Engineering & architecture jobs in Canada

Explore engineering & architecture jobs in Canada. Choose a role or place to find work that fits.

Counted Oct 9, 2026

Hiring at a glance

View jobs

Open jobs: 4,874
Employers: 1,589

Advertised starting pay

Average starting payCAD / year: $101,984Across 689 listings
Average starting payCAD / hour: $38.21Across 123 listings
Average starting payUSD / year: $133,670Across 29 listings

Employer-advertised starting pay, not employee salaries. Currencies and pay periods stay separate.

Where work happens

Remote: 2%98 listings
Hybrid: 36%1,769 listings
On-site: 61%2,992 listings

Not specified: <1% (15 listings)

Employers hiring include WSP in Canada (293), AtkinsRéalis (138), Stantec (136).

Sources & calculation notes

These figures describe the listings on this role page at the date shown, not the whole job market. Listings can change.

Employer-listed minimums from at least 10 listings per currency and pay period. These are advertised starting amounts, not employee salaries. Jobs without a minimum and unusual amounts are excluded.

Hybrid and on-site classifications may be inferred from descriptions. Check the original ad. How we count

Engineering & architecture jobs in Canada

Email me new jobs Save this search

Added 11 mins ago
J
Senior Structural Engineer – Buildings
JLR
Ottawa, ON
- Full-time
Added 11 mins ago
BG
Planner
Berean Group International, Inc.
Saskatoon, SK
- Contract
Added 11 mins ago
H
Lead Mechanical Engineer
Hydrostor
Toronto, ON
- $150,000 to $190,000 CAD / year
- Full-time
Added 11 mins ago
IE
Mechanical Engineer (Project Manager)
Impact Engineering
Vancouver, BC
- Full-time
Impact Engineering is currently seeking a Professional Mechanical Engineer to lead projects at our Impact HQ, Buildings Engineering team, located in Vancouver, BC.
Added 12 mins ago
H
Biomedical Engineer Technologist
HealthCareersInSask.ca
Saskatoon, SK
- Full-time
Added 12 mins ago
Mechanical Engineer (P.Eng)
Trench Group GmbH
Toronto, ON
…for seamless energy transmission. With a legacy of customized engineering and innovation, we enable society to harness the power of electricity with reliability and…
Added 17 mins ago
EM
Senior estimator - construction
EMPIRE MASONRY LTD.
Langley, BC
- $110,000 to $130,000 CAD / year
- Full-time
- On-site
Added 27 mins ago
Electrical Engineer
Primero Group
ON
Added 27 mins ago
W
Senior Technical Consultant, Environmental Engineer
Worley
Cold Lake, AB · Edmonton, AB · Calgary, AB
- Full-time
Added 33 mins ago
DS
Security alarms installer
DOMOTICS SECURITY SYSTEMS INC.
Delta, BC
- From $39 CAD / hour
- Full-time
- On-site
Added 41 mins ago
CI
Mechanical Engineer
Cenergy International Services
Calgary, AB
- Contract
Bachelor's degree in Mechanical Engineering or equivalent recognized qualification.
Added 41 mins ago
A
Environmental Engineer-Remediation Design
AECOM
AB · Edmonton, AB
- $85,000 to $110,000 CAD / year
- Full-time
Added 42 mins ago
Manufacturing Technician - Test
INNIO
Welland, ON
Added 48 mins ago
FS
Wireless communications network engineer
F2G Solutions
Toronto, ON
- $53 to $55 CAD / hour
- Full-time
- On-site
Added 52 mins ago
IÉ
Mechanical engineer
Innergex énergie renouvelable inc.
Vancouver, BC
- $90,100 to $95,000 CAD / year
- Full-time
- On-site
Added 57 mins ago
GS
Electrical Engineer/Designer
Grantek Systems Integration
Burlington, ON
- Full-time
Added 1 hour ago
T
Draftsman/woman
Témisko
Notre-Dame-du-Nord, QC
- $23 to $33 CAD / hour
- Full-time
- On-site
Added 1 hour ago
B
Engineering Manager - Infrastructure
BitGo
Toronto, ON
- Full-time
Added 1 hour ago
W
Senior Civil Engineer - Ressources
WSP
Sudbury, ON
- Full-time
…innovative world shapers. With an unmatched breadth and depth of engineering, advisory and science-based expertise, our global minds unite to power local solutions. We are pathfinders and…
Added 1 hour ago
MV
Draftsperson II
Metro Vancouver
Burnaby, BC
- Full-time
Our Water Services Department is seeking a Draftsperson II who will work with our engineering and CAD teams to prepare and deliver engineering drawings related to Metro Vancouver’s…
Added 1 hour ago
A
Civil Engineer
Actalent
New Westminster, BC
- $130,000 to $150,000 CAD / year
- Full-time
Actalent Services is a growing engineering consulting organization with a strong presence in Western Canada supporting utility infrastructure projects. We are seeking a highly experienced…
Added 1 hour ago
G
Electrical Engineer/Designer
Grantek
Burlington, ON
- Full-time
Added 1 hour ago
GS
Product Designer
GG Studio
NB · Chiasson Office, NB
- Full-time
Added 1 hour ago
E
Senior Structural Engineer
EXP
Barrie, ON
- Full-time
Added 1 hour ago
E
Senior Structural Engineer
EXP
Sudbury, ON
- Full-time

