Jobs in Canada

25+ jobs

Email me new jobs Save this search

Added just now
WR
Physician Assistant/Clinical Assistant- Psychiatry- 20091954; 20091955; 20091956; 20091915; 20091917
Winnipeg Regional Health Authority (WRHA)
Winnipeg, MB
- Part-time
…Home of Winnipeg, Pan Am Clinic,River Park Gardens, Victoria General Hospital, WRHA Corporate Programs, WRHA Community Health Services. Consider this prior to applying for positions, as…
Added just now
WR
Physician Assistant/Clinical Assistant- Psychiatry- 20091957, 20091914, 20091916
Winnipeg Regional Health Authority (WRHA)
Winnipeg, MB
- Part-time
…Home of Winnipeg, Pan Am Clinic,River Park Gardens, Victoria General Hospital, WRHA Corporate Programs, WRHA Community Health Services. Consider this prior to applying for positions, as…
Added just now
WR
Physician Assistant/Clinical Assistant- Rapid Access Polyclinic Medicine- 20089774
Winnipeg Regional Health Authority (WRHA)
Winnipeg, MB
- Full-time
…Home of Winnipeg, Pan Am Clinic,River Park Gardens, Victoria General Hospital, WRHA Corporate Programs, WRHA Community Health Services. Consider this prior to applying for positions, as…
Added just now
WR
Physician Assistant/Clinical Assistant- Psychiatry- 20091951, 20091952, 20091953, 20091912, 20091913
Winnipeg Regional Health Authority (WRHA)
Winnipeg, MB
- Full-time
…Home of Winnipeg, Pan Am Clinic,River Park Gardens, Victoria General Hospital, WRHA Corporate Programs, WRHA Community Health Services. Consider this prior to applying for positions, as…
Added just now
CO
Radio Operator/Jailer, $32.69/hour
County of Kewaunee
Montreal, QC · Urban agglomeration of Montreal, QC
- Full-time
…officers. Alternate days are spent maintaining and conducting the general operation of our 22-bed…
Added just now
SH
Medical Device Reprocessing Technician - Repost
Shared Health-Soins Communs
Winnipeg, MB
- Full-time
…Clinic, Prairie Crocus Manor, River Park Gardens, Victoria General Hospital, WRHA corporate programs, and WRHA community health…
Added just now
SH
Patient Navigator (Nurse IV)
Shared Health-Soins Communs
Portage la Prairie, MB
- Full-time
Has a general knowledge /understanding of alternative therapies and complementary therapies (CAM) and the impact they have on cancer patients.
Added just now
SH
Clerk III - Health Information
Shared Health-Soins Communs
Brandon, MB
- Full-time
Added just now
UH
Registered Nurse - Brain Program - Inpatient Stroke Rehabilitation
University Health Network
Toronto, ON
- Part-time
…and more than 44,000 TeamUHN members, UHN consists of Toronto General Hospital, Toronto Western Hospital, Princess Margaret Cancer Centre, Toronto Rehabilitation Institute, The Michener…
Added just now
SH
Clinical Educator - Nurse IV
Shared Health-Soins Communs
Brandon, MB
- Full-time
Assess, plan, implement and evaluate the delivery of clinical education sessions (specific or general) for PMH, revising content as indicated.
Added just now
SH
Clerk III- HIS
Shared Health-Soins Communs
Brandon, MB
- Internship
Added just now
SH
Clerk III - Health Information
Shared Health-Soins Communs
Brandon, MB
- Internship
Added just now
SH
Health Care Aide - Cardiology Input Unit -5A/6A/PRU
Shared Health-Soins Communs
Winnipeg, MB
- Full-time
Under the general supervision of the Program Team Manager and a Registered Nurse (RN) or Registered Psychiatric Nurse (RPN), and while demonstrating a commitment to the Mission, Values and…
