Find work in Canada.

322,489 jobs across our Canadian network. How we count

Jobs in Canada

25+ jobs

Email me new jobs Save this search

Added 1 hour ago
MV
*Senior Project Engineer
Metro Vancouver
Burnaby, BC
- Full-time
You are a well-rounded Electrical, Controls & Automation Professional Engineer with solid technical design and extensive commissioning experience with industrial process facilities as a…
Added 1 hour ago
M
Building Infrastructure Project Manager
MDA
Sainte-Anne-de-Bellevue, QC
- Full-time
Building the space between proven and possible, MDA Space is a trusted mission partner to the global space industry. A robotics, satellite systems and geointelligence pioneer with a…
Added 8 hours ago
RH
Product Manager
Robert Half
Mississauga, ON
- $85,000 to $95,000 CAD / year
- Full-time
Develop a strong understanding of electronic control products, including circuit boards, connectors, embedded software, inputs/outputs, and electrical power concepts.
Added 15 hours ago
RR
Hardware Test Engineer
Remote Robotic
Ottawa, ON · Kanata, ON
- $82,000 to $100,000 CAD / year
- Full-time
Remote Robotic Systems (RRS) is a Canadian robotics and defence-tech company helping organizations deploy enterprise-grade drones, uncrewed aircraft, robotic platforms, sensors, payloads,…
Added 19 hours ago
A
Hardware Engineer
Actalent
Ottawa, ON
- $55 to $65 CAD / hour
- Full-time
We are expanding our hardware engineering team with Electrical Power Systems Engineers who will design and develop next-generation AC/DC and DC/DC power supply solutions for high-demand…
Added 19 hours ago
A
Power Electronics Design Engineer
Actalent
Ottawa, ON
- $55 to $65 CAD / hour
- Full-time
We are expanding our hardware engineering team with Electrical Power Systems Engineers who will design and develop next-generation AC/DC and DC/DC power supply solutions for high-demand…
Added 21 hours ago
SE
Power System Junior Engineer
Schneider Electric
Winnipeg, MB · Toronto, ON · Ottawa, ON · Montreal, QC · Richmond, BC · UNAVAILABLE, Alberta
- Full-time
Perform power system engineering analysis of industrial and commercial electric power systems in the areas of coordination of protection, short-circuit calculation, arc-flash hazard…
Added 22 hours ago
SE
Power System Junior Engineer
Schneider Electric
AB · Alberta, Canada
- $64,000 to $96,000 CAD / year
- Full-time
Perform power system engineering analysis of industrial and commercial electric power systems in the areas of coordination of protection, short-circuit calculation, arc-flash hazard…
Added 22 hours ago
SE
Power System Junior Engineer
Schneider Electric
Richmond, BC
- $64,000 to $96,000 CAD / year
- Full-time
Perform power system engineering analysis of industrial and commercial electric power systems in the areas of coordination of protection, short-circuit calculation, arc-flash hazard…
Added 22 hours ago
SE
Power System Junior Engineer
Schneider Electric
Winnipeg, MB
- $64,000 to $96,000 CAD / year
- Full-time
Perform power system engineering analysis of industrial and commercial electric power systems in the areas of coordination of protection, short-circuit calculation, arc-flash hazard…
Added 22 hours ago
SE
Power System Junior Engineer
Schneider Electric
Toronto, ON
- $64,000 to $96,000 CAD / year
- Full-time
Perform power system engineering analysis of industrial and commercial electric power systems in the areas of coordination of protection, short-circuit calculation, arc-flash hazard…
Added 22 hours ago
SE
Power System Junior Engineer
Schneider Electric
Montreal, QC
- $64,000 to $96,000 CAD / year
- Full-time
Perform power system engineering analysis of industrial and commercial electric power systems in the areas of coordination of protection, short-circuit calculation, arc-flash hazard…
Added 22 hours ago
SS
Electrical Engineer IV
Select Source International
Markham, ON
- $70 to $80 USD / hour
- Contract
This position will be responsible for executing Protection and Control Engineering and Consulting services in Transmission, Distribution and Industrial markets in the US and Canada.…
Added 1 day ago
SM
Instrumentation & Controls Engineer/Technologist (Intermediate)
Solaris Management Consultants Inc
Surrey, BC · Calgary, AB
- $85,000 to $140,000 CAD / year
- Full-time
As an Instrumentation & Controls Engineer, you will play a key role in the design, implementation, and commissioning of instrumentation and control systems for gas plants, compressor…
Added 1 day ago
LC
Electrical Engineer/ Senior Electrical Technologist
Level Consulting Engineers Ltd.
Foothills No 31, AB · Foothills, AB
- Full-time
Level Consulting Engineers is a full-service mechanical and electrical consulting firm specializing in HVAC, plumbing, fire protection, lighting, power, communications, fire alarm, and key…
Added 3 days ago
S
Mechanical & Electrical Construction Inspector
SearchLabs
Toronto, ON
- Full-time
how mechanical and electrical building systems are installed, tested,
Added 3 days ago
T
Electrical & Instrumentation Engineer
Tenova
Mississauga, ON
- Full-time
The successful candidate will have hands-on experience with industrial control systems, PLCs, HMI/SCADA platforms, motor control systems, instrumentation, electrical panels, and process…
Added 3 days ago
BC
Principal Test Specialist, Electrical
Babcock Canada Inc.
Victoria, BC
- Full-time
Alternating Current systems and power distribution control systems
Added 4 days ago
CT
Freight Conductor - Beauharnois, QC
CSX Transportation
Beauharnois, QC
- Full-time
Comprehend color and/or hand signals and systems
Added 4 days ago
GS
Electrical Engineer/Designer
Grantek Systems Integration
Burlington, ON
- Full-time
The Electrical Engineer/Designer at Grantek is an exciting opportunity for an intermediate to senior-level professional with a strong background in electrical design and industrial control…
Added 4 days ago
G
Electrical Engineer/Designer
Grantek
Burlington, ON
- Full-time
The Electrical Engineer/Designer at Grantek is an exciting opportunity for an intermediate to senior-level professional with a strong background in electrical design and industrial control…
Added 4 days ago
LI
Mid-level Structural Engineer - Safety
LJB Inc.
Markham, ON
- Full-time
We are looking to fill the role of a Mid-level Structural Engineer to work for our Safety practice in our Toronto, ON office. The Mid-level Structural Engineer will analyze, design, plan,…
Added 4 days ago
GV
Ingénieur Électrique Application Clients - Customer Application Engineer
GE Vernova
La Prairie, QC
- Full-time
The Lead Application Engineer is a technical leader within the engineering team. You will contribute to the commercial strategy through their technical and economic understanding of the…
Added 4 days ago
A
Project Manager
AtkinsRéalis
Toronto, ON
- Full-time
We're AtkinsRéalis, a world-class engineering services and nuclear organization. We connect people, data and technology to transform the world's infrastructure and energy systems. Together,…
Added 5 days ago
A
Automation & Controls Engineer III
Anaergia
Burlington, ON
- Full-time
The Automation & Controls Engineer III is a senior individual contributor who independently leads the technical delivery of industrial automation and process control systems throughout the…

