Find work in Canada.

328,322 jobs across our Canadian network. How we count

Jobs in Canada

Save this search

Added 9 mins ago
Mailer Line Operator
Sealed Air Corporation
Brampton, ON
Internship
2 Years experience in a manufacturing environment as a machine operator.
Added 9 mins ago
Assistant Operator-Extrusion
Sealed Air Corporation
Brampton, ON
Full-time
…extrusion) and operate the bubble extruder as directed by the operator and management. The successful candidate must be willing to switch shifts in order to cover vacation, sickness,…
Added 39 mins ago
Converting Machine Operator
Kimberly-Clark
Huntsville, ON · Canada-Ontario-Huntsville
$24.66 CAD / hour
Full-time
Operating a machine that produces top-notch products for ¼ of the world’s population is a hard job, but it’s worth it when you’re recognized often by your manager, supported by your team,…
Added 1 hour ago
Concrete products machine operator
Béton Préfabriqué Fortier Inc.
Quebec, QC
Full-time
Added 2 hours ago
Processing Operator 1 - Night Shift - Fixed term 12 months
Kenvue
Guelph, ON
Full-time
A Compression Operator running Fette and Korsch presses will face challenges in understanding tablet compression, troubleshooting defects such as weight variation, capping, and sticking,…
Added 2 hours ago
SSM & Wave Machine Operator
Dynamic Source Manufacturing
Calgary, AB
Full-time
Machine Operator - Full Time (Midnight Shift)
Added 2 hours ago
Machinist I Night Shift - Mon--Thurs 4:00pm-2:30am
Pursuit Aerospace
ON
$22 to $24 CAD / hour
Full-time
Set up and program machine tools for operator use.
Added 2 hours ago
General Production
Jeld-Wen Inc.
Woodbridge, ON
Added 3 hours ago
Equipment Operator (Travel Required)
Manufacturing Job Site
Calgary, AB
Full-time
We are hiring an experienced Heavy Equipment Operator Deep Utilities to support large underground utility and civil projects based out of Calgary, with current work near Prince Albert, SK…
Added 3 hours ago
Technical Publications Manager
Tigercat | MacDonald Steel
Brant, ON
Oversee the creation, maintenance, and delivery of operator's manuals, service manuals, parts catalogs, machine labeling artwork, safety information, technical bulletins, digital content,…
Added 5 hours ago
Sewing Machine Operator
Canada Goose
Montreal, QC
Full-time
Working from directions assigned by the Line/Section Supervisor, the Sewing Machine Operator is responsible for assessing the quality of garment pieces before sewing and sewing parts of…
Added 5 hours ago
concrete products machine operator
Béton Préfabriqué Fortier Inc.
Quebec, QC
Full-time
Added 12 hours ago
Principal Data Engineer - Canada
JobGet
Remote, Canada
$160,000 to $190,000 CAD / year
Full-time · Remote
Enable Machine Learning at Scale: Partner closely with Platform Engineers and Data Analysts to design feature stores, training data pipelines, and inference-ready datasets that power…
Added 12 hours ago
INDUSTRIAL MILLWRIGHT
City of Toronto
Toronto, ON
May be required to perform skilled machining work using lathe, milling machine, shaper, drill press and other machine tools.
Added 14 hours ago
Extrusion Operator
Polykar Inc.
Montreal, QC
Full-time
Reporting to the Production Department Manager, the extrusion operator will be responsible for managing the production of plastic rolls. They will be required to work efficiently as part of…
Added 16 hours ago
APA Operator
Pillar 5 Pharma inc.
Arnprior, ON
Full-time
Added 16 hours ago
Tablet /Capsule Operator
Pillar 5 Pharma inc.
Arnprior, ON
Up to $21.21 CAD / hour
Contract
Pillar5 Pharma Inc. is currently seeking a Tablet/ Capsule Operator to join our Solid Dose team.
Added 16 hours ago
Production Mechanic
Pillar 5 Pharma inc.
Arnprior, ON
Full-time
Helpassistwith operator training of mechanical equipment
Added 16 hours ago
Machine Operator
Galaxie Brands Corporation
ON
Up to $25 CAD / hour
Full-time
We are seeking a detail-oriented and reliable Machine Operators to join our cannabis manufacturing team in our new Aylmer, ON location.

Ring Container Technologies

Downstream Operator

Lethbridge, AB, Canada

Job type: Full-time
Posting language: English
Posted: May 22, 2026

Apply About employer

Applications open in a new tab.

Original job description

NIGHTSHIFT

Job Purpose

To operate Downstream production machinery safely and efficiently; maintain appropriate documentation and communicate ideas and problems to appropriate staff; perform scheduled preventative maintenance and downstream equipment changeovers; responsible for producing best quality product. In addition to the following duties, this position requires the employee to perform the responsibilities of the Production Associate.

Key Responsibilities and Duties

Ensure the safe and efficient operation of all downstream equipment to meet or exceed company established Overall Equipment Effectiveness (OEE) expectations and customer quality expectations.