Added just now
UH
Registered Practical Nurse - Brain Program, Stroke
University Health Network
Toronto, ON
- Full-time
…and more than 44,000 TeamUHN members, UHN consists of Toronto General Hospital, Toronto Western Hospital, Princess Margaret Cancer Centre, Toronto Rehabilitation Institute, The Michener…
Added just now
SH
Nursing Assistant
Shared Health-Soins Communs
Winnipeg, MB
- Full-time
General skills and ability to perform all tasks and responsibilities relevant to the duties of the position.
Added just now
SH
Health Care Aide - St. Boniface Hospital
Shared Health-Soins Communs
Winnipeg, MB
- Full-time
Under the general supervision of the Program Team Manager and a Registered Nurse (RN) or Registered Psychiatric Nurse (RPN), and while demonstrating a commitment to the Mission, Values and…
Added just now
SH
Unit Assistant
Shared Health-Soins Communs
Winnipeg, MB
- Full-time
Under the general supervision of the Manager, Health Services, RN, RPN, and/or LPN, the Unit Assistant acts as a member of the health care team, assisting with patient care and providing…
Added just now
SH
Nursing Assistant
Shared Health-Soins Communs
Winnipeg, MB
- Full-time
General skills and ability to perform all tasks and responsibilities relevant to the duties of the position.
Added just now
SH
Health Care Aide - Cardiology Input Unit -5A/6A/PRU
Shared Health-Soins Communs
Winnipeg, MB
- Full-time
Under the general supervision of the Program Team Manager and a Registered Nurse (RN) or Registered Psychiatric Nurse (RPN), and while demonstrating a commitment to the Mission, Values and…
Added just now
SH
Health Care Aide - Cardiology Input Unit -5A/6A/PRU
Shared Health-Soins Communs
Winnipeg, MB
- Full-time
Under the general supervision of the Program Team Manager and a Registered Nurse (RN) or Registered Psychiatric Nurse (RPN), and while demonstrating a commitment to the Mission, Values and…
Added just now
SH
Health Care Aide - Cardiology Input Unit -5A/6A/PRU
Shared Health-Soins Communs
Winnipeg, MB
- Full-time
Under the general supervision of the Program Team Manager and a Registered Nurse (RN) or Registered Psychiatric Nurse (RPN), and while demonstrating a commitment to the Mission, Values and…
Added just now
SH
Unit Assistant
Shared Health-Soins Communs
Winnipeg, MB
- Full-time
Under the general supervision of the Manager, Health Services, RN, RPN, and/or LPN, the Unit Assistant acts as a member of the health care team, assisting with patient care and providing…
Added just now
SH
Unit Assistant
Shared Health-Soins Communs
Winnipeg, MB
- Full-time
Under the general supervision of the Manager, Health Services, RN, RPN, and/or LPN, the Unit Assistant acts as a member of the health care team, assisting with patient care and providing…
Added just now
SH
Unit Assistant
Shared Health-Soins Communs
Winnipeg, MB
- Full-time
Under the general supervision of the Manager, Health Services, RN, RPN, and/or LPN, the Unit Assistant acts as a member of the health care team, assisting with patient care and providing…
Added just now
SH
Unit Clerk
Shared Health-Soins Communs
Winnipeg, MB
- Full-time
Under the general supervision of the Manager Health Services and a Registered Nurse (RN) or Registered Psychiatric Nurse (RPN), and while demonstrating a commitment to the Mission, Values…

