Find work in Canada.

320,889 jobs across our Canadian network. How we count

Jobs in Canada

25+ jobs

Email me new jobs Save this search

Added 17 mins ago
C-
Technical Sales and Field Service Engineer
Captiveaire - Region 114 Western PA
Saskatoon, SK
- Full-time
Every day I get to help someone. Whether it's an engineer with a design, a contractor with a troubleshooting issue, or an end user looking for help to obtain better indoor air quality. I…
Added 2 hours ago
RR
Hardware Test Engineer
Remote Robotic
Ottawa, ON · Kanata, ON
- $82,000 to $100,000 CAD / year
- Full-time
AirMetal is looking for a Test Engineer, FPV Electronics to develop the systems that validate the performance, reliability, and quality of our FPV and uncrewed-aircraft electronics.
Added 6 hours ago
A
Hardware Engineer
Actalent
Ottawa, ON
- $55 to $65 CAD / hour
- Full-time
310 years of experience in electrical power system design within one or more of the following industries: telecommunications, automotive, industrial systems, or avionics.
Added 6 hours ago
A
Power Electronics Design Engineer
Actalent
Ottawa, ON
- $55 to $65 CAD / hour
- Full-time
310 years of experience in electrical power system design within one or more of the following industries: telecommunications, automotive, industrial systems, or avionics.
Added 8 hours ago
Mechanical Engineer Co-op
Moment Energy
Surrey, BC
We are seeking a Mechanical Engineering Co-op to join our Engineering team, starting in January. In this role, you will support the design, development, and testing of our battery energy…
Added 8 hours ago
X
Data Center Infrastructure Engineer
Xanadu
Toronto, ON
- Full-time
As part of the Hardware Team in Toronto, you will take your experience in delivering complex mechanical, vibration-control, and thermal-cooling solutions and apply it to Xanadu’s rack-scale…
Added 9 hours ago
WI
Lead Instrumentation & Control Engineer, Resources
WSP in Canada
Markham, ON
- Full-time
…full project lifecycle - from conceptual studies and detailed design to commissioning, optimization, and…
Added 9 hours ago
AD
Manufacturing Engineer
Active Dynamics Group
Toronto, ON
- Full-time
As a world leader in the design and manufacturing industry, Active Dynamics is seeking an eager and enthusiastic experienced Manufacturing Engineer to join our successful Toronto team! We…
Added 9 hours ago
AD
Process Development Engineer
Active Dynamics Group
Toronto, ON
- Full-time
As a world leader in the design and manufacturing industry, Active Dynamics is seeking an eager and enthusiastic experienced Process Development Engineer (NPI & Production Support) to join…
Added 9 hours ago
H
Senior Test & Validation Engineer
Humanoid
Burnaby, BC
- Full-time
You will work closely with mechanical design, firmware, controls, manufacturing, and system integration teams to diagnose unstable behavior, define the right parameters and models, and…
Added 9 hours ago
AD
Process Development Engineer
Active Dynamics
Toronto, ON
- $62,000 to $72,000 CAD / year
- Full-time
As a world leader in the design and manufacturing industry, Active Dynamics is seeking an eager and enthusiastic experienced Process Development Engineer (NPI & Production Support) to join…
Added 9 hours ago
AD
Manufacturing Engineer
Active Dynamics
Toronto, ON
- $58,000 to $68,000 CAD / year
- Full-time
As a world leader in the design and manufacturing industry, Active Dynamics is seeking an eager and enthusiastic experienced Manufacturing Engineer to join our successful Toronto team! We…
Added 9 hours ago
Senior Instrumentation & Controls Engineer - Industrial Sector
Kiewit
Calgary, AB
Our rapidly growing Industrial Engineering team, which includes process, mechanical, electrical, controls, structural, architectural, geotechnical, and civil disciplines, is a multi-faceted…
Added 10 hours ago
A
Mechanical Engineer, Data Centers
AECOM
Markham, ON
- $90,000 to $145,000 CAD / year
- Full-time
AECOM is seeking a Mechanical Engineer to join our growing Canadian Data Center practice. This role will support the design and delivery of hyperscale, colocation, and other…
Added 10 hours ago
A
Senior Electrical Engineer, Data Centers
AECOM
Markham, ON
- $125,000 to $175,000 CAD / year
- Full-time
Strong power-distribution and electrical-system design experience.
Added 10 hours ago
A
Senior Mechanical Engineer, Data Centers
AECOM
Markham, ON
- $125,000 to $175,000 CAD / year
- Full-time
Strong HVAC, cooling and mechanical-system design experience.
Added 10 hours ago
RT
Engineer Enterprise Asset Management
Rio Tinto
Kitimat, BC
- Full-time
We are looking for an Engineer to support the design, governance and continuous improvement of asset master data across our maintenance systems. In this role, you will apply engineering…
Added 10 hours ago
CE
Senior/Principal Electrical Engineer
Capital Engineering (Partnership)
AB · Edmonton, AB
- Full-time
Coordinate project electrical design activities with other engineering disciplines (Piping, Civil, Mechanical, Process, Automation, etc.).
Added 10 hours ago
Senior Electrical Engineer
Cyclic Materials Inc.
Toronto, ON
We are seeking an experienced Senior Electrical Engineer to lead and support electrical engineering efforts for our recycling operations. Reporting to the SME Electrical Engineering, you…
Added 10 hours ago
CM
Senior Electrical Engineer
Cyclic Materials
Toronto, ON
- Full-time
We are seeking an experienced Senior Electrical Engineer to lead and support electrical engineering efforts for our recycling operations. Reporting to the SME Electrical Engineering, you…
Added 11 hours ago
TT
HVAC engineer
Trane Technologies
Montreal, QC
- Full-time
…expertise to create truly autonomous buildings. We’re looking for a Mechanical Engineer who brings deep knowledge of HVAC system design, commissioning, and field implementation - someone…
Added 11 hours ago
MI
Hemming Engineer
Magna International
Brampton, ON
- Full-time
· Mechanical Engineering Degree/Diploma/ Certificate of Qualification and/ or applicable design experience
Added 11 hours ago
H
Sensor Fusion Engineer
Hexagon
Calgary, AB
- Full-time
Hexagon’s Autonomy & Positioning division is looking for a Sensor Fusion Engineer to join our high-tech engineering and manufacturing company that is committed to customer service…
Added 11 hours ago
HA
Sensor Fusion Engineer
Hexagon Autonomous Solutions
Calgary, AB
- Full-time
Hexagon’s Autonomy & Positioning division is looking for a Sensor Fusion Engineer to join our high-tech engineering and manufacturing company that is committed to customer service…
Added 11 hours ago
RC
Renewable Energy Engineer (Entry-Level)
Renewable Careers
Toronto, ON
- $80,000 to $110,000 CAD / year
- Full-time
…are expanding our Toronto team and looking for an entry-level engineer who wants to help build Canada's clean energy…

