Find work in Canada.

443,694 jobs across our Canadian network. How we count

Jobs in Canada

25+ jobs

Email me new jobs Save this search

Added 1 hour ago
Quality Control Co-Op Student
Amrize
Winnipeg, MB
The Quality Control Technician (Level I) role is to perform the basic physical testing of plastic and hardened concrete and aggregates. He/She shall have general understanding of concrete…
Added 1 hour ago
Electrical Technician I
City of Vancouver
Vancouver, BC
The Electrical Technician I will perform detailed technical work including designing, estimating, inspecting, providing technical reviews, ordering materials, developing project scope and…
Added 3 hours ago
TS
Class 1 - Mail Company Driver - PM Shift - Sign-On BONUS
The Seaboard Transport Group
St. John's, NL
- Full-time
Division, Driver & Technician of the Month Programs
Added 4 hours ago
VA
Veterinary Technician , RVT, Westside Animal Hospital
VCA Animal Hospitals
Toronto, ON
- Full-time
Westside Animal Hospital welcomes a Registered Veterinary Technician (RVT) to join our team in Toronto, Ontario. This is an exciting opportunity for a Veterinary Technician to work…
Added 4 hours ago
B
Crew Lead
BGIS
Winnipeg, MB
- Full-time
Added 4 hours ago
B
Facility Services Manager
BGIS
ON · Ontario, Canada
- Full-time
Generate and dispatch service request work orders to vendors as per established process.
Added 4 hours ago
P
INJECTION MOULDING TECHNICIAN
PreciKam
Montreal, QC
- Full-time
The level II injection moulding technician prints the work orders for each machine according to the IQMS daily schedule, ensures the transfer of information between the Tools Room, Material…
Added 4 hours ago
UO
Research Ethics Advisor
University of Waterloo
Waterloo, ON
- Full-time
…for facilitating the research ethics submission and review process and overseeing the effectiveness and efficiency of the online ethics review system. The REA ensures that the daily…
Added 5 hours ago
HT
Assembly Technician (Contract)
Husky Technologies
Bolton, ON
- Full-time
Conduct in‑process inspections of assembled systems, including air, water, oil, and hydraulic circuits, and /or Electrical circuits to verify correct routing, terminations, connections, and…
Added 5 hours ago
Leak Repair Technician III
Red Flame Industries Inc
Acheson, AB
Red Flame Industries is looking for Senior Leak Repair Technician (Leak Repair Technician III) to repair various process leaks on live operating systems under pressure.
Added 5 hours ago
Quality Assurance Technician (Canada)
Cronos Group Inc.
Stayner, ON
As the QA Technician, you will work within the Quality Assurance department to support product release in Canada and International markets. The QA Technician will complete tasks related to…
Added 5 hours ago
HT
Maintenance Technician
Husky Technologies
Bolton, ON
- Full-time
We are seeking a highly skilled CNC Maintenance Technician with expertise in diagnosing,troubleshooting, and maintaining complex CNC machinery. The ideal candidate will havein-depth…
Added 6 hours ago
B-
Underground Heavy Equipment Technician
B2Gold - Nunavut
NU · Nunavut, Canada
- Full-time
Underground Heavy Equipment Technician, Nunavut
Added 6 hours ago
TT
Technician Lead
Trane Technologies
Laval, QC
- Full-time
Trane in Laval is seeking a Technician Supervisor to join our team. In this role, you will be responsible for supervising field-based HVAC (heating, ventilation and air conditioning)…
Added 6 hours ago
C
Technicien d’entretien principal / Maintenance Sr. Technician
CBRE
Quebec, QC · Greater Quebec City Metropolitan Area
- Full-time
Step into a vital role as a CBRE Maintenance Sr. Technician, where you'll proactively manage and uphold the peak performance of expansive buildings, complex industrial systems, and…
Added 6 hours ago
C
Technicien d’entretien principal / Maintenance Sr. Technician
CBRE
Quebec, QC · Greater Quebec City Metropolitan Area
- Full-time
Step into a vital role as a CBRE Maintenance Sr. Technician, where you'll proactively manage and uphold the peak performance of expansive buildings, complex industrial systems, and…
Added 6 hours ago
EG
Fuel and Lube Technician
Equinox Gold Corp.
Geraldton, ON
- Full-time
We are seeking a Fuel & Lube Technician to join our team. Reporting to the Mine Maintenance Supervisor, the Fuel & Lube Technician is responsible for safely and productively operating an…
Added 6 hours ago
PA
Automotive Service Technician (Mississauga Toyota)
Performance Auto Group
Mississauga, ON
- Full-time
Mississauga Toyota is looking for a 310S Licensed Automotive Service Technician to join their high-volume shop and is offering a Competitive Compensation Package including a flat hourly…
Added 6 hours ago
AI
Detailer - Crosstown Chrysler Dodge Jeep Ram
AutoCanada Inc.
Edmonton, AB
- $20 to $28 CAD / hour
- Full-time
Notify supervisor or appropriate technician when you notice parts of car that require repair or replacement
Added 6 hours ago
NE
Module Process Engineer
NextStar Energy
Windsor, ON
- $75,000 to $90,000 CAD / year
- Full-time
We are currently seeking a motivated and detail-oriented Module Process Engineer to join our team.
Added 6 hours ago
SS
Helpdesk Support Technician
Smart Start Canada ULC
Sherwood Park, AB
- Up to $19 CAD / hour
- Full-time
Schedule: Shift schedules will be discussed during the interview process.
Added 6 hours ago
BA
AUTOMOTIVE TECHNICIAN - FLAT RATE
Bannister Automotive Group
Penticton 1, BC
- $38.4 to $40 CAD / hour
- Full-time
Drive Your Career Forward with Bannister - We’re Hiring an Automotive Technician!
Added 6 hours ago
B
Facility Services Manager
BGIS
ON · ON, Canada
- Full-time
Generate and dispatch service request work orders to vendors as per established process.
Added 6 hours ago
ME
Chef d'équipe d'atelier / Shop Lead Hand
MACLEAN ENGINEERING & MARKETING CO. LIMITED
Val d'Or, QC
- Full-time
Added 7 hours ago
CH
Maintenance Technician - The Queen's Cue & Boars Head Pub
Crescent Hotels & Resorts
Stratford, ON
- Full-time
We are seeking a full-time Maintenance Technician to join the opening team behind one of Stratford’s most anticipated new hospitality destinations. As The Queen’s Cue prepares to welcome…

