Jobs in Canada

25+ jobs

Email me new jobs Save this search

Added just now
ED
Senior Manager Principal, Critical Mineral Investments - 371 EN
Export Development Canada | Exportation et développement Canada
Montréal, QC
- $180,000 to $260,000 CAD / year
- Full-time
- On-site
Senior Manager / Principal, Critical Mineral Investments Applicational deadline: October 16, 2026 Join EDC?s Canada Critical…
Added 1 min ago
RM
Site Lead Carpenter (Residential Construction)
Riverstone Management Ltd.
Saanichton, BC
- $40 to $45 CAD / hour
- Full-time
- On-site
…$40-45/hr, based on experience Reports to: Construction Manager Role level: Intermediate to Senior (depending on experience) About Stillwater …
Added 1 min ago
ED
Senior Manager Principal, Critical Mineral Investments - 371 EN
Export Development Canada | Exportation et développement Canada
Toronto, ON
- $180,000 to $260,000 CAD / year
- Full-time
- On-site
Senior Manager / Principal, Critical Mineral Investments Applicational deadline: October 16, 2026 Join EDC?s Canada Critical…
Added 14 mins ago
KS
Store Manager
kate spade new york
Richmond, BC
- Full-time
As a Store Manager, you are the heartbeat of your store - leading with purpose, driving performance, and creating unforgettable customer experiences that reflect the Coach brand. You set…
Added 14 mins ago
M
Registered Massage Therapist - PT
Marriott
Vancouver, BC
- Part-time
Report accidents, injuries, and unsafe work conditions to manager; complete safety training and certifications. Follow all company policies and procedures; make sure uniform and personal…
Added 14 mins ago
D
Purchasing Specialist
Dilfo
Ottawa, ON
- Full-time
Act as the operational champion for Inventory and Procurement software within Procurement, supporting implementation, user adoption, training, data quality, and consistent use.
Added 27 mins ago
HH
Miramichi Registered Nurse Class A (RNCA) PCN 1750953
Horizon Health Network
Miramichi, NB
- Full-time
…encouraged to apply as an equivalent combination of education, training and experience may be…
Added 27 mins ago
HH
Miramichi Registered Nurse Class A (RNCA) PCN 1750947
Horizon Health Network
Miramichi, NB
- Full-time
…encouraged to apply as an equivalent combination of education, training and experience may be…
Added 27 mins ago
HH
Miramichi Licensed Practical Nurse (LPNA) PCN 1757175
Horizon Health Network
Miramichi, NB
- Full-time
…combination of relevant work experience and related education training will be…
Added 27 mins ago
HH
Miramichi Registered Nurse Class A (RNCA) PCN 1751003
Horizon Health Network
Miramichi, NB
- Full-time
Completes unit specific training & updates same as required
Added 27 mins ago
NF
Project Manager, Strategy & Technology
Nature Fresh Farms
Leamington, ON
- Full-time
We are currently looking to fill a full-time, permanent position for an Enterprise Project Manager, Strategy & Technology in our Administration Department at our Leamington office.
Added 27 mins ago
HH
Miramichi Licensed Practical Nurse (LPNA) PCN 1750553
Horizon Health Network
Miramichi, NB
- Full-time
…combination of relevant work experience and related education training will be…
Added 27 mins ago
HH
Saint John Health Information Professional 2 (HP02) PCN 1253233
Horizon Health Network
Saint John, NB
- Full-time
…encouraged to apply as an equivalent combination of education, training and experience may be…
Added 27 mins ago
W
Procurement Specialist - Project Bid & Start Up X 16 Month Contract
Webuild
Mississauga, ON
- $90,000 to $100,000 CAD / year
- Full-time
We are hiring a Procurement Specialist - Project Bid & Start Up to step into an existing role on our Procurement Team. This position reports to the Procurement Manager.
Added 27 mins ago
PH
Forensic Clinical Care Coordinator
Provincial Health Services Authority
Port Coquitlam, BC
- Full-time
…implementation. Reporting directly to the Clinical Services Manager of the Review Board Department, the Forensic Clinical Care Coordinator leads the hospital evidence at Review Board…
Added 27 mins ago
PH
Administrative Secretary
Provincial Health Services Authority
Vancouver, BC
- Full-time
…miscellaneous expenses and obtaining authorization from administrative…
Added 27 mins ago
HH
Saint John Medical Device Reprocessing Technician (2070) PCN 1253011
Horizon Health Network
Saint John, NB
- Full-time
…encouraged to apply as an equivalent combination of education, training and experience may be…
Added 27 mins ago
HH
Moncton Speech Language Pathologist 1 (SL01) PCN 1005592
Horizon Health Network
Moncton, NB · Greater Moncton Metropolitan Area
- Part-time
…encouraged to apply as an equivalent combination of education, training and experience may be…
Added 27 mins ago
PH
School Psychologist
Provincial Health Services Authority
Vancouver, BC
- Part-time
Reporting to the Program Manager and Head of Psychology, when applicable, and in accordance with the established policies, procedures, standards of practice and guidelines, provides…
Added 27 mins ago
HH
Saint John Nursing Unit Clerk (1027) PCN 1256996
Horizon Health Network
Saint John, NB
- Part-time
…encouraged to apply as an equivalent combination of education, training and experience may be…
Added 27 mins ago
HH
Saint John Medical Laboratory Assistant/Phlebotomist (3041) PCN 9250990
Horizon Health Network
Saint John, NB
- Temporary
…encouraged to apply as an equivalent combination of education, training and experience may be…
Added 27 mins ago
HH
Moncton Registered Nurse Class A (RNCA) PCN 1001302
Horizon Health Network
Moncton, NB · Greater Moncton Metropolitan Area
- Full-time
…encouraged to apply as an equivalent combination of education, training and experience may be…
Added 27 mins ago
PH
Speech Language Pathologist
Provincial Health Services Authority
Vancouver, BC
- Temporary
…practice and treatment team in partnership with the Program Manager and/or Professional Practice…
Added 27 mins ago
PH
Direct Care Nurse, Minimum and Medium Security Units FPS
Provincial Health Services Authority
Port Coquitlam, BC
- Part-time
Identifies own learning needs, reviews these with the Clinical Nurse Leader or Clinical Services Manager, and engages in a variety of activities to meet these needs.
Added 27 mins ago
PH
Psychologist
Provincial Health Services Authority
Vancouver, BC
- Temporary
…Psychology or designate and in collaboration with the Clinic/Program Manager/Director (if…