Remote Robotic

Hardware Test Engineer

Ottawa, ON, Canada
Kanata, ON, Canada

$82,000 to $100,000 CAD / year · Full-time

Apply About employer

Applications open in a new tab.

Job details

Pay: $82,000 to $100,000 CAD / year
Job type: Full-time
Apply by: Nov 4, 2026
Posting language: English
Posted: Oct 5, 2026

Original job description

About Remote Robotic Systems

Help build and validate advanced electronics operating at the intersection of aerospace, robotics, and defence technology.

Remote Robotic Systems (RRS) is a Canadian robotics and defence-tech company helping organizations deploy enterprise-grade drones, uncrewed aircraft, robotic platforms, sensors, payloads, and remote operations technologies for mission-critical applications. Our solutions support customers across defence, public safety, security, industrial, infrastructure, energy, and government sectors.

Through our AirMetal team, we develop advanced aerospace, communications, and autonomous systems designed for demanding real-world environments.

We’re a small, fast-moving engineering team that values ownership, technical depth, practical problem solving, and the ability to turn ambitious ideas into working systems. Team members have the opportunity to contribute directly to product decisions and see their work move quickly from concept to deployment.

The Role

AirMetal is looking for a Test Engineer, FPV Electronics to develop the systems that validate the performance, reliability, and quality of our FPV and uncrewed-aircraft electronics.