Remote Robotic

Hardware Test Engineer

Ottawa, ON, Canada
Kanata, ON, Canada

$82,000 to $100,000 CAD / year · Full-time

Apply About employer

Applications open in a new tab.

Job details

Pay: $82,000 to $100,000 CAD / year
Job type: Full-time
Apply by: Nov 4, 2026
Posting language: English
Posted: Oct 5, 2026

Original job description

About Remote Robotic Systems

Help build and validate advanced electronics operating at the intersection of aerospace, robotics, and defence technology.

Remote Robotic Systems (RRS) is a Canadian robotics and defence-tech company helping organizations deploy enterprise-grade drones, uncrewed aircraft, robotic platforms, sensors, payloads, and remote operations technologies for mission-critical applications. Our solutions support customers across defence, public safety, security, industrial, infrastructure, energy, and government sectors.

Through our AirMetal team, we develop advanced aerospace, communications, and autonomous systems designed for demanding real-world environments.

We’re a small, fast-moving engineering team that values ownership, technical depth, practical problem solving, and the ability to turn ambitious ideas into working systems. Team members have the opportunity to contribute directly to product decisions and see their work move quickly from concept to deployment.

The Role

AirMetal is looking for a Test Engineer, FPV Electronics to develop the systems that validate the performance, reliability, and quality of our FPV and uncrewed-aircraft electronics.