Follow Lock out / Tag out policy.
Wear proper Personal Protective Equipment (PPE) when entering the production area.
Follow all Good Manufacturing Practices (GMP) when entering the production area.
Safe operation of all fire extinguishers.
Proactive in addressing unsafe conditions on production equipment.
Report all unsafe acts or conditions to Shift Production Supervisor immediately. Utility knifes will not be used on the production floor.
Participate in safety training as scheduled and provided by the company.
Obey all machine guards and safety warnings.

Responsible for producing and/or packing the best quality product at all times.

Ensure all production meets or exceed customer standards and expectations.
Ensure all production is properly labeled and/or tagged.
Ensure all non-conforming products are placed on hold with proper hold documentation completed.
Perform data collection of quality measurements as directed or when necessary.
Ensure all quality checks are properly completed and recorded in the NWA Quality Monitor or a plant specific form at the scheduled intervals.
Ensure all raw material lot numbers are properly obtained and recorded as required.
Communicate out of specification conditions to the appropriate personnel.

Perform scheduled Preventative Maintenance tasks as outlined by the plant PM program.

Proactive in addressing machine inefficiencies during preventative maintenance.
Ensure downstream equipment is clean and in ‘showroom condition’ after preventative maintenance is performed on production equipment.
Continually evaluate equipment for improvement areas. Tag components or parts that need repair, replacement or improvement as outlined in the Total Productive Manufacturing (TPM) guidelines.
Proactive in addressing housekeeping issues on the production floor and production equipment.

Perform scheduled downstream production equipment changeovers as outlined by the plant production schedule.

Perform downstream changeovers with limited downtime as described in Single Minute Exchange of Dies (SMED) procedures.
Ensure production equipment is in safe and efficient operation after each changeover.

Maintain sufficient records to support the Computerized Maintenance Management Software (CMMS) system – MicroMain.

Record parts removed from inventory on appropriate documentation to maintain sufficient parts inventory.
Notify Maintenance Manager when parts inventory becomes low or reaches a reorder point.
Complete the required paperwork and/or electronic data entry for all Micromain work orders.
Generate the necessary quick tickets when emergency repairs are required.

Coordinate with Production Manager as it relates to production equipment training and employee development.

Provide suggestions for training topics.
Complete any machine and task specific training in the described timeframe.

Communicate problems, progress reports and continuous improvement ideas to management staff, maintenance and production personnel. Promote and participate in good housekeeping habits to ensure plant appearance exceeds management and customer expectations.

Ensure all daily, weekly and periodic cleaning tasks are performed as outlined in the Master Cleaning Schedule.
Perform line sanitization tasks as outlined in the Master Sanitization Schedule and according to company procedures.
Maintain a clean work area at all times.
- Empty all garbage cans in work area at the conclusion of assigned shift.
- Sweep and/or mop production floor in work area.
- Clean equipment if it becomes dirty or stained during shift operation.
Proactive in addressing housekeeping issues on the production floor and production equipment.
Organize and maintain clean work stations.

Responsible for maintaining appropriate documentation during the shift.

Document machine or process changes.
Perform necessary downstream operator checklists.
Maintain accurate production reporting documentation.

Responsible for active participation on plant teams and activities including safety, quality, sustainability, community involvement, OEE, maintenance, employee wellness, brainstorming and continuous improvement which are required to create and maintain a World Class environment. Responsible for their personal development by establishing SMART goals, requesting regular meetings with their managers, volunteering for plant improvement teams, requesting additional training, requesting involvement beyond their immediate job responsibilities, seeking higher education opportunities including continuing education classes and meeting or exceeding their self development and performance goals.

Experience, Educational and Technical Qualifications

Our Downstream Operator should possess a sense of urgency, accountability, business ethics, professionalism, self-motivation and the desire and focus to improve the business.

High School diploma or GED equivalent is preferred and should successfully complete the entrance examinations and interviews.

Ring Container Technologies is an equal opportunity employer. It is the policy of Ring to apply recruiting, hiring, training, promotion, compensation and professional development practices without regard to actual or perceived race, color, religion, sex (including pregnancy, sexual orientation and gender identity), national origin, age (40 or older), disability or certain classifications based on genetic information.

Apply About employer

More about this job

Responsibilities

Operate downstream production machinery safely and efficiently while maintaining high quality standards and documentation. Perform scheduled preventative maintenance, equipment changeovers, and ensure adherence to safety and GMP protocols.

Requirements

A high school diploma or GED is preferred, along with the ability to pass entrance examinations and interviews. Candidates should demonstrate accountability, professionalism, and a focus on continuous business improvement.

Skills

Machine Operation
Preventative Maintenance
Quality Control
Lock Out Tag Out
Good Manufacturing Practices
OEE Optimization
SMED Procedures
TPM Guidelines
CMMS
Data Collection
Safety Compliance
Housekeeping

Benefits

Ongoing training
Opportunities for growth
Career track process
Work-life balance

Visa sponsorship

Not detected in the job text

Keywords

Downstream Operator
OEE
Lock Out Tag Out
PPE
GMP
Preventative Maintenance
TPM
SMED
CMMS
MicroMain
Quality Monitor
Sanitization
Manufacturing
Production Reporting
SMART Goals

Report this job