PreciKam

INJECTION MOULDING TECHNICIAN

Montreal, QC, Canada

Full-time

Apply About employer

Applications open in a new tab.

Job details

Job type: Full-time
Apply by: Nov 6, 2026
Experience: 3 to 5 years’ experience in a similar position or have equivalent training.
Posting language: English
Posted: Oct 8, 2026

Original job description

Summary Of Function

The level II injection moulding technician prints the work orders for each machine according to the IQMS daily schedule, ensures the transfer of information between the Tools Room, Material Preparation and Production departments, and ensures the proper operation of the machines and auxiliary equipment.

Ensures compliance with quality standards and identifies mould defects by discussing them with superiors.

Performs tasks related to maintaining a clean, safe working environment and ensures that resin requirements for machines are monitored and maintained.

Installs and uninstalls moulds correctly and connects peripherals.

Performs tests for repaired moulds.

Fills out daily production reports and arranges for layout in the IQMS.

Maintains cycle times; adjusts times and explains deviations, if necessary.

Major Duties And Responsibilities

Maintain a safe and clean working environment by following established company policies and procedures.
Hanging and removing moulds on plastic injection moulding machines.
Connect the cooling circuits according to the cooling chart.
Connect the mould heating units if required.
Connect the switch limits for mould safety if required.
Connect hydraulic or pneumatic cores if required.
Enter the injection parameters for each mould installed.
Fill out the forms and forms for each mould installed or removed.
Carefully follow the instructions of the level III injection moulding technician, assist if necessary.
Report any safety, operational or quality problems to the level III injection moulding technician or person in charge.
Ensure that all machinery and equipment in production under your direct control is operating properly to minimize damage and downtime.
Participate in all training sessions and meetings as required.
Participate in the corrective action process in the event of non-compliance.
Visually inspect the parts produced at the beginning of each shift.
Detect any contamination of the parts or any other obvious visual defect and correct the defect.
Check material dryers and hoppers for clean and properly filled material at the beginning of each shift.
Clean dryer and loader filters if the floor person is not available.
Make sure that workshop safety and cleanliness procedures are followed and maintained.
Assist and train new Level I and II technicians whenever necessary.
Adjusts secondary operations as required.
Assists as a material handler as required.
Ensures that assembly procedures are followed and that careful adjustments are made, if necessary.
Optimize machine cycle time and mould changeover time.
Check "pre-production parts" before submitting them to the quality department.
Ensure that safety rules are respected and maintained in the factory.
Be aware of, understand and adhere to the company's core values of accuracy, respect, importance and credibility.
Know and respect the company's quality policies and objectives.
Promote a safe and clean work environment by following the company's established policies and procedures.
Ensure that all parts produced meet or exceed customer and company quality standards.
Layered Process Auditing (LPA).
Required to occasionally work an alternate shift to achieve business requirements.
Perform additional tasks as determined by the supervisor.

