Jobs in Canada

25+ jobs

Email me new jobs Save this search

Added 3 mins ago
IW
Business Systems Analyst & Developer - Data, AI & Agentic Automation
Innotech Windows + Doors
Langley (District), BC · Langley, BC
- Full-time
Degree or diploma in Computer Science, Information Technology, Data Science, Business Analytics, Engineering, or a related field, or equivalent practical experience.
Added 3 mins ago
M
Project Manager, IM-Related Level 2
Mindtris
Victoria, BC
- Full-time
Job Title: Project Manager, IM-Related Level 2
Added 3 mins ago
TO
Workovers &DHR&M Engineering Student
Tundra Oil & Gas
Virden, MB
- Internship
Tundra has an opportunity for a Workovers and Downhole Repair & Maintenance Engineering Student for the summer of 2027 (May-August) based out of the Virden, Manitoba office.
Added 3 mins ago
TO
Maintenance Summer Student
Tundra Oil & Gas
Virden, MB
- Internship
Added 3 mins ago
TO
Drafting/Design Student
Tundra Oil & Gas
Virden, MB
- Internship
In progress of obtaining a post-secondary education in an Engineering Technology field
Added 3 mins ago
ME
Manager 3D CADD & Revit Implementation
Morson Edge (Canada)
Toronto, ON · North York, ON
- $65 to $85 CAD / hour
- Contract
Job Title: Manager – 3D CADD & Revit Implementation
Added 3 mins ago
RG
Accounting & Consolidation Manager
Ramudden Global North America
Markham, ON
- Full-time
Reporting to the Corporate Controller, the Accounting & Consolidation Manager will play an important role in our North American Finance team, overseeing corporate accounting, financial…
Added 5 mins ago
RB
Sr. Manager, Construction, Tim Hortons, Canada (Fixed Term - 8 months)
Restaurant Brands International
Toronto, ON · Corp - Toronto Corporate Office
- Full-time
Bachelor's degree in engineering, architectural design or construction management
Added 5 mins ago
JC
Shift Engineer/ Building Operator
Johnson Controls
Kelowna, BC · Interior Heart and Surgical Centre
- Full-time
The O&M Stationary Engineer reports directly to the Operations Manager while the Chief Engineer will guide you through building operations and the Technical Safety Authority regulations and…
Added 5 mins ago
Project Engineer - Electrical Construction
Kiewit
Toronto, ON
…be the main conduit of information between the construction manager and the team for cost, revenue, cash flow information. Do you have strong mentorship skills? You will have the…
Added 5 mins ago
A
Data Storage Manager
ATCO
Calgary, AB
- Full-time
…powers and protects a diverse global business. As Data Storage Manager, you'll lead the evolution of critical enterprise storage and cyber resiliency solutions, influencing long-term…
Added 5 mins ago
E
Senior MEP Manager
EllisDon
London, ON · ON · Ontario Projects
- Full-time
Provide constructability and value engineering reviews.
Added 5 mins ago
MT
Product Manager
Mach7 Technologies
Waterloo, ON
- Full-time
…clinicians when and where they need them. As the eUnity Product Manager, you will work directly with customers and our teams to shape the future of eUnity and make medical imaging workflows…
Added 5 mins ago
Project Manager Civil
EBC Inc.
Mississauga, ON
Inform Senior Project Manager of project development and discuss methods planned to meet schedule and budget;
Added 5 mins ago
Project Manager Civil
EBC Inc.
Mississauga, ON
Inform Senior Project Manager of project development and discuss methods planned to meet schedule and budget;
Added 5 mins ago
E
Engineer in Training I
Enbridge
Edmonton, AB
- Full-time
…Enbridge’s liquids pipeline system safe and reliable. You will apply engineering fundamentals to pipeline integrity assessments involving corrosion, cracking, and deformation threats while…
Added 5 mins ago
Senior Manager, Program Controls, Data Center Construction
Bell
Regina, SK
…mission-critical data centre infrastructure. The Program Controls Manager will establish and maintain the governance processes that connect departments, projects, and stakeholders across…
Added 5 mins ago
Project Risk Manager
Alstom
Toronto, ON
Could you be the full-time Senior Risk Manager in Toronto we’re looking for?
Added 11 mins ago
MC
Supply chain manager
Miebach Consulting, Inc.
Montréal, QC
- $150,000 to $200,000 CAD / year
- Full-time
- Hybrid
Added 20 mins ago
RM
Project Manager, Environmental Assessment and Studies
Regional Municipality of Peel
Brampton, ON
- Other
University/College degree in Civil or Environmental Engineering combined with a minimum of 5 years relevant experience, P. Eng preferred
Added 20 mins ago
SE
Product Support Sales Representative
SMS Equipment Inc.
Regina, SK
- Full-time
Coordinate all service, warranty, billing, and equipment issues to the appropriate SMS manager. Main point of contact in resolving such issues.
Added 20 mins ago
A
Environmental Engineer-Remediation Design
AECOM
AB · Edmonton, Alberta
- $85,000 to $110,000 CAD / year
- Full-time
Bachelor’s Degree in a relevant engineering discipline (Civil, Geotechnical, Environmental etc.)
Added 20 mins ago
A
Multimedia Design Manager
AECOM
Markham, ON
- $96,000 to $130,000 CAD / year
- Full-time
The Multimedia Design Manager is responsible for managing the Graphic Design team for the Canada Region Marketing Team and driving the development of high-quality visual communications that…
Added 20 mins ago
BR
Talent Acquisition Specialist
Brodie Rec League
Toronto, ON
- $90,000 to $115,000 CAD / year
- Full-time
…Scorekeepers and Athlete Experience Specialists on the floor to the Engineering and Corporate teams at Toronto HQ. The Talent Acquisition Specialist runs full-cycle recruiting across that…
Added 20 mins ago
R
Principal Product Manager
REDCAN
Remote, Canada
- $150,000 to $190,000 CAD / year
- Full-time
- Remote
Company: Research Engineering Design Canada, Inc ('Redcan')