Samuel, Son & Co.

Continuous Improvement Process Engineer

Markham, ON, Canada

The expected compensation range for this position is $93,840-$105,030. · Full-time

Apply About employer

Applications open in a new tab.

Job details

Pay: The expected compensation range for this position is $93,840-$105,030.
Job type: Full-time
Apply by: Nov 28, 2026
Experience: Proven 2-3 years of Process Engineering experience preferably in Metal Tube, Aerospace or other related industry.
Posting language: English
Posted: Oct 29, 2026

Original job description

RESPONSIBILITIES AND PHILOSOPHY:
1. Operator Development and Empowerment
- Improve process yield, scrap, rework and manufacturing efficiency by analyzing the process and planning workflow, space requirements, and equipment layout. Coordinate input that may cross multiple teams or areas; make recommendations and implement changes.
- Responsible for maximizing the following: (1) Cost Effectiveness; (2) Scrap Reduction; (3)Overall Equipment Effectiveness (OEE); (4) Single Minute Exchange of Die (SMED); (5) Mill Uptime and (6)Reliability towards manufacturing flow, processes and equipment.
- Facilitates time studies, capacity analysis, space optimization, process lay-outs to support the vision of flow and optimize cost through driving process efficiencies and value stream improvements with the value stream.
- Assist in technical input to perform corrective actions using 8-D format, fault trees, cause & effect diagrams, 5 Whys, A3, Design of Experiment and other tools; and to communicate data internally and externally.
- Participates in the AS9100/ISO9001/IATF quality management system requirements Refine and enhance processes by applying continuous improvement and key Lean manufacturing/production principles and techniques to areas of production. Recommend product changes/improvements.
- Identify and implement solutions for issues relating to safety, quality, productivity, and cost reductions.
- Develop innovative solutions to complex manufacturing production problems through identification and implementation of advanced manufacturing processes including conducting process analysis, applying knowledge of product design and materials, and soliciting observations from the operators/production technicians.
- Prepare documentation for new manufacturing processes.
- Prepare reports summarizing analyzed process information and trends.
- Assure product and process quality by testing process capabilities and establishing standards to confirm and validate manufacturing process requirements.
- Determine root cause of failures using statistical methods (e.g., design of experiment, SPC) that may result in recommended changes in design, tolerances, or processing methods.
2. Active Gemba and Process Robustness
- Support the VSM, lead hands, operators and transactional support groups in recovery and preventive actions for rework, setup, and changeovers.
- Application of Lean Six Sigma Methodologies (DMAIC, DMADV)
- Use the necessary lean tools, supplies and guidance to improve effectiveness.
- Reinforce (1)5S; (2)Idea Management; (3)Time Studies, (4)Space optimization, (4)Kaizen, (5)Kanban, (6)Hoshin Kanri, (7)Poka-Yoke; (8) SIPOC; (9)SMED; (10)Obeya; (11)Leader Standard Work; (12)Gemba and (13)Value Stream Mapping.
- Collaborate with management to prioritize improvement efforts based on data, impact, and feasibility.
3. Behavioral and Process Analysis
- Use pain point logs, cause-and-effect diagrams, 5 Whys, and other Lean Six Sigma tools to identify root causes at the real place (Gemba).
- Application of Lean Six Sigma Methodologies (DMAIC, DMADV)
- Facilitation of (1)Project Drilldown Analysis; (2)Project Charters; (3)8D; (4)A3; (5)Kaizen
4. Analytical and Technical Responsibilities
- Collaborate with Management, Quality Assurance, Group Engineering, and other departments to execute and sustain improvements.
- Must be proficient in applications used for documentation and data analysis including but not limited to: Excel, Word, PowerPoint, Visio, Power BI, SQL, Tableau, Python, AutoCAD, Solid Works, Apollo
- Knowledge of JDE systems
5. Benchmarking & Standardization Framework
- Internal Benchmark: Observe and assist operators to identify real issues, wastes, constraints and root causes.
- Functional Benchmark: Research operational excellence relative to Process Engineering improvements across similar or divergent industries especially Tubing, Aerospace and Data Center.
6. Collaboration and Cross-Departmental Integration
- Partner with VSM, QA, CI, Maintenance to ensure equipment robustness and reduce operator struggles.
- Collaborate with Management and HR for alignment, morale, and training.
- Support business expansion by improving employee engagement, process capability, compliance, and reducing Cost of Poor Quality (COPQ).
7. Apply Frameworks for Lean Quick Wins
Apply the following mental frameworks in day-to-day improvement work:
- Empower operators to stop the process when issues occur. Build quality at the source by reacting immediately to defects instead of passing them downstream.
- Foster an environment where learning, feedback, and small daily improvements are celebrated. Encourage continuous experimentation and adaptation.
- Simplify complex concepts by explaining them in clear, everyday language. Use this method to teach operators and teams, ensuring true understanding.
8. Continuous Improvement Initiatives
- Actively participates in the 5S Big Clean-Up Activities and supports the ATC 5S Standardization.
- Reinforce Value Stream Mapping Activities by providing updated VSM cycle time, standard time, mapping, SIPOC analysis.
- Spearheads CI Projects related to Yield, Scrap, OEE, SMED, Mill Up-time Projects.
OBJECTIVES
- Communicate with the Value Stream Managers, operators, lead hands, and QA/QC to understand ongoing issues and goals.
- Engages in the ATC TIBS Meeting and challenges the team on the OFI’s in the metrices in the TIBS relative to Safety, Quality, Delivery and Cost.
- Conduct gemba walks to observe operations, identify wastes, and record improvement opportunities.
- Act on Lean Quick Wins opportunities that are low cost, low effort but high impact improvements.
- Reinforce and supports 5S standards at workstations. Provide operators with proper tools and supplies to optimize preparedness and effectiveness.
- Engage operators in quick 5–10 minute micro-learning moments to reinforce Lean principles.
- Provide support to maintenance when equipment issues impact robustness or productivity.
- Communicate process engineering improvement projects and status to management and relevant departments.
- Review log data and trends to identify recurring issues or variations.
- Meet with VSM, QA, Group Engineering, and Lean teams to align improvement priorities.
- Conduct Root Cause Analysis on one key recurring issue per week.
- Update Process Engineering KPI’s and reports related to Yield, Scrap, VSM, OEE, SMED, Mill Uptime
- Present a monthly improvement report summarizing: - Key projects completed or initiated (Refer to KPIs)
- Quantified waste reduction and process improvements