PreciKam

INJECTION MOULDING TECHNICIAN

Montreal, QC, Canada

Full-time

Apply About employer

Applications open in a new tab.

Job details

Job type: Full-time
Apply by: Nov 6, 2026
Experience: 3 to 5 years’ experience in a similar position or have equivalent training.
Posting language: English
Posted: Oct 21, 2026

Original job description

Summary Of Function

The level II injection moulding technician prints the work orders for each machine according to the IQMS daily schedule, ensures the transfer of information between the Tools Room, Material Preparation and Production departments, and ensures the proper operation of the machines and auxiliary equipment.

Ensures compliance with quality standards and identifies mould defects by discussing them with superiors.

Performs tasks related to maintaining a clean, safe working environment and ensures that resin requirements for machines are monitored and maintained.

Installs and uninstalls moulds correctly and connects peripherals.

Performs tests for repaired moulds.

Fills out daily production reports and arranges for layout in the IQMS.

Maintains cycle times; adjusts times and explains deviations, if necessary.

Major Duties And Responsibilities

Maintain a safe and clean working environment by following established company policies and procedures.
Hanging and removing moulds on plastic injection moulding machines.
Connect the cooling circuits according to the cooling chart.
Connect the mould heating units if required.
Connect the switch limits for mould safety if required.
Connect hydraulic or pneumatic cores if required.
Enter the injection parameters for each mould installed.
Fill out the forms and forms for each mould installed or removed.
Carefully follow the instructions of the level III injection moulding technician, assist if necessary.
Report any safety, operational or quality problems to the level III injection moulding technician or person in charge.
Ensure that all machinery and equipment in production under your direct control is operating properly to minimize damage and downtime.
Participate in all training sessions and meetings as required.
Participate in the corrective action process in the event of non-compliance.
Visually inspect the parts produced at the beginning of each shift.
Detect any contamination of the parts or any other obvious visual defect and correct the defect.
Check material dryers and hoppers for clean and properly filled material at the beginning of each shift.
Clean dryer and loader filters if the floor person is not available.
Make sure that workshop safety and cleanliness procedures are followed and maintained.
Assist and train new Level I and II technicians whenever necessary.
Adjusts secondary operations as required.
Assists as a material handler as required.
Ensures that assembly procedures are followed and that careful adjustments are made, if necessary.
Optimize machine cycle time and mould changeover time.
Check "pre-production parts" before submitting them to the quality department.
Ensure that safety rules are respected and maintained in the factory.
Be aware of, understand and adhere to the company's core values of accuracy, respect, importance and credibility.
Know and respect the company's quality policies and objectives.
Promote a safe and clean work environment by following the company's established policies and procedures.
Ensure that all parts produced meet or exceed customer and company quality standards.
Layered Process Auditing (LPA).
Required to occasionally work an alternate shift to achieve business requirements.
Perform additional tasks as determined by the supervisor.

