Find work in Canada.

359,459 jobs across our Canadian network. How we count

Jobs in Canada

25+ jobs

Email me new jobs Save this search

Added 5 hours ago
AE
Jr Project Engineer/EIT
Acero Engineering
Calgary, AB
- $30 to $40 CAD / hour
- Full-time
…enthusiastic individual to fill a permanent role as a Junior Project…
Added 5 hours ago
EV
Engineer or Engineer in Training, Mechanical
Elk Valley Resources
Elkford, BC
- $91,300 to $126,800 CAD / year
Reporting to Senior Engineer, Maintenance, the Engineer / EIT, Mechanical is responsible
Added 5 hours ago
EI
Electrical Engineer - Traffic Signal
Egis in Canada
Toronto, ON
- $120,000 to $150,000 CAD / year
- Full-time
Electrical Engineer – Traffic Signal Design is a technical leadership role supporting multidisciplinary transportation infrastructure projects in Toronto, Ontario, Canada. The position is…
Added 5 hours ago
EI
Electrical Traffic Signal Designer
Egis in Canada
Toronto, ON
- $80,000 to $120,000 CAD / year
- Full-time
The position participates across project delivery phases including detailed design, field investigation, design review, quality assurance, construction support, stakeholder coordination,…
Added 5 hours ago
CE
Mechanical HVAC/Cooling Engineer (Data Center Design)
Colm Engineering Ltd
Vaughan, ON
- Full-time
We are seeking a highly skilled and experienced Mechanical HVAC/Cooling Engineer to join our team. This individual will be responsible for designing and implementing HVAC systems and fire…
Added 5 hours ago
AC
Senior Product Development Engineer – Liquid Cooling
Amphenol Communications Solutions
Markham, ON
- Full-time
…is one of the world’s largest designers and manufacturers of electrical, electronic and fiber optic connectors and interconnect systems, antennas, sensors and sensor-based products and…
Added 5 hours ago
AC
Product Development Engineer – Liquid Cooling
Amphenol Communications Solutions
Markham, ON
- Full-time
…is one of the world’s largest designers and manufacturers of electrical, electronic and fiber optic connectors and interconnect systems, antennas, sensors and sensor-based products and…
Added 5 hours ago
EV
Engineer or Engineer in Training, Mechanical
Elk Valley Resources
Elkford, BC
- $91,300 to $126,800 CAD / year
- Full-time
Reporting to Senior Engineer, Maintenance, the Engineer / EIT, Mechanical is responsible
Added 5 hours ago
E
Manager, Circulations and Standards
ENMAX
Calgary, AB · ENMAX Place, Calgary, AB
- Full-time
Partner with Field Services, Asset Management, Project Delivery, Operations, Supply Chain, Office of the Chief Engineer, and external stakeholders to influence decisions, align priorities,…
Added 5 hours ago
IL
Senior Embedded Systems Electronics engineer
Innovobot Labs
Montreal, QC · Greater Montreal Metropolitan Area
- Full-time
We are looking for a senior embedded and electrical engineer to join our dynamic team. Reporting to the Director of Systems Engineering, you will be responsible for designing, implementing…
Added 6 hours ago
Engineer, Process Development (New Process Introduction - NPI)
Redlen Technologies Inc.
Saanichton, BC
Master’s or PhD degree in mechanical engineering, nanotechnology, material science, electrical engineering, physics, applied physics, chemical engineering, chemistry, or other scientific…
Added 6 hours ago
B
Aircraft Mechanic AME M2 (C-17)
Boeing
Winnipeg, MB · Toronto, ON · Ottawa, ON · Mississauga, ON · Vancouver, BC · Richmond, BC · Trenton, NS · Calgary, AB · CAN - CFB Trenton, Canada
- Full-time
Boeing Canada Operations Ltd. Global Technical Operations, Field Operations is looking for a highly skilled and experienced Aircraft Mechanic (C-17), working out of the CFB Trenton, ON to…
Added 6 hours ago
YE
Electrical Engineer: Scada and Communications
Yukon Energy Corporation
Whitehorse, YT
- Full-time
The Opportunity: Electrical Engineer-SCADA and Communications
Added 7 hours ago
Q
Firmware Engineer, Edge AI Silicon Validation (Embedded C)
Qualcomm
Markham, ON
- Full-time
An ideal candidate is an embedded Firmware Engineer interested in helping to validate and develop world-class low power audio and AI solutions. Replacement Position
Added 7 hours ago
DP
Reliability Maintenance Engineer
Domtar Products
Port Mellon, BC
- $95,000 to $115,000 CAD / year
The Reliability Maintenance Engineer owns the predictive maintenance program, leads root cause failure analysis, develops condition monitoring strategies for critical assets, and provides…
Added 7 hours ago
H
Guidance, Navigation & Control (GNC) Systems Engineer | Remote Opportunity | Fastwater Staffing
HIKINEX
Remote, Canada
- Full-time
- Remote
Must have a B.Sc. in Electrical Engineering, Aerospace Engineering, Physics, or a related field.
Added 7 hours ago
EG
Electrical Traffic Signal Designer
Egis Group
Toronto, ON
- $80,000 to $120,000 CAD / year
- Full-time
The position participates across project delivery phases including detailed design, field investigation, design review, quality assurance, construction support, stakeholder coordination,…
Added 7 hours ago
EG
Electrical Engineer - Traffic Signal
Egis Group
Toronto, ON
- $120,000 to $150,000 CAD / year
- Full-time
Electrical Engineer – Traffic Signal Design is a technical leadership role supporting multidisciplinary transportation infrastructure projects in Toronto, Ontario, Canada. The position is…
Added 8 hours ago
FM
Embedded & Automations Engineer
Flosonics Medical
Toronto, ON
- Full-time
Bachelor’s degree in electrical engineering, mechatronics engineering, systems engineering or a related field.
Added 8 hours ago
GC
HIL Commissioning Engineer
Global Connect Technologies
Windsor, ON
- Full-time
Bachelor's degree in Electrical, Electronics, Mechatronics, Computer Engineering, or a related field.
Added 8 hours ago
GC
HIL Engineer
Global Connect Technologies
Windsor, ON
- Full-time
Bachelor’s degree in Electrical, Mechanical, Computer, or a related engineering field.
Added 8 hours ago
HT
Designer, Development (Service)
Husky Technologies
Bolton, ON
- Full-time
The service team is currently seeking a Mechanical engineer/designer to specialize in resolving service issues.
Added 8 hours ago
GC
HIL Commissiong Engineer
Global Connect Technologies
Windsor, ON
- Full-time
Bachelor's or Master's degree in Electrical, Mechanical, Automotive, Controls, or related Engineering field.
Added 8 hours ago
GC
HIL Commissioning Engineer
Global Connect Technologies
Ottawa, ON
- Full-time
Bachelor’s degree in Electrical, Mechanical, Computer, or a related engineering field.
Added 8 hours ago
AC
Senior Product Development Engineer – Liquid Cooling
Amphenol Communications Solutions
Markham, ON
- Full-time
…is one of the world’s largest designers and manufacturers of electrical, electronic and fiber optic connectors and interconnect systems, antennas, sensors and sensor-based products and…

