Industrial engineering and manufacturing technicians jobs in Canada

Group jobs by employerEmail me new jobs Save this search

Added 18 days ago
ML
Medical Device Manufacturing Technician
Mespere LifeSciences Inc.
Waterloo, ON
- Part-time
…Ontario. We have developed a number of innovative technologies and products for non-invasive and continuous cardiac and cerebral hemodynamic monitoring. Our mission is to advance patient…
Added 19 days ago
P
Electronics Manufacturing Technician
PayCruit
Concord, ON
- Contract
· Monitor any failures during test and report them to Manufacturing Line Lead or Technician
Added 19 days ago
BE
Mechanical Engineer / EIT / Engineering Technologist / Manufacturing Technician
Boundary Equipment Co. Ltd.
Port Coquitlam, BC
- Full-time
Bridge Machine is seeking a Mechanical Engineer, Engineer-in-Training (EIT), Engineering Technologist, or Manufacturing Technician to support machining, hydraulic cylinder repair,…
Added 20 days ago
ML
Medical Device Manufacturing Technician
Mespere LifeSciences Inc.
Waterloo, ON
- Part-time
…Ontario. We have developed a number of innovative technologies and products for non-invasive and continuous cardiac and cerebral hemodynamic monitoring. Our mission is to advance patient…
Added 21 days ago
CI
Manufacturing Technician
Curaleaf International
Brampton, ON
- $50,000 CAD / year
- Full-time
Reporting to the Operations Manager, the Manufacturing Technician performs assigned daily duties for GMP post-harvest manufacturing operations. Focused on regulated, high-quality cannabis…
Added 21 days ago
P
INJECTION MOULDING TECHNICIAN
PreciKam
Montreal, QC
- Full-time
Assist and train new Level I and II technicians whenever necessary.
Added 23 days ago
LC
Engineer - Manufacturing Technician
Linamar Corporation
Guelph, ON
- Full-time
As a Manufacturing Technician, you will play a critical role in the production process, ensuring that manufacturing operations run smoothly and efficiently. You will collaborate with…
Added 23 days ago
Manufacturing Technician - Assembly (Midnights)
INNIO
Welland, ON
The Manufacturing Technician will be a key team member responsible for the assembly manufacturing process. They will interpret and produce work from complex product drawings, manuals,…
Added 24 days ago
SS
industrial engineering technician
Signalisation SAIC inc.
Longueuil, QC
- Full-time
Collect and compile operational or experimental data
Added 25 days ago
SO
Technicien.ne génie industriel - procédés utilités/Industrial engineering technician - Process and utilities
Salas O'Brien
Montreal, QC
- Full-time
Added 26 days ago
GT
Manufacturing Technician
GeoSpectrum Technologies, Inc
Peterborough, ON
- Full-time
Reporting to the Manager of Handling Systems Engineering, the Manufacturing Technician plays a key role in the build and test of complex electro-mechanical systems using detailed assembly…
Added 27 days ago
Manufacturing Technician - Warehouse
INNIO
Welland, ON
The Manufacturing Technician will be a key team member responsible for ensuring smooth material movement and delivery for the manufacturing process. They will ensure the timely, safe and…
Added 27 days ago
Technicien de production - Remplissage - Manufacturing Technician - Filling
GRIFOLS, S.A.
Montreal, QC
…company that since 1909 has been working to improve the health and well-being of people around the world. We are leaders in plasma-derived medicines and transfusion medicine and develop,…
Added 27 days ago
Technicien de production Albumin Purification Manufacturing Technician
GRIFOLS, S.A.
Montreal, QC
Technicien de production - Purification Albumine - Quart de soir (14h30-23h00)
Added 27 days ago
Technicien de production Albumin Purification Manufacturing Technician
GRIFOLS, S.A.
Montreal, QC
Technicien de production - Purification Albumine - Quart de nuit (22h30-7h00)
Added 28 days ago
BI
Injection Moulding Technician, Afternoons
Boshart Industries Inc.
Milverton, ON
- $28 to $34.61 CAD / hour
- Full-time
Boshart Industries is based in Milverton, Ontario, with more than 70 years of experience in the plumbing and water well industry, including distribution and manufacturing. We are committed…
Added 29 days ago
V
Manufacturing Technician I
Verathon
Burnaby, BC
- Full-time
…demonstrate skill, loyalty, initiative, innovation, enthusiasm and team spirit are what make the VMCA team the best in the industry! The Manufacturing Technologist works closely with the…
Added 1 month ago
SP
Plastics manufacturing technician
Silgan Plastics
Lachine, QC
- From $36 CAD / hour
- Full-time
- On-site
Night shift premium
Added 1 month ago
UC
Manufacturing technician
Upper Crust
North York, ON
- From $32.55 CAD / hour
- Full-time
- On-site
Develop manufacturing and processing procedures
Added 1 month ago
LE
Manufacturing technician
Les Emballages L. Boucher inc.
Québec, QC
- From $25.75 CAD / hour
- Full-time
- On-site
Collect and compile operational or experimental data
Added 1 month ago
CS
Industrial engineering technician
CMP Solutions mécaniques avancées
Châteauguay, QC
- From $75,000 CAD / year
- Full-time
- On-site
Develop and conduct production, inventory and quality assurance programs
Added 1 month ago
O
Industrial engineering technician
OmniLyte
Wawanesa, MB
- From $31.33 CAD / hour
- Full-time
- On-site
Develop manufacturing and processing procedures
Added 1 month ago
TP
Quality control technician (except chemical)
Tria Products LTD
Arborg, MB
- From $31.33 CAD / hour
- Full-time
- On-site
Green jobs contribute to environmental preservation, conservation, and restoration. Learn more about green jobs.
Added 1 month ago
IP
Injection moulding technician
Industries Plastipak inc.
Cookshire-Eaton, QC
- From $27.67 CAD / hour
- Full-time
- On-site
Added 1 month ago
MR
Manufacturing technician
MST Rebar Inc.
Woodbridge, ON
- $37 to $39 CAD / hour
- Full-time
- On-site
Develop manufacturing and processing procedures