PreciKam

INJECTION MOULDING TECHNICIAN

Montreal, QC, Canada

Full-time

Apply About employer

Applications open in a new tab.

Job details

Job type: Full-time
Apply by: Nov 6, 2026
Experience: 3 to 5 years’ experience in a similar position or have equivalent training.
Posting language: English
Posted: Oct 8, 2026

Original job description

Summary Of Function

The level II injection moulding technician prints the work orders for each machine according to the IQMS daily schedule, ensures the transfer of information between the Tools Room, Material Preparation and Production departments, and ensures the proper operation of the machines and auxiliary equipment.

Ensures compliance with quality standards and identifies mould defects by discussing them with superiors.

Performs tasks related to maintaining a clean, safe working environment and ensures that resin requirements for machines are monitored and maintained.

Installs and uninstalls moulds correctly and connects peripherals.

Performs tests for repaired moulds.

Fills out daily production reports and arranges for layout in the IQMS.

Maintains cycle times; adjusts times and explains deviations, if necessary.

Major Duties And Responsibilities

Maintain a safe and clean working environment by following established company policies and procedures.
Hanging and removing moulds on plastic injection moulding machines.
Connect the cooling circuits according to the cooling chart.
Connect the mould heating units if required.
Connect the switch limits for mould safety if required.
Connect hydraulic or pneumatic cores if required.
Enter the injection parameters for each mould installed.
Fill out the forms and forms for each mould installed or removed.
Carefully follow the instructions of the level III injection moulding technician, assist if necessary.
Report any safety, operational or quality problems to the level III injection moulding technician or person in charge.
Ensure that all machinery and equipment in production under your direct control is operating properly to minimize damage and downtime.
Participate in all training sessions and meetings as required.
Participate in the corrective action process in the event of non-compliance.
Visually inspect the parts produced at the beginning of each shift.
Detect any contamination of the parts or any other obvious visual defect and correct the defect.
Check material dryers and hoppers for clean and properly filled material at the beginning of each shift.
Clean dryer and loader filters if the floor person is not available.
Make sure that workshop safety and cleanliness procedures are followed and maintained.
Assist and train new Level I and II technicians whenever necessary.
Adjusts secondary operations as required.
Assists as a material handler as required.
Ensures that assembly procedures are followed and that careful adjustments are made, if necessary.
Optimize machine cycle time and mould changeover time.
Check "pre-production parts" before submitting them to the quality department.
Ensure that safety rules are respected and maintained in the factory.
Be aware of, understand and adhere to the company's core values of accuracy, respect, importance and credibility.
Know and respect the company's quality policies and objectives.
Promote a safe and clean work environment by following the company's established policies and procedures.
Ensure that all parts produced meet or exceed customer and company quality standards.
Layered Process Auditing (LPA).
Required to occasionally work an alternate shift to achieve business requirements.
Perform additional tasks as determined by the supervisor.