You will design, build, and operate automated test systems for flight controllers, electronic speed controllers, motors, cameras, video transmitters, radio links, and power systems. You will own testing from bench characterization through production end-of-line screening and flight validation.

Your test data will help determine which components and vendors we use, which designs move into production, and where hardware or firmware changes are required. This is a hands-on role that combines electronics testing, software development, laboratory integration, production support, and flight-test validation.

What You Will Work On

Automated Test Systems

Design, build, and maintain automated test fixtures, including bed-of-nails and pogo-pin jigs, thrust stands, dynamometers, environmental setups, and RF test benches.
Develop test software, preferably in Python, to control test equipment, automate test sequences, and analyze results.
Build test systems that log results to a shared database and maintain traceability by serial number.
Integrate laboratory instruments, including oscilloscopes, electronic loads, programmable power supplies, data-acquisition systems, spectrum analyzers, thermal cameras, and load cells.
Develop repeatable testing that allows production teams to screen units in minutes rather than hours.

Electronics and Subsystem Testing

Test flight controllers for IMU noise, bias, vibration rejection, gyro-loop timing and jitter, sensor health, and communication-bus performance.
Verify firmware flashing and configuration across platforms such as Betaflight, ArduPilot, PX4, and internally developed firmware.
Characterize ESC and motor performance, including thrust, torque, RPM, efficiency, current limits, thermal behaviour, protocol conformance, telemetry accuracy, desynchronization, step response, and burn-in under load.
Evaluate cameras and video systems for latency, low-light performance, dynamic range, image quality, and analog and digital link behaviour.
Test RF and control links for output power, spectral compliance, receiver sensitivity, range, latency, and interference behaviour.
Characterize batteries, regulators, and power systems for capacity, internal resistance, discharge behaviour, ripple, transient response, and brownout performance.

Testing, Validation, and Failure Analysis

Develop test plans and procedures from product and system requirements.
Report pass or fail results with clear supporting data and performance margins.
Conduct environmental and reliability testing, including temperature, vibration, humidity, and accelerated stress screening.
Qualify incoming components and vendor-supplied boards.
Investigate hardware failures and work with suppliers on root-cause analysis and corrective action.
Correlate bench-test data with flight logs from systems such as Blackbox, DataFlash, and ULog.
Support outdoor flight-test campaigns and analyze results.
Communicate failures, trends, and root-cause evidence to hardware, firmware, production, and supplier teams.

Core Requirements

A degree in electrical, computer, mechatronics, or aerospace engineering, or equivalent demonstrated hands-on experience.
Experience building automated test fixtures or test systems for electronics hardware.
Strong Python skills for instrument control, test automation, and data analysis.
Experience with tools or libraries such as PyVISA, pandas, NumPy, or similar.
Confidence working with oscilloscopes, electronic loads, programmable power supplies, power analyzers, data-acquisition systems, and logic analyzers.
Working knowledge of BLDC motor control, switching power electronics, and lithium battery behaviour.
Ability to read schematics, probe circuit boards, troubleshoot failures, and document findings.
Familiarity with embedded communication buses, including UART, SPI, I2C, and CAN.
Experience flashing and configuring firmware on microcontrollers such as STM32.
Ability to create clear test plans and reports that can be understood and acted on by both technical and non-technical stakeholders.
Hands-on FPV experience, including building, tuning, and flying your own quadcopters.
Ability to work on-site in Kanata, Ontario, including laboratory and outdoor flight-test work.

Applicants will be assessed primarily on what they have built, tested, and measured rather than on years of experience alone.

Nice to Have

RF testing experience using spectrum analyzers, vector network analyzers, or comparable equipment.
Experience with conducted and radiated power testing or receiver-sensitivity testing.
Contributions to or deep familiarity with Betaflight, ArduPilot, PX4, or ExpressLRS.
Experience with hardware test frameworks, continuous integration for hardware, or hardware-in-the-loop test systems.
Familiarity with pytest, OpenHTF, or comparable test frameworks.
Mechanical design experience using SolidWorks, Fusion 360, or Onshape.
Experience designing and 3D-printing custom test fixtures.
PCB design experience using KiCad or Altium.
Familiarity with environmental and reliability standards such as MIL-STD-810 or RTCA DO-160.
Manufacturing test experience, including end-of-line stations, yield tracking, or statistical process control.
Experience with tactical radio systems or defence programs.
An Advanced RPAS Pilot Certificate from Transport Canada.