You will design, build, and operate automated test systems for flight controllers, electronic speed controllers, motors, cameras, video transmitters, radio links, and power systems. You will own testing from bench characterization through production end-of-line screening and flight validation.

Your test data will help determine which components and vendors we use, which designs move into production, and where hardware or firmware changes are required. This is a hands-on role that combines electronics testing, software development, laboratory integration, production support, and flight-test validation.

What You Will Work On

Automated Test Systems

Design, build, and maintain automated test fixtures, including bed-of-nails and pogo-pin jigs, thrust stands, dynamometers, environmental setups, and RF test benches.
Develop test software, preferably in Python, to control test equipment, automate test sequences, and analyze results.
Build test systems that log results to a shared database and maintain traceability by serial number.
Integrate laboratory instruments, including oscilloscopes, electronic loads, programmable power supplies, data-acquisition systems, spectrum analyzers, thermal cameras, and load cells.
Develop repeatable testing that allows production teams to screen units in minutes rather than hours.

Electronics and Subsystem Testing

Test flight controllers for IMU noise, bias, vibration rejection, gyro-loop timing and jitter, sensor health, and communication-bus performance.
Verify firmware flashing and configuration across platforms such as Betaflight, ArduPilot, PX4, and internally developed firmware.
Characterize ESC and motor performance, including thrust, torque, RPM, efficiency, current limits, thermal behaviour, protocol conformance, telemetry accuracy, desynchronization, step response, and burn-in under load.
Evaluate cameras and video systems for latency, low-light performance, dynamic range, image quality, and analog and digital link behaviour.
Test RF and control links for output power, spectral compliance, receiver sensitivity, range, latency, and interference behaviour.
Characterize batteries, regulators, and power systems for capacity, internal resistance, discharge behaviour, ripple, transient response, and brownout performance.

Testing, Validation, and Failure Analysis

Develop test plans and procedures from product and system requirements.
Report pass or fail results with clear supporting data and performance margins.
Conduct environmental and reliability testing, including temperature, vibration, humidity, and accelerated stress screening.
Qualify incoming components and vendor-supplied boards.
Investigate hardware failures and work with suppliers on root-cause analysis and corrective action.
Correlate bench-test data with flight logs from systems such as Blackbox, DataFlash, and ULog.
Support outdoor flight-test campaigns and analyze results.
Communicate failures, trends, and root-cause evidence to hardware, firmware, production, and supplier teams.

Core Requirements

A degree in electrical, computer, mechatronics, or aerospace engineering, or equivalent demonstrated hands-on experience.
Experience building automated test fixtures or test systems for electronics hardware.
Strong Python skills for instrument control, test automation, and data analysis.
Experience with tools or libraries such as PyVISA, pandas, NumPy, or similar.
Confidence working with oscilloscopes, electronic loads, programmable power supplies, power analyzers, data-acquisition systems, and logic analyzers.
Working knowledge of BLDC motor control, switching power electronics, and lithium battery behaviour.
Ability to read schematics, probe circuit boards, troubleshoot failures, and document findings.
Familiarity with embedded communication buses, including UART, SPI, I2C, and CAN.
Experience flashing and configuring firmware on microcontrollers such as STM32.
Ability to create clear test plans and reports that can be understood and acted on by both technical and non-technical stakeholders.
Hands-on FPV experience, including building, tuning, and flying your own quadcopters.
Ability to work on-site in Kanata, Ontario, including laboratory and outdoor flight-test work.

Applicants will be assessed primarily on what they have built, tested, and measured rather than on years of experience alone.

Nice to Have

RF testing experience using spectrum analyzers, vector network analyzers, or comparable equipment.
Experience with conducted and radiated power testing or receiver-sensitivity testing.
Contributions to or deep familiarity with Betaflight, ArduPilot, PX4, or ExpressLRS.
Experience with hardware test frameworks, continuous integration for hardware, or hardware-in-the-loop test systems.
Familiarity with pytest, OpenHTF, or comparable test frameworks.
Mechanical design experience using SolidWorks, Fusion 360, or Onshape.
Experience designing and 3D-printing custom test fixtures.
PCB design experience using KiCad or Altium.
Familiarity with environmental and reliability standards such as MIL-STD-810 or RTCA DO-160.
Manufacturing test experience, including end-of-line stations, yield tracking, or statistical process control.
Experience with tactical radio systems or defence programs.
An Advanced RPAS Pilot Certificate from Transport Canada.

