Find work in Canada.

350,351 jobs across our Canadian network. How we count

Jobs in Canada

25+ jobs

Email me new jobs Save this search

Added 1 hour ago
MC
Principal Embedded Software Firmware Engineer (35837)
Myticas Consulting
Ottawa, ON
- Contract
Principal Embedded Software/Firmware Engineer
Added 1 hour ago
MC
Data Analyst – Power BI Microsoft Fabric (35903)
Myticas Consulting
Ottawa, ON
- Full-time
Microsoft certifications such as Fabric Analytics Engineer Associate or Power BI Data Analyst Associate.
Added 1 hour ago
II
Mechanical engineer
illumiSonics Inc
Waterloo, ON
- $85,000 to $95,000 CAD / year
- Full-time
- On-site
Conduct research into the feasibility, design, operation and performance of mechanisms, components and systems
Added 2 hours ago
CI
Mechanical engineer
ConeTec Investigations
Burnaby, BC
- $85,000 to $90,000 CAD / year
- Full-time
- On-site
Conduct research into the feasibility, design, operation and performance of mechanisms, components and systems
Added 3 hours ago
TR
Senior Electrical Engineer
The Redpath Group
North Bay, ON
- Full-time
The Sr. Electrical Engineer works closely with other engineering disciplines in order to provide crucial electrical decisions and technical strategic data to support Redpath’s projects.…
Added 4 hours ago
HR
Electrical Installations Design Engineer –Rail Systems
Hitachi Rail
Toronto, ON
- $95,102 to $142,653 CAD / year
- Full-time
The Electrical Installations Design Engineer is responsible for the detailed design and coordination of electrical installation systems, including equipment layout, cable routing, conduit…
Added 5 hours ago
CE
Electrical Engineer – Critical Facilities / Data Center Design
Colm Engineering Ltd
Vaughan, ON
- Full-time
We are seeking a highly skilled Electrical Engineer with experience in mission-critical facility and data center design to join our dynamic team. This role involves leading the electrical…
Added 5 hours ago
HT
Product Development Engineer
Husky Technologies
Bolton, ON
- Full-time
Our Development Engineering team is looking to hire an experienced Product Development Engineer. The successful candidate will lead the technical development of packaging products working…
Added 6 hours ago
AC
Maintenance Manager - Maintenance & Housekeeping
Aramark Canada
Toronto, ON
- Full-time
Certified Engineering Technologist (CET) or higher, such as a Bachelor of Engineering (B.Eng.) or Professional Engineer (P.Eng.) designation.
Added 7 hours ago
OP
RF Systems Engineer
Open People Network (OPN)
Toronto, ON · Greater Toronto Area, Canada
- Full-time
Osprey Systems is building Canada’s sovereign counter-drone capability. Our distributed detection and interception system is designed for the environments where everything else fails:…
Added 7 hours ago
OP
Signal Processing Engineer (Acoustic)
Open People Network (OPN)
Toronto, ON · Greater Toronto Area, Canada
- Full-time
Osprey Systems is building Canada’s sovereign counter-drone capability. Our distributed detection and interception system is designed for the environments where everything else fails:…
Added 7 hours ago
O
FPGA AI Accelerator Engineer
O-HIVE.AI
Windsor, ON
- Full-time
We are seeking a talented and motivated FPGA Engineer to join our engineering team and contribute to the development of hardware-accelerated spatial vision and edge AI systems.
Added 8 hours ago
AM
Mechanical Manufacturing Engineer
Avl manufacturing
Hamilton, ON
- $70,000 to $90,000 CAD / year
- Full-time
…acoustical design and airflow analysis to deliver fully integrated power-generation and energy-storage…
Added 8 hours ago
AM
Electrical Manufacturing Engineer
Avl manufacturing
Hamilton, ON
- $70,000 to $95,000 CAD / year
…acoustical design and airflow analysis to deliver fully integrated power-generation and energy-storage…
Added 9 hours ago
WT
Building automation systems (bas) technician
Watershed Technologies Inc.
North York, ON
- From $37 CAD / hour
- Full-time
Energy management and systems technology/technician
Added 9 hours ago
A
Structural Engineer
AtkinsRéalis
Vancouver, BC
- Full-time
…technology to transform the world's infrastructure and energy systems. Together, with our industry partners and clients, and our global team of consultants, designers, engineers and project…
Added 10 hours ago
FE
Outside sales representative
Franklin Empire Inc.
Boucherville, QC
- $55,000 to $100,000 CAD / year
- Full-time
- Hybrid
Operate computerized inventory record keeping and re-ordering systems
Added 10 hours ago
CE
Senior Electrical Engineer, Traffic Signals Team Lead
Colm Engineering Ltd
Hamilton, ON
- Full-time
Design power distribution and street lighting systems for residential/commercial developments
Added 10 hours ago
CE
Project Designer/Manager – Traffic Signals
Colm Engineering Ltd
Hamilton, ON
- Full-time
Design traffic signalization and street lighting systems for municipal / provincial road projects
Added 10 hours ago
BF
4th Class Power Engineer - Permanent, FT, Day, Afternoon, Evening/Night (rotate every 3-weeks)
Burnbrae Farms
Winnipeg, MB
- Full-time
Possession of a valid 4th Class Power Engineer Certificate.
Added 11 hours ago
W
Sr. Software Development Engineer / Principal, Software Development Engineer
Workday
Vancouver, BC · Canada, BC, Vancouver
- Full-time
…agent and machine learning use case. We own the services that power all production AI workloads, serving as the gateway to vendor-hosted LLMs on GCP and AWS Bedrock and operating the model…
Added 11 hours ago
HT
Product Development Engineer
Husky Technologies
Bolton, ON
- Full-time
Our Development Engineering team is looking to hire an experienced Product Development Engineer. The successful candidate will lead the technical development of packaging products working…
Added 12 hours ago
T
Tooling SME, Product Delivery & Transformation
TD
Toronto, ON
- Full-time
BI & Analytics: Experience developing dashboards, reports, and data-driven insights using Power BI or similar tools.
Added 12 hours ago
TE
Project Manager
TC Energy
Calgary, AB · Winnipeg, MB · Bolton, ON
- Full-time
…of all assets located within TC Energy's Canadian pipeline…
Added 13 hours ago
ES
Senior Java Engineer
EPAM Systems
Toronto, ON
- Full-time
Join a high-impact engineering team building the distributed systems that power corporate actions and investment data processing. You will design, own, and evolve production-grade Java…