Educational Requirements

High school, technical vocational training that is appropriate for the position.

Or equivalent experience as judged by the hiring manager to their satisfaction.

Experience Requirements

3 to 5 years’ experience in a similar position or have equivalent training.

Basic knowledge of plastic raw material and proper handling and drying procedures. Understand the technical data sheets of the raw materials in relation to the technical data sheets of the moulds. Be able to operate all machines in the moulding department. Be able to understand and apply the inspection procedures as defined in the inspection plans.

Other Requirements

Must be able to be registered with Canada’s Controlled Goods Program. This involves a criminal background check conducted by an authorized third party.

At any point during the recruitment or employment process, candidates or employees may be asked to complete a personality or psychometric test relevant to the role.

Why Join Us

Working for an industry leader in the manufacture of precision plastic injected parts that are important to people’s health and safety.

PreciKam Is Proud Of Our Diverse Team. We Come From Every Continent, Speak Over 18 Languages Represent Many Races, Genders, Identities, And Beliefs (or Not). However, We All Share Some Common Traits

We respect each other and the skills and talents we each have.

We are good at our jobs and are proud that we make products that have an impact of people’s health and safety.

We value education and experience regardless of what country you earned it in.

We are all strong individuals who understand the power and value of a team.

We do what we say we are going to do.

Enjoy a warm and inviting culture in a clean and bright workplace.

What We Offer

Competitive pay and benefits including extended healthcare, dental care, disability insurance life insurance, employee assistance program, online doctor.

RRSP program.

Fitness subscription Subsidy.

Training offered in 3 languages, French, English, Hindi.

Paid time off.

Company events.

The best fair-Trade coffee, Cappuccinos, etc. Free to every team member.

Our West Island location is easily accessible by car. We have free on-site parking.

Career opportunities: nine of our last ten promotions (including two members of our executive team) have been internal.

Apply About employer

More about this job

Responsibilities

Install and remove moulds, set up and operate injection moulding machines and auxiliary equipment, monitor materials, and optimize cycle and changeover times. Inspect production parts, maintain quality and safety standards, complete production records, and report operational or quality issues.

Requirements

Requires high school education and appropriate technical vocational training, or equivalent experience, plus 3 to 5 years in a similar role or equivalent training. Candidates should understand plastic raw materials and drying procedures, operate moulding department machines, interpret material and mould technical data sheets, and apply inspection procedures.

Skills

Injection Moulding
Mould Installation and Removal
Machine Operation
Injection Parameter Setup
Mould Changeovers
Cycle Time Optimization
Quality Inspection
Defect Detection
Raw Material Handling
Material Drying
Equipment Maintenance
Production Reporting
IQMS
Safety Compliance
Corrective Action
Training and Mentoring

Benefits

Extended Healthcare
Dental Care
Disability Insurance
Life Insurance
Employee Assistance Program
Online Doctor
RRSP Program
Fitness Subscription Subsidy
Training
Paid Time Off
Company Events
Free Coffee

Visa sponsorship

Not detected in the job text

Keywords

Injection Moulding
Plastic Injection Moulding Machines
IQMS
Mould Installation
Mould Removal
Cooling Circuits
Mould Heating Units
Switch Limits
Hydraulic Cores
Pneumatic Cores
Injection Parameters
Plastic Raw Materials
Material Dryers
Hoppers
Technical Data Sheets
Inspection Plans
Quality Standards
Visual Inspection
Cycle Time
Mould Changeover
Auxiliary Equipment
Production Reporting
Corrective Action
Layered Process Auditing
Controlled Goods Program

Report this job