Educational Requirements

High school, technical vocational training that is appropriate for the position.

Or equivalent experience as judged by the hiring manager to their satisfaction.

Experience Requirements

3 to 5 years’ experience in a similar position or have equivalent training.

Basic knowledge of plastic raw material and proper handling and drying procedures. Understand the technical data sheets of the raw materials in relation to the technical data sheets of the moulds. Be able to operate all machines in the moulding department. Be able to understand and apply the inspection procedures as defined in the inspection plans.

Other Requirements

Must be able to be registered with Canada’s Controlled Goods Program. This involves a criminal background check conducted by an authorized third party.

At any point during the recruitment or employment process, candidates or employees may be asked to complete a personality or psychometric test relevant to the role.

Why Join Us

Working for an industry leader in the manufacture of precision plastic injected parts that are important to people’s health and safety.

PreciKam Is Proud Of Our Diverse Team. We Come From Every Continent, Speak Over 18 Languages Represent Many Races, Genders, Identities, And Beliefs (or Not). However, We All Share Some Common Traits

We respect each other and the skills and talents we each have.

We are good at our jobs and are proud that we make products that have an impact of people’s health and safety.

We value education and experience regardless of what country you earned it in.

We are all strong individuals who understand the power and value of a team.

We do what we say we are going to do.

Enjoy a warm and inviting culture in a clean and bright workplace.

What We Offer

Competitive pay and benefits including extended healthcare, dental care, disability insurance life insurance, employee assistance program, online doctor.

RRSP program.

Fitness subscription Subsidy.

Training offered in 3 languages, French, English, Hindi.

Paid time off.

Company events.

The best fair-Trade coffee, Cappuccinos, etc. Free to every team member.

Our West Island location is easily accessible by car. We have free on-site parking.

Career opportunities: nine of our last ten promotions (including two members of our executive team) have been internal.

Apply About employer

More about this job

Responsibilities

Install and remove moulds, connect required peripherals, set machine parameters, and maintain injection moulding machines and auxiliary equipment. Inspect production parts, monitor materials and cycle times, complete production records, and follow quality, safety, and cleanliness procedures.

Requirements

Requires a high school education and appropriate technical vocational training, or equivalent experience, along with 3 to 5 years of relevant experience or equivalent training. Candidates should understand plastic raw materials and drying procedures, operate moulding department machines, and apply inspection plans; registration with Canada's Controlled Goods Program is also required.

Skills

Injection Moulding
Mould Installation And Removal
Machine Operation
Injection Parameter Setup
Mould Changeovers
Cycle Time Optimization
Quality Inspection
Defect Detection
Raw Material Handling
Material Drying
Equipment Maintenance
Cooling Circuit Connection
Hydraulic And Pneumatic Core Connection
Production Reporting
Safety Compliance
Training And Mentoring

Benefits

Extended Healthcare
Dental Care
Disability Insurance
Life Insurance
Employee Assistance Program
Online Doctor
Retirement Savings Plan
Fitness Subscription Subsidy
Paid Time Off
Company Events
Free Coffee

Visa sponsorship

Not detected in the job text

Keywords

Injection Moulding
Plastic Manufacturing
IQMS
Production Scheduling
Mould Installation
Mould Removal
Mould Changeover
Injection Parameters
Cooling Circuits
Mould Heating Units
Switch Limits
Hydraulic Cores
Pneumatic Cores
Auxiliary Equipment
Plastic Raw Materials
Material Dryers
Hoppers
Cycle Time Optimization
Quality Standards
Inspection Plans
Visual Inspection
Corrective Action
Layered Process Auditing
Production Reporting
Controlled Goods Program
Workplace Safety

Report this job