial Engineering, or a related field.
7+ years of proven shop floor manufacturing engineering experience, preferably in the automotive industry.
Strong understanding of manufacturing processes, equipment and technology.
Experience with CAD software and proficiency in designing manufacturing layouts.
Knowledge of lean manufacturing, Six Sigma or other continuous improvement methodologies.
Strong problem-solving and analytical skills.
Strong communication and interpersonal skills, and able to work in a team environment.
Willing to travel as needed to support operations at other sites or to evaluate new technologies and equipment.
Available outside regular hours when needed to resolve urgent production issues or meet project deadlines.

Key Performance Indicators (KPIs):

Scrap rate: reduction in defects and waste.
OEE (Overall Equipment Effectiveness): uptime and productivity of the equipment supported.
Cycle time: throughput and efficiency improvement.
Improvement projects: number of projects initiated and completed.
Cost savings: annual cost savings achieved.

Responsibilities and Working Conditions:
Under the general direction of the Manufacturing Engineering Manager / Supervisor, the Manufacturing Engineer works independently and confers regularly with division and corporate employees, contractors, customers and suppliers. Travel and overtime may be required to meet customer expectations. A valid driver's license and passport are required for travel. The role works in a manufacturing plant environment and will be exposed to some elements such as temperature and noise.

Reporting
Department: Manufacturing Engineering
Reports to: Manufacturing Engineering Manager / Supervisor

Eligibility Requirements:
Must be legally eligible to work in Canada. This position is based at 6500 Cantelon Drive, Windsor, Ontario.

Compensation: CAD $80,000 to $110,000

Equal opportunity & accessibility
Pangeo Group is proud to be an equal opportunity employer. We welcome applications from all qualified candidates regardless of race, ancestry, place of origin, colour, ethnic origin, citizenship, creed, sex, sexual orientation, gender identity or expression, age, marital status, family status, or disability.
Accommodations are available on request throughout the recruitment process in accordance with the Accessibility for Ontarians with Disabilities Act (AODA). If you require accommodation, please let us know and we will work with you to meet your needs.
AI in hiring: We use artificial intelligence to screen and assess applications for this posting, in accordance with the job-posting disclosure requirements of Ontario's Employment Standards Act.

Apply on porterengineeredsystems.applytojob.com About employer

More about this job

Responsibilities

The Manufacturing Engineer designs and implements manufacturing processes to meet production goals for safety-critical powertrain components. They collaborate with cross-functional teams to improve productivity, quality, and efficiency while managing equipment selection and maintenance.

Requirements

Candidates must hold a Bachelor's degree in Manufacturing, Mechanical, or Industrial Engineering. A minimum of 7 years of shop floor manufacturing experience, preferably in the automotive industry, is required.

Skills

Manufacturing engineering
Process design
Automation
Lean manufacturing
Six Sigma
CAD software
Equipment maintenance
Quality control
IATF 16949
Problem-solving
Analytical skills
Project management
Technical documentation
Communication
Teamwork

Visa sponsorship

Not detected in the job text

Keywords

Manufacturing Engineering
Powertrain Components
Automotive Industry
Process Design
Automation
Cost Reduction
IATF 16949
Equipment Maintenance
Lean Manufacturing
Six Sigma
CAD
Process Flow Charts
SOP
OHSA
WHMIS
WSIB
ISO 14001
Continuous Improvement
OEE
Cycle Time
Scrap Rate
Shop Floor
Technical Support
Project Management
Analytical Skills

Report this job

Hiring at a glance

Advertised starting pay

Where work happens

Engineering & architecture jobs in Canada

Landscape Architect

Construction estimator

Electronics technician

Electrical Engineer / System Integrator

Director of Engineering

Landscape Architect

Control systems engineer

Quality control engineer

Intermediate – Instrumentation Engineer – Calgary Office

Senior Environmental Planner -Water infrastructure

Environmental Planner

Materials Engineer / Materials Testing and Inspection Specialist

Senior Environmental Planner

Mining Engineer

Environmental Planner

Security Systems Technician - Service Focused

Electrical Controls Engineer

Certified Aircraft Avionics Technician (Temporary - 6 months)

Senior Mechanical Engineer

Biomedical Engineering Technologist Supervisor

Senior Mechanical Engineer

Biomedical Engineer Technologist

Senior Product Designer

Highway Engineer

Senior Structural Engineer

Contact us

Advertised starting pay

Where work happens

Work requirements

Engineering & architecture jobs in Canada