What Will Make You Successful

You trust measured data and real-world testing over assumptions.
You enjoy building test systems, working directly with hardware, and finding the source of difficult technical failures.
You can move comfortably between software, electronics, laboratory equipment, production systems, and flight testing.
You bring structure and repeatability to testing that may initially be manual or undefined.
You communicate technical findings clearly and support conclusions with evidence.
You take ownership of problems from test definition through investigation and resolution.
You understand that a useful test system must be accurate, maintainable, traceable, and practical for production teams to operate.
You enjoy working in a fast-paced environment where test results directly influence product and supplier decisions.

What We Offer

The opportunity to build test infrastructure for advanced FPV and uncrewed-aircraft electronics.
Direct impact on component selection, product performance, production quality, and technical decision-making.
Hands-on involvement across laboratory testing, automated systems, production screening, and flight validation.
Exposure to robotics, aerospace, autonomy, communications, embedded hardware, and defence technologies.
Close collaboration with hardware, firmware, manufacturing, and flight-test teams.
A fast-paced environment where your work has a visible impact.
Competitive compensation, benefits, and equity participation.

Employment Details

Type: Full-time

Location: On-site in Kanata, Ontario

Compensation: Competitive compensation, benefits, and equity participation, based on experience and fit for the role.

Travel: Occasional travel to test ranges, customer locations, suppliers, and field trials may be required.

This posting is for an newly-created position.

Controlled Goods and security requirements: This role involves access to controlled goods and technical data. Employment may be conditional on the successful candidate’s ability to complete the required assessments and obtain and maintain any security clearance appropriate to the work.

Field work: This role includes live outdoor flight testing in varying weather conditions.

Use of AI in hiring: We may use AI tools to help with parts of our hiring process, such as reviewing applications, screening resumes, and evaluating candidate responses. These tools support our team, but people make all hiring decisions. AI is used to assist, not replace, human judgment.

Application Process

If you’re excited about electronics testing, FPV systems, automated test infrastructure, and building hardware that performs reliably in demanding real-world environments, we’d love to hear from you.

Submit your resume together with a short description of a test system, fixture, or electronics project you personally built. Please describe what the system tested, the equipment or software you used, and how you determined whether it was working correctly. Links to a portfolio, repository, photographs, or non-confidential test data are welcome.

Remote Robotic Systems is an equal opportunity employer. If you require accommodation during the recruitment process, please let us know.

Apply About employer

More about this job

Responsibilities

Design, build, and operate automated test systems to characterize and validate FPV and uncrewed-aircraft electronics, from bench testing through production screening and flight validation. Analyze test and flight data, investigate failures, and communicate evidence-based findings to hardware, firmware, production, and supplier teams.

Requirements

Candidates need an engineering degree or equivalent hands-on experience, experience building electronics test systems, strong Python automation and data-analysis skills, and confidence using laboratory instruments. They should also have working knowledge of motor control, power electronics, batteries, embedded communication buses, firmware configuration, and hands-on FPV quadcopter building, tuning, and flying.

Skills

Automated Test Systems
Python
Electronics Testing
Test Fixture Design
Test Automation
Data Analysis
Oscilloscopes
RF Testing
BLDC Motor Control
Switching Power Electronics
Lithium Battery Testing
Embedded Communication Buses
Firmware Flashing
Failure Analysis
FPV Drone Building and Flight Testing
Test Planning and Reporting

Benefits

Competitive Compensation
Benefits
Equity Participation

Visa sponsorship

Not detected in the job text

Keywords

FPV Electronics
Uncrewed Aircraft
Automated Test Systems
Python
PyVISA
Pandas
NumPy
Oscilloscopes
Electronic Loads
Programmable Power Supplies
Data-Acquisition Systems
Spectrum Analyzers
Flight Controllers
Betaflight
ArduPilot
PX4
BLDC Motors
Electronic Speed Controllers
Lithium Batteries
UART
SPI
I2C
CAN
STM32
RF Testing
Hardware-in-the-Loop
pytest
OpenHTF
SolidWorks
KiCad

Report this job