RCM Technologies, Inc.

Protection and Control Designer (Mid-Level)

Mississauga, ON, Canada

Full-time

Apply About employer

Applications open in a new tab.

Job details

Job type: Full-time
Apply by: Nov 8, 2026
Experience: 3–7 years of experience in protection and control design for high voltage substations (utility, transmission, distribution, or industrial).
Posting language: English
Posted: Oct 9, 2026

Original job description

Posting # 2026-PC-02EII

Position: Protection and Control Designer (Mid- Level)

Position Type: Full-time

Position Location: Mississauga, Ontario

Job Description And Summary

RCMT Energy Services is seeking an experienced Protection and Control Designer with a strong background in high voltage substations to join its team in Mississauga, ON, Canada.

The successful candidate will prepare protection and control design packages for high voltage substation projects, working independently with minimal guidance under the direction of the Lead Engineer.

Projects may include travel to client sites as needed to perform job functions at existing facilities, such as, but not limited to, field verification and collecting the data needed to prepare the design.

Responsibilities

Prepare protection and control design deliverables for high voltage substations, including single-line and three-line diagrams, AC/DC schematics, wiring and interconnection diagrams, and protection and control logic diagrams.
Develop relay and control panel layouts, front and rear panel elevations, panel wiring diagrams, and cable and conduit schedules.
Prepare bills of material and assist with the selection of protection relays, IEDs, RTUs, meters, and auxiliary devices (GE UR, SEL, ABB, Siemens, etc.).
Support engineers with relay setting and configuration files, protection coordination, and design calculations (e.g., battery and charger sizing, DC load, and AC station service).
Prepare SCADA, communications, and network design documentation, including points lists, RTU/gateway I/O, communication architecture, and fibre/network diagrams.
Perform field verification at existing facilities, mark up drawings, and incorporate construction and commissioning red-lines into as-built drawings.
Coordinate with engineers, designers, drafters, and project stakeholders to ensure deliverables meet project scope, schedule, client standards, and applicable codes.
Perform self-checks and peer checks of design packages to ensure quality and consistency.
Support construction and commissioning activities, including responding to RFIs and field design changes as required.