PreciKam

INJECTION MOULDING TECHNICIAN

Montreal, QC, Canada

Full-time

Apply on LinkedIn About employer

Applications open in a new tab.

Job details

Job type: Full-time
Experience: 3 to 5 years’ experience in a similar position or have equivalent training.
Posting language: English
Posted: Oct 21, 2026

Original job description

Summary Of Function

The level II injection moulding technician prints the work orders for each machine according to the IQMS daily schedule, ensures the transfer of information between the Tools Room, Material Preparation and Production departments, and ensures the proper operation of the machines and auxiliary equipment.

Ensures compliance with quality standards and identifies mould defects by discussing them with superiors.

Performs tasks related to maintaining a clean, safe working environment and ensures that resin requirements for machines are monitored and maintained.

Installs and uninstalls moulds correctly and connects peripherals.

Performs tests for repaired moulds.

Fills out daily production reports and arranges for layout in the IQMS.

Maintains cycle times; adjusts times and explains deviations, if necessary.

Major Duties And Responsibilities

Maintain a safe and clean working environment by following established company policies and procedures.
Hanging and removing moulds on plastic injection moulding machines.
Connect the cooling circuits according to the cooling chart.
Connect the mould heating units if required.
Connect the switch limits for mould safety if required.
Connect hydraulic or pneumatic cores if required.
Enter the injection parameters for each mould installed.
Fill out the forms and forms for each mould installed or removed.
Carefully follow the instructions of the level III injection moulding technician, assist if necessary.
Report any safety, operational or quality problems to the level III injection moulding technician or person in charge.
Ensure that all machinery and equipment in production under your direct control is operating properly to minimize damage and downtime.
Participate in all training sessions and meetings as required.
Participate in the corrective action process in the event of non-compliance.
Visually inspect the parts produced at the beginning of each shift.
Detect any contamination of the parts or any other obvious visual defect and correct the defect.
Check material dryers and hoppers for clean and properly filled material at the beginning of each shift.
Clean dryer and loader filters if the floor person is not available.
Make sure that workshop safety and cleanliness procedures are followed and maintained.
Assist and train new Level I and II technicians whenever necessary.
Adjusts secondary operations as required.
Assists as a material handler as required.
Ensures that assembly procedures are followed and that careful adjustments are made, if necessary.
Optimize machine cycle time and mould changeover time.
Check "pre-production parts" before submitting them to the quality department.
Ensure that safety rules are respected and maintained in the factory.
Be aware of, understand and adhere to the company's core values of accuracy, respect, importance and credibility.
Know and respect the company's quality policies and objectives.
Promote a safe and clean work environment by following the company's established policies and procedures.
Ensure that all parts produced meet or exceed customer and company quality standards.
Layered Process Auditing (LPA).
Required to occasionally work an alternate shift to achieve business requirements.
Perform additional tasks as determined by the supervisor.