PreciKam

INJECTION MOULDING TECHNICIAN

Montreal, QC, Canada

Full-time

Apply About employer

Applications open in a new tab.

Job details

Job type: Full-time
Apply by: Nov 6, 2026
Experience: 3 to 5 years’ experience in a similar position or have equivalent training.
Posting language: English
Posted: Oct 8, 2026

Original job description

Summary Of Function

The level II injection moulding technician prints the work orders for each machine according to the IQMS daily schedule, ensures the transfer of information between the Tools Room, Material Preparation and Production departments, and ensures the proper operation of the machines and auxiliary equipment.

Ensures compliance with quality standards and identifies mould defects by discussing them with superiors.

Performs tasks related to maintaining a clean, safe working environment and ensures that resin requirements for machines are monitored and maintained.

Installs and uninstalls moulds correctly and connects peripherals.

Performs tests for repaired moulds.

Fills out daily production reports and arranges for layout in the IQMS.

Maintains cycle times; adjusts times and explains deviations, if necessary.

Major Duties And Responsibilities

Maintain a safe and clean working environment by following established company policies and procedures.
Hanging and removing moulds on plastic injection moulding machines.
Connect the cooling circuits according to the cooling chart.
Connect the mould heating units if required.
Connect the switch limits for mould safety if required.
Connect hydraulic or pneumatic cores if required.
Enter the injection parameters for each mould installed.
Fill out the forms and forms for each mould installed or removed.
Carefully follow the instructions of the level III injection moulding technician, assist if necessary.
Report any safety, operational or quality problems to the level III injection moulding technician or person in charge.
Ensure that all machinery and equipment in production under your direct control is operating properly to minimize damage and downtime.
Participate in all training sessions and meetings as required.
Participate in the corrective action process in the event of non-compliance.
Visually inspect the parts produced at the beginning of each shift.
Detect any contamination of the parts or any other obvious visual defect and correct the defect.
Check material dryers and hoppers for clean and properly filled material at the beginning of each shift.
Clean dryer and loader filters if the floor person is not available.
Make sure that workshop safety and cleanliness procedures are followed and maintained.
Assist and train new Level I and II technicians whenever necessary.
Adjusts secondary operations as required.
Assists as a material handler as required.
Ensures that assembly procedures are followed and that careful adjustments are made, if necessary.
Optimize machine cycle time and mould changeover time.
Check "pre-production parts" before submitting them to the quality department.
Ensure that safety rules are respected and maintained in the factory.
Be aware of, understand and adhere to the company's core values of accuracy, respect, importance and credibility.
Know and respect the company's quality policies and objectives.
Promote a safe and clean work environment by following the company's established policies and procedures.
Ensure that all parts produced meet or exceed customer and company quality standards.
Layered Process Auditing (LPA).
Required to occasionally work an alternate shift to achieve business requirements.
Perform additional tasks as determined by the supervisor.