Educational Requirements

High school, technical vocational training that is appropriate for the position.

Or equivalent experience as judged by the hiring manager to their satisfaction.

Experience Requirements

3 to 5 years’ experience in a similar position or have equivalent training.

Basic knowledge of plastic raw material and proper handling and drying procedures. Understand the technical data sheets of the raw materials in relation to the technical data sheets of the moulds. Be able to operate all machines in the moulding department. Be able to understand and apply the inspection procedures as defined in the inspection plans.

Other Requirements

Must be able to be registered with Canada’s Controlled Goods Program. This involves a criminal background check conducted by an authorized third party.

At any point during the recruitment or employment process, candidates or employees may be asked to complete a personality or psychometric test relevant to the role.

Why Join Us

Working for an industry leader in the manufacture of precision plastic injected parts that are important to people’s health and safety.

PreciKam Is Proud Of Our Diverse Team. We Come From Every Continent, Speak Over 18 Languages Represent Many Races, Genders, Identities, And Beliefs (or Not). However, We All Share Some Common Traits

We respect each other and the skills and talents we each have.

We are good at our jobs and are proud that we make products that have an impact of people’s health and safety.

We value education and experience regardless of what country you earned it in.

We are all strong individuals who understand the power and value of a team.

We do what we say we are going to do.

Enjoy a warm and inviting culture in a clean and bright workplace.

What We Offer

Competitive pay and benefits including extended healthcare, dental care, disability insurance life insurance, employee assistance program, online doctor.

RRSP program.

Fitness subscription Subsidy.

Training offered in 3 languages, French, English, Hindi.

Paid time off.

Company events.

The best fair-Trade coffee, Cappuccinos, etc. Free to every team member.

Our West Island location is easily accessible by car. We have free on-site parking.

Career opportunities: nine of our last ten promotions (including two members of our executive team) have been internal.

Apply About employer

More about this job

Responsibilities

Install and remove moulds, set up and operate injection moulding machines and auxiliary equipment, monitor materials, and optimize cycle and changeover times. Inspect production parts, maintain quality and safety standards, complete production records, and report operational or quality issues.

Requirements

Requires high school education and appropriate technical vocational training, or equivalent experience, plus 3 to 5 years in a similar role or equivalent training. Candidates should understand plastic raw materials and drying procedures, operate moulding department machines, interpret material and mould technical data sheets, and apply inspection procedures.

Skills

Injection Moulding
Mould Installation and Removal
Machine Operation
Injection Parameter Setup
Mould Changeovers
Cycle Time Optimization
Quality Inspection
Defect Detection
Raw Material Handling
Material Drying
Equipment Maintenance
Production Reporting
IQMS
Safety Compliance
Corrective Action
Training and Mentoring

Benefits

Extended Healthcare
Dental Care
Disability Insurance
Life Insurance
Employee Assistance Program
Online Doctor
RRSP Program
Fitness Subscription Subsidy
Training
Paid Time Off
Company Events
Free Coffee

Visa sponsorship

Not detected in the job text

Keywords

Injection Moulding
Plastic Injection Moulding Machines
IQMS
Mould Installation
Mould Removal
Cooling Circuits
Mould Heating Units
Switch Limits
Hydraulic Cores
Pneumatic Cores
Injection Parameters
Plastic Raw Materials
Material Dryers
Hoppers
Technical Data Sheets
Inspection Plans
Quality Standards
Visual Inspection
Cycle Time
Mould Changeover
Auxiliary Equipment
Production Reporting
Corrective Action
Layered Process Auditing
Controlled Goods Program

Report this job