RCM Technologies, Inc.

Protection and Control Designer (Mid-Level)

Mississauga, ON, Canada

Full-time

Apply About employer

Applications open in a new tab.

Job details

Job type: Full-time
Apply by: Nov 8, 2026
Experience: 3–7 years of experience in protection and control design for high voltage substations (utility, transmission, distribution, or industrial).
Posting language: English
Posted: Oct 9, 2026

Original job description

Posting # 2026-PC-02EII

Position: Protection and Control Designer (Mid- Level)

Position Type: Full-time

Position Location: Mississauga, Ontario

Job Description And Summary

RCMT Energy Services is seeking an experienced Protection and Control Designer with a strong background in high voltage substations to join its team in Mississauga, ON, Canada.

The successful candidate will prepare protection and control design packages for high voltage substation projects, working independently with minimal guidance under the direction of the Lead Engineer.

Projects may include travel to client sites as needed to perform job functions at existing facilities, such as, but not limited to, field verification and collecting the data needed to prepare the design.

Responsibilities

Prepare protection and control design deliverables for high voltage substations, including single-line and three-line diagrams, AC/DC schematics, wiring and interconnection diagrams, and protection and control logic diagrams.
Develop relay and control panel layouts, front and rear panel elevations, panel wiring diagrams, and cable and conduit schedules.
Prepare bills of material and assist with the selection of protection relays, IEDs, RTUs, meters, and auxiliary devices (GE UR, SEL, ABB, Siemens, etc.).
Support engineers with relay setting and configuration files, protection coordination, and design calculations (e.g., battery and charger sizing, DC load, and AC station service).
Prepare SCADA, communications, and network design documentation, including points lists, RTU/gateway I/O, communication architecture, and fibre/network diagrams.
Perform field verification at existing facilities, mark up drawings, and incorporate construction and commissioning red-lines into as-built drawings.
Coordinate with engineers, designers, drafters, and project stakeholders to ensure deliverables meet project scope, schedule, client standards, and applicable codes.
Perform self-checks and peer checks of design packages to ensure quality and consistency.
Support construction and commissioning activities, including responding to RFIs and field design changes as required.