- Lead or co-lead a small-to-medium Lean improvement project with cross-functional collaboration.
- Conduct internal benchmarking reviews to compare process capability and performance.
- Review and refresh training content for learning sessions.
- Supports and evaluates 5S, Idea Management, Kaizen sustainability and corrective measures for drift.
- Report PE Metrices trends and process stability metrics to management.
- Perform gap analysis to document our current status versus past performance, enabling measurable progress tracking.
- Facilitate projects assigned by management, forming cross-functional teams of Yellow Belts and process owners to execute them collaboratively.
- Maintain continuous work to sustain all improvement initiatives and ensure gains are not lost.

JOB REQUIREMENTS:
- Bachelor’s degree in Industrial Engineering or a related Engineering field.
- Proven 2-3 years of Process Engineering experience preferably in Metal Tube, Aerospace or other related industry.
- Spearheads Yield, VSM, Rework, Time Study Analysis, SMED, OEE, Scrap & Space Optimization Projects
- Strong analytical and Problem-Solving skills utilizing Lean Six Sigma methodologies, 8D, 5 Why, Design of Experiment, etc.
- Knowledge of Lean, Six Sigma or other improvement methodologies. L6S GB or BB Certification.
- Data-driven mindset with proficiency in data analysis tools. Must be able to use Excel, Word, PowerPoint, Visio, Power BI, SQL, Tableau, Python, AutoCAD, Solid Works, Apollo
- Has working knowledge of engineering domain principles and techniques, product functionality, industry practices, regulations, and policies. General knowledge of other related engineering and technical areas and the ability to analyze complex technical issues Excellent communication and interpersonal skills, with a customer-focused mindset.
- Ability to work with general objectives regarding projects and team goals; applies judgment in selecting procedures and techniques that should be applied. Works collaboratively in a team environment.

HEALTH AND SAFETY:
- Demonstrates a positive attitude towards safety and models safety for other employees at all times.
- Understand that it is mandatory to use and/or wear all personal protective equipment provided by the Company.
- Reports all accidents, incidents and near misses and supports in determining corrective actions to eliminate workplace hazards.
- Practices safe work habits as detailed in Samuels/ATC’s safety policies, procedures, C.S.A and the Occupational Health & Safety Act of Ontario.
- Understands and completes necessary health & safety training through Samuel’s Safety Training program and ensures renewal training is completed as per company requirements.
This is for a current open position. AI is not used in the screening of candidate resumes.
The expected compensation range for this position is $93,840-$105,030. This range includes base pay and target variable pay. Actual compensation will depend on factors such as geographic location, skills, education, and experience. We also consider internal equity to ensure fair and consistent pay practices. This range reflects the expected full compensation range for the role; most offers will fall within the range and not at the maximum in order to allow for future growth.

Apply About employer

More about this job

Responsibilities

Improve manufacturing yield, quality, productivity, equipment effectiveness, and cost through Lean and Six Sigma methods, process analysis, and operator engagement. Lead and sustain cross-functional improvement projects, conduct root cause investigations and gemba walks, and report performance metrics and project results to management.

Requirements

Requires a bachelor’s degree in Industrial Engineering or a related engineering field and 2–3 years of process engineering experience, preferably in metal tubing, aerospace, or a related industry. Candidates should have strong analytical and communication skills, knowledge of Lean Six Sigma methods, and proficiency with data analysis and engineering tools; Green Belt or Black Belt certification is specified.

Skills

Continuous Improvement
Lean Manufacturing
Lean Six Sigma
Root Cause Analysis
Process Engineering
Process Optimization
Data Analysis
Statistical Process Control
Design of Experiments
Value Stream Mapping
Project Management
Time Studies
Capacity Analysis
Cross-Functional Collaboration
Safety and Quality Management
Operator Training

Visa sponsorship

Not detected in the job text

Keywords

Lean Six Sigma
DMAIC
DMADV
5S
Kaizen
Kanban
Hoshin Kanri
Poka-Yoke
SMED
Value Stream Mapping
OEE
8D
A3
5 Whys
Design of Experiments
Statistical Process Control
SIPOC
Root Cause Analysis
Excel
PowerPoint
Visio
Power BI
SQL
Tableau
Python
AutoCAD
SolidWorks
Apollo
JDE
AS9100

Report this job