Educational Requirements

High school, technical vocational training that is appropriate for the position.

Or equivalent experience as judged by the hiring manager to their satisfaction.

Experience Requirements

3 to 5 years’ experience in a similar position or have equivalent training.

Basic knowledge of plastic raw material and proper handling and drying procedures. Understand the technical data sheets of the raw materials in relation to the technical data sheets of the moulds. Be able to operate all machines in the moulding department. Be able to understand and apply the inspection procedures as defined in the inspection plans.

Other Requirements

Must be able to be registered with Canada’s Controlled Goods Program. This involves a criminal background check conducted by an authorized third party.

At any point during the recruitment or employment process, candidates or employees may be asked to complete a personality or psychometric test relevant to the role.

Why Join Us

Working for an industry leader in the manufacture of precision plastic injected parts that are important to people’s health and safety.

PreciKam Is Proud Of Our Diverse Team. We Come From Every Continent, Speak Over 18 Languages Represent Many Races, Genders, Identities, And Beliefs (or Not). However, We All Share Some Common Traits

We respect each other and the skills and talents we each have.

We are good at our jobs and are proud that we make products that have an impact of people’s health and safety.

We value education and experience regardless of what country you earned it in.

We are all strong individuals who understand the power and value of a team.

We do what we say we are going to do.

Enjoy a warm and inviting culture in a clean and bright workplace.

What We Offer

Competitive pay and benefits including extended healthcare, dental care, disability insurance life insurance, employee assistance program, online doctor.

RRSP program.

Fitness subscription Subsidy.

Training offered in 3 languages, French, English, Hindi.

Paid time off.

Company events.

The best fair-Trade coffee, Cappuccinos, etc. Free to every team member.

Our West Island location is easily accessible by car. We have free on-site parking.

Career opportunities: nine of our last ten promotions (including two members of our executive team) have been internal.

Apply About employer

More about this job

Responsibilities

Install and remove moulds, set up and operate injection moulding machines and auxiliary equipment, monitor materials, and optimize cycle and changeover times. Inspect production parts, maintain quality and safety standards, complete production records, and report operational or quality issues.

Requirements

Requires high school education and appropriate technical vocational training, or equivalent experience, plus 3 to 5 years in a similar role or equivalent training. Candidates should understand plastic raw materials and drying procedures, operate moulding department machines, interpret material and mould technical data sheets, and apply inspection procedures.

Skills

Injection Moulding
Mould Installation and Removal
Machine Operation
Injection Parameter Setup
Mould Changeovers
Cycle Time Optimization
Quality Inspection
Defect Detection
Raw Material Handling
Material Drying
Equipment Maintenance
Production Reporting
IQMS
Safety Compliance
Corrective Action
Training and Mentoring

Benefits

Extended Healthcare
Dental Care
Disability Insurance
Life Insurance
Employee Assistance Program
Online Doctor
RRSP Program
Fitness Subscription Subsidy
Training
Paid Time Off
Company Events
Free Coffee

Visa sponsorship

Not detected in the job text

Keywords

Injection Moulding
Plastic Injection Moulding Machines
IQMS
Mould Installation
Mould Removal
Cooling Circuits
Mould Heating Units
Switch Limits
Hydraulic Cores
Pneumatic Cores
Injection Parameters
Plastic Raw Materials
Material Dryers
Hoppers
Technical Data Sheets
Inspection Plans
Quality Standards
Visual Inspection
Cycle Time
Mould Changeover
Auxiliary Equipment
Production Reporting
Corrective Action
Layered Process Auditing
Controlled Goods Program

Report this job