Requirements

Diploma in Electrical Engineering Technology or a bachelor’s degree in Electrical Engineering, or an equivalent combination of education and experience.
A P.Eng. license is not required. C.E.T. certification (OACETT) or EIT status is considered an asset.
3–7 years of experience in protection and control design for high voltage substations (utility, transmission, distribution, or industrial).
Solid working knowledge of high voltage substation protection and control systems, including line, transformer, bus, breaker failure, and feeder protection schemes, instrument transformers (CTs/VTs), AC/DC systems, and interlocking and control schemes.
Ability to read and interpret protection and control schematics, relay logic, and vendor drawings.
Familiarity with IEC 61850, DNP3, Modbus, SCADA, and RTU communications.
Proficient in AutoCAD and/or MicroStation and related products; experience with AutoCAD Electrical is an asset.
Familiarity with applicable codes and standards (CSA, IEEE, IEC, Ontario Electrical Safety Code) and utility design standards is an asset.
Proficient with Microsoft Office.
Demonstrated ability to handle multiple tasks simultaneously and apply sound judgment, initiative, and decision making.
Strong verbal and written communication skills.
Strong interpersonal skills to interact with clients, equipment vendors, and construction contractors.
Ability to be flexible and work with competing priorities.
Willingness to travel to client sites as required.
Must be a Canadian citizen or permanent resident, or hold a valid work permit for work in Canada.

RCMT Energy Services

RCMT's Energy Services Division is a comprehensive Engineering/Architectural design and construction management firm providing clients with total solutions for their project needs. RCMT provides the highest quality services in all engineering disciplines to utility, industrial, commercial, and institutional customers.

https://www.rcmt.com/energyservices/

At RCMT, we believe the key to success is working with our clients to define the correct technical staff and resources necessary to assure each project phase can be executed within the client's guidelines. This requires technical personnel with a depth of experience in all phases of project execution.

Experienced, multi-discipline project teams offer the full range of comprehensive services necessary to successfully execute all aspects of power delivery, generation, commercial and industrial projects.
Proven project management skills and tools are applied to all tasks to achieve budget and schedule commitments.
Highly responsive, flexible, and cost-effective total solutions consistently delivering results that exceed our customers' expectations.

Competitive Salary offered, along with benefits such as Health, Dental and Vision Plans, a well-being program and more. Salary and Title are commensurate with experience.

RCM Technologies Canada Corp. adheres to all applicable legislation, including the Occupational Health and Safety Act, and the Ontario Human Rights Code. RCM Technologies Canada Corp. is committed to workplace diversity and provides accommodations to applicants with disabilities throughout our hiring process in accordance with the Accessibility for Ontarians with Disabilities Act (AODA).

RCM is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Disclaimer

This job description is intended to describe the general nature and the level of the work being performed by the people assigned to this position. It is not intended to include every job duty and responsibility specific to the position. RCM reserves the right to amend and change responsibilities to meet business and organizational needs as necessary.

Apply About employer

More about this job

Responsibilities

Prepare protection and control design packages for high-voltage substations, including diagrams, schematics, panel layouts, relay and communications documentation, bills of material, and design calculations. Verify existing site conditions, update as-built drawings, coordinate with project stakeholders, check design quality, and support construction and commissioning activities.

Requirements

Requires a diploma in Electrical Engineering Technology, a bachelor’s degree in Electrical Engineering, or equivalent education and experience, plus 3–7 years of high-voltage substation protection and control design experience. Candidates should understand substation protection systems and communications protocols, be proficient with AutoCAD and/or MicroStation, communicate effectively, and be eligible to work in Canada; C.E.T. certification or EIT status is an asset.

Skills

High-Voltage Substation Protection and Control Design
Protection and Control Schematics
Relay Logic
AutoCAD
MicroStation
AutoCAD Electrical
IEC 61850
DNP3
Modbus
SCADA and RTU Communications
Relay Configuration
Protection Coordination
Design Calculations
Field Verification
Technical Drawing Review
Project Coordination

Benefits

Health Plan
Dental Plan
Vision Plan
Well-Being Program

Visa sponsorship

Not detected in the job text

Keywords

High-Voltage Substations
Protection and Control Design
Single-Line Diagrams
Three-Line Diagrams
AC/DC Schematics
Wiring and Interconnection Diagrams
Protection Relays
IEDs
RTUs
Meters
Relay Panels
SCADA
IEC 61850
DNP3
Modbus
AutoCAD
MicroStation
AutoCAD Electrical
OACETT
C.E.T.
EIT
CSA Standards
IEEE Standards
IEC Standards
Ontario Electrical Safety Code
Field Verification
Protection Coordination
Battery and Charger Sizing
Construction and Commissioning
As-Built Drawings

Report this job