What Will Make You Successful

You trust measured data and real-world testing over assumptions.
You enjoy building test systems, working directly with hardware, and finding the source of difficult technical failures.
You can move comfortably between software, electronics, laboratory equipment, production systems, and flight testing.
You bring structure and repeatability to testing that may initially be manual or undefined.
You communicate technical findings clearly and support conclusions with evidence.
You take ownership of problems from test definition through investigation and resolution.
You understand that a useful test system must be accurate, maintainable, traceable, and practical for production teams to operate.
You enjoy working in a fast-paced environment where test results directly influence product and supplier decisions.

What We Offer

The opportunity to build test infrastructure for advanced FPV and uncrewed-aircraft electronics.
Direct impact on component selection, product performance, production quality, and technical decision-making.
Hands-on involvement across laboratory testing, automated systems, production screening, and flight validation.
Exposure to robotics, aerospace, autonomy, communications, embedded hardware, and defence technologies.
Close collaboration with hardware, firmware, manufacturing, and flight-test teams.
A fast-paced environment where your work has a visible impact.
Competitive compensation, benefits, and equity participation.

Employment Details

Type: Full-time

Location: On-site in Kanata, Ontario

Compensation: Competitive compensation, benefits, and equity participation, based on experience and fit for the role.

Travel: Occasional travel to test ranges, customer locations, suppliers, and field trials may be required.

This posting is for an newly-created position.

Controlled Goods and security requirements: This role involves access to controlled goods and technical data. Employment may be conditional on the successful candidate’s ability to complete the required assessments and obtain and maintain any security clearance appropriate to the work.

Field work: This role includes live outdoor flight testing in varying weather conditions.

Use of AI in hiring: We may use AI tools to help with parts of our hiring process, such as reviewing applications, screening resumes, and evaluating candidate responses. These tools support our team, but people make all hiring decisions. AI is used to assist, not replace, human judgment.

Application Process

If you’re excited about electronics testing, FPV systems, automated test infrastructure, and building hardware that performs reliably in demanding real-world environments, we’d love to hear from you.

Submit your resume together with a short description of a test system, fixture, or electronics project you personally built. Please describe what the system tested, the equipment or software you used, and how you determined whether it was working correctly. Links to a portfolio, repository, photographs, or non-confidential test data are welcome.

Remote Robotic Systems is an equal opportunity employer. If you require accommodation during the recruitment process, please let us know.

Apply About employer

More about this job

Responsibilities

Design, build, and operate automated test systems to characterize and validate FPV and uncrewed-aircraft electronics, from bench testing through production screening and flight validation. Analyze test and flight data, investigate failures, and communicate evidence-based findings to hardware, firmware, production, and supplier teams.

Requirements

Candidates need an engineering degree or equivalent hands-on experience, experience building electronics test systems, strong Python automation and data-analysis skills, and confidence using laboratory instruments. They should also have working knowledge of motor control, power electronics, batteries, embedded communication buses, firmware configuration, and hands-on FPV quadcopter building, tuning, and flying.

Skills

Automated Test Systems
Python
Electronics Testing
Test Fixture Design
Test Automation
Data Analysis
Oscilloscopes
RF Testing
BLDC Motor Control
Switching Power Electronics
Lithium Battery Testing
Embedded Communication Buses
Firmware Flashing
Failure Analysis
FPV Drone Building and Flight Testing
Test Planning and Reporting

Benefits

Competitive Compensation
Benefits
Equity Participation

Visa sponsorship

Not detected in the job text

Keywords

FPV Electronics
Uncrewed Aircraft
Automated Test Systems
Python
PyVISA
Pandas
NumPy
Oscilloscopes
Electronic Loads
Programmable Power Supplies
Data-Acquisition Systems
Spectrum Analyzers
Flight Controllers
Betaflight
ArduPilot
PX4
BLDC Motors
Electronic Speed Controllers
Lithium Batteries
UART
SPI
I2C
CAN
STM32
RF Testing
Hardware-in-the-Loop
pytest
OpenHTF
SolidWorks
KiCad

Report this job