Educational Requirements

High school, technical vocational training that is appropriate for the position.

Or equivalent experience as judged by the hiring manager to their satisfaction.

Experience Requirements

3 to 5 years’ experience in a similar position or have equivalent training.

Basic knowledge of plastic raw material and proper handling and drying procedures. Understand the technical data sheets of the raw materials in relation to the technical data sheets of the moulds. Be able to operate all machines in the moulding department. Be able to understand and apply the inspection procedures as defined in the inspection plans.

Other Requirements

Must be able to be registered with Canada’s Controlled Goods Program. This involves a criminal background check conducted by an authorized third party.

At any point during the recruitment or employment process, candidates or employees may be asked to complete a personality or psychometric test relevant to the role.

Why Join Us

Working for an industry leader in the manufacture of precision plastic injected parts that are important to people’s health and safety.

PreciKam Is Proud Of Our Diverse Team. We Come From Every Continent, Speak Over 18 Languages Represent Many Races, Genders, Identities, And Beliefs (or Not). However, We All Share Some Common Traits

We respect each other and the skills and talents we each have.

We are good at our jobs and are proud that we make products that have an impact of people’s health and safety.

We value education and experience regardless of what country you earned it in.

We are all strong individuals who understand the power and value of a team.

We do what we say we are going to do.

Enjoy a warm and inviting culture in a clean and bright workplace.

What We Offer

Competitive pay and benefits including extended healthcare, dental care, disability insurance life insurance, employee assistance program, online doctor.

RRSP program.

Fitness subscription Subsidy.

Training offered in 3 languages, French, English, Hindi.

Paid time off.

Company events.

The best fair-Trade coffee, Cappuccinos, etc. Free to every team member.

Our West Island location is easily accessible by car. We have free on-site parking.

Career opportunities: nine of our last ten promotions (including two members of our executive team) have been internal.

Apply on LinkedIn About employer

More about this job

Responsibilities

Install and remove moulds, connect required peripherals, set machine parameters, and maintain injection moulding machines and auxiliary equipment. Inspect production parts, monitor materials and cycle times, complete production records, and follow quality, safety, and cleanliness procedures.

Requirements

Requires a high school education and appropriate technical vocational training, or equivalent experience, along with 3 to 5 years of relevant experience or equivalent training. Candidates should understand plastic raw materials and drying procedures, operate moulding department machines, and apply inspection plans; registration with Canada's Controlled Goods Program is also required.

Skills

Injection Moulding
Mould Installation And Removal
Machine Operation
Injection Parameter Setup
Mould Changeovers
Cycle Time Optimization
Quality Inspection
Defect Detection
Raw Material Handling
Material Drying
Equipment Maintenance
Cooling Circuit Connection
Hydraulic And Pneumatic Core Connection
Production Reporting
Safety Compliance
Training And Mentoring

Benefits

Extended Healthcare
Dental Care
Disability Insurance
Life Insurance
Employee Assistance Program
Online Doctor
Retirement Savings Plan
Fitness Subscription Subsidy
Paid Time Off
Company Events
Free Coffee

Visa sponsorship

Not detected in the job text

Keywords

Injection Moulding
Plastic Manufacturing
IQMS
Production Scheduling
Mould Installation
Mould Removal
Mould Changeover
Injection Parameters
Cooling Circuits
Mould Heating Units
Switch Limits
Hydraulic Cores
Pneumatic Cores
Auxiliary Equipment
Plastic Raw Materials
Material Dryers
Hoppers
Cycle Time Optimization
Quality Standards
Inspection Plans
Visual Inspection
Corrective Action
Layered Process Auditing
Production Reporting
Controlled Goods Program
Workplace Safety

Report this job

Hiring at a glance

Advertised starting pay

Where work happens

Industrial engineering and manufacturing technicians jobs in Canada

Medical Device Manufacturing Technician

Electronics Manufacturing Technician

Mechanical Engineer / EIT / Engineering Technologist / Manufacturing Technician

Medical Device Manufacturing Technician

Manufacturing Technician