Requirements

Diploma in Electrical Engineering Technology or a bachelor’s degree in Electrical Engineering, or an equivalent combination of education and experience.
A P.Eng. license is not required. C.E.T. certification (OACETT) or EIT status is considered an asset.
3–7 years of experience in protection and control design for high voltage substations (utility, transmission, distribution, or industrial).
Solid working knowledge of high voltage substation protection and control systems, including line, transformer, bus, breaker failure, and feeder protection schemes, instrument transformers (CTs/VTs), AC/DC systems, and interlocking and control schemes.
Ability to read and interpret protection and control schematics, relay logic, and vendor drawings.
Familiarity with IEC 61850, DNP3, Modbus, SCADA, and RTU communications.
Proficient in AutoCAD and/or MicroStation and related products; experience with AutoCAD Electrical is an asset.
Familiarity with applicable codes and standards (CSA, IEEE, IEC, Ontario Electrical Safety Code) and utility design standards is an asset.
Proficient with Microsoft Office.
Demonstrated ability to handle multiple tasks simultaneously and apply sound judgment, initiative, and decision making.
Strong verbal and written communication skills.
Strong interpersonal skills to interact with clients, equipment vendors, and construction contractors.
Ability to be flexible and work with competing priorities.
Willingness to travel to client sites as required.
Must be a Canadian citizen or permanent resident, or hold a valid work permit for work in Canada.

RCMT Energy Services

RCMT's Energy Services Division is a comprehensive Engineering/Architectural design and construction management firm providing clients with total solutions for their project needs. RCMT provides the highest quality services in all engineering disciplines to utility, industrial, commercial, and institutional customers.

https://www.rcmt.com/energyservices/

At RCMT, we believe the key to success is working with our clients to define the correct technical staff and resources necessary to assure each project phase can be executed within the client's guidelines. This requires technical personnel with a depth of experience in all phases of project execution.

Experienced, multi-discipline project teams offer the full range of comprehensive services necessary to successfully execute all aspects of power delivery, generation, commercial and industrial projects.
Proven project management skills and tools are applied to all tasks to achieve budget and schedule commitments.
Highly responsive, flexible, and cost-effective total solutions consistently delivering results that exceed our customers' expectations.

Competitive Salary offered, along with benefits such as Health, Dental and Vision Plans, a well-being program and more. Salary and Title are commensurate with experience.

RCM Technologies Canada Corp. adheres to all applicable legislation, including the Occupational Health and Safety Act, and the Ontario Human Rights Code. RCM Technologies Canada Corp. is committed to workplace diversity and provides accommodations to applicants with disabilities throughout our hiring process in accordance with the Accessibility for Ontarians with Disabilities Act (AODA).

RCM is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Disclaimer

This job description is intended to describe the general nature and the level of the work being performed by the people assigned to this position. It is not intended to include every job duty and responsibility specific to the position. RCM reserves the right to amend and change responsibilities to meet business and organizational needs as necessary.

Apply About employer

More about this job

Responsibilities

Prepare protection and control design packages for high-voltage substations, including diagrams, schematics, panel layouts, relay and communications documentation, bills of material, and design calculations. Verify existing site conditions, update as-built drawings, coordinate with project stakeholders, check design quality, and support construction and commissioning activities.

Requirements

Requires a diploma in Electrical Engineering Technology, a bachelor’s degree in Electrical Engineering, or equivalent education and experience, plus 3–7 years of high-voltage substation protection and control design experience. Candidates should understand substation protection systems and communications protocols, be proficient with AutoCAD and/or MicroStation, communicate effectively, and be eligible to work in Canada; C.E.T. certification or EIT status is an asset.

Skills

High-Voltage Substation Protection and Control Design
Protection and Control Schematics
Relay Logic
AutoCAD
MicroStation
AutoCAD Electrical
IEC 61850
DNP3
Modbus
SCADA and RTU Communications
Relay Configuration
Protection Coordination
Design Calculations
Field Verification
Technical Drawing Review
Project Coordination

Benefits

Health Plan
Dental Plan
Vision Plan
Well-Being Program

Visa sponsorship

Not detected in the job text

Keywords

High-Voltage Substations
Protection and Control Design
Single-Line Diagrams
Three-Line Diagrams
AC/DC Schematics
Wiring and Interconnection Diagrams
Protection Relays
IEDs
RTUs
Meters
Relay Panels
SCADA
IEC 61850
DNP3
Modbus
AutoCAD
MicroStation
AutoCAD Electrical
OACETT
C.E.T.
EIT
CSA Standards
IEEE Standards
IEC Standards
Ontario Electrical Safety Code
Field Verification
Protection Coordination
Battery and Charger Sizing
Construction and Commissioning
As-Built Drawings

Report this job