Jobs in Canada

25+ jobs

Email me new jobs Save this search

Added 4 mins ago
ES
Maintenance Supervisor: Grounds & Fabric
Equans Services Canada & US
Surrey, BC
- Full-time
Equans designs, installs, and delivers customized solutions to improve its customers’ equipment, systems and technical processes and optimize their use in the context of their energy,…
Added 4 mins ago
HT
Test Engineering Technologist - Process Packaging
Husky Technologies
Bolton, ON
- Full-time
To accelerate time-to-market with effective solutions that keep our customers in the lead, we leverage a powerful risk prioritized product development process. The Test Engineering…
Added 4 mins ago
WN
Senior Mechanical Engineer
W3 North America
Toronto, ON · Greater Toronto and Hamilton Area, ON
- $140,000 to $160,000 CAD / year
- Full-time
Lead and mentor a small engineering team of 3 to 4 engineers, designers and application staff.
Added 4 mins ago
SC
OCS Specialist/ Engineer (Overhead Catenary System)
SYSTRA Canada
Toronto, ON
- Full-time
This is an engineering role responsible for overhead contact system (OCS) design and delivery for rail and transit infrastructure projects. The position operates within multidisciplinary…
Added 4 mins ago
NG
Process Engineer / Process Improver
NSG Group
Collingwood, ON
- Full-time
The Process Engineer is a key technical leader responsible for the optimization, standardization, and continuous improvement of manufacturing processes of a high-performance, 24/7…
Added 4 mins ago
ST
Manufacturing Engineer
Sinclair Technologies
Aurora, ON
- $50,000 to $80,000 CAD / year
- Full-time
…and related products. This role serves as the manufacturing engineering technical representative, partnering with Engineering, Production, Quality, Supply Chain, Product Management, and…
Added 4 mins ago
HT
Product Development Engineer
Husky Technologies
Bolton, ON
- Full-time
Our Development Engineering team is looking to hire an experienced Product Development Engineer. The successful candidate will lead the technical development of packaging products working…
Added 4 mins ago
HT
Designer, Development (Mechanical)
Husky Technologies
Bolton, ON
- Full-time
…passion of our people around the world and their desire to lead change. At the same time, we are not afraid to expect a lot and strive for leadership in all of our key markets. We are a…
Added 4 mins ago
HT
Mechanical Designer (Fluidpower)
Husky Technologies
Bolton, ON
- Full-time
Lead engineering design as part of the product development process by focusing on systems level and concept design. Translating product definition into high quality, reliable and…
Added 4 mins ago
FS
Logistics Lead
Fleet Space Technologies
ON · Ontario, Canada
- Full-time
We're looking for a bilingual (English and Spanish speaking) Logistics Lead, Americas to own how Fleet moves equipment across the region. You'll be our authority on international air…
Added 4 mins ago
I
Senior Technology Designer
Introba
Vancouver, BC
- Full-time
We are the curious. Problem solvers. Driven to unlock the potential in every system. Across five countries are 1,100 engineers, designers, and consultants collaborating to elevate the human…
Added 4 mins ago
NF
Maintenance Systems & Reliability Lead
Natural Factors
Coquitlam, BC
- Full-time
…excellence? We're looking for a Maintenance Systems & Reliability Lead to take ownership of our maintenance systems strategy, optimize CMMS effectiveness, and lead reliability initiatives…
Added 4 mins ago
HT
Designer, Development (Electrical)
Husky Technologies
Bolton, ON
- Full-time
Solve technical problems including conflicting requirements, system reliability, cost constraints, and manufacturability challenges
Added 4 mins ago
E
AI DevOps Specialist (AI Enablement & Secure DevOps)
Experis
Canada
- Contract
The AI DevOps Specialist is primarily responsible for the technical deployment, secure enablement, administration, and continuous optimization of the global HPS Artificial Intelligence (AI)…
Added 4 mins ago
PI
Product Manager – Quantum System
Photonic Inc.
Coquitlam, BC
- $140,800 to $193,600 CAD / year
- Full-time
Direct experience working with hardware engineering teams and defining clean, well-documented technical interfaces between system layers or subsystems.
Added 4 mins ago
C
Project Manager (Permanent)
CoreFactor
Toronto, ON
- Full-time
The Project Manager will be responsible for leading a large ADMS (Advanced Distribution Management System) implementation over the full project life cycle. They will provide leadership,…
Added 20 mins ago
A
Salesforce Devops Lead
ATB
Calgary, AB · Edmonton, AB
- Full-time
We are seeking an innovative, visionary, and highly autonomous Salesforce Devops Lead to join us as a key technical leader in guiding our engineering teams and establishing core platform…
Added 34 mins ago
AI
Account Manager
Accuenergy Inc.
Toronto, ON · Greater Toronto Area, Canada
- Full-time
Manufacturing or B2B technical product environment; familiarity with the rhythm of physical-product sales (lead times, master data, configured products, order-to-delivery sequencing).
Added 34 mins ago
LM
Senior Sustainment Engineer
Lockheed Martin
Halifax, NS
- $105,000 to $137,750 CAD / year
- Full-time
…customer or product requirements into solutions that acknowledge technical, schedule, and cost constraints. May serve as the point of contact for logistics with the customer and provide…
Added 34 mins ago
HT
Software Validation Technologist
Husky Technologies
Bolton, ON
- Full-time
…passion of our people around the world and their desire to lead change. At the same time, we are not afraid to expect a lot and strive for leadership in all of our key markets. We are a…
Added 34 mins ago
W
Scheduler
Webuild
Toronto, ON
- Full-time
Webuild is an international construction company of civil engineering pioneers who have been at the forefront of the construction business for 120 years. With over 92,000 employees…
Added 34 mins ago
W
Software Engineer - C++ / Python / Android / Java L1
Wipro
Ottawa, ON
- Full-time
…progression may include Software Engineer, Senior Software Engineer, Technical Lead, and Software Architect roles, based on performance and…
Added 34 mins ago
B
R&D Tax Client Delivery Manager
Boast
Montreal, QC
- Full-time
Experience in STEM or supporting technical, software, engineering, or innovation-focused organizations is considered a strong asset
Added 34 mins ago
S
Protocol Developer
Survalent
Toronto, ON · Greater Toronto Area, Canada
- Full-time
…and electric utility technology who enjoys solving complex technical challenges and turning requirements into reliable software…
Added 34 mins ago
WI
Lead Mechanical Engineer, Resources
WSP in Canada
Calgary, AB
- Full-time
Lead as a technical expert on mechanical and piping engineering packages for multidisciplinary mining and industrial projects across all phases - from conceptual studies to detailed…

Samuel, Son & Co.

Continuous Improvement Process Engineer

Markham, ON, Canada

The expected compensation range for this position is $93,840-$105,030. · Full-time

Apply About employer

Applications open in a new tab.

Job details

Pay: The expected compensation range for this position is $93,840-$105,030.
Job type: Full-time
Apply by: Nov 28, 2026
Experience: Proven 2-3 years of Process Engineering experience preferably in Metal Tube, Aerospace or other related industry.
Posting language: English
Posted: Oct 29, 2026

Original job description

RESPONSIBILITIES AND PHILOSOPHY:
1. Operator Development and Empowerment
- Improve process yield, scrap, rework and manufacturing efficiency by analyzing the process and planning workflow, space requirements, and equipment layout. Coordinate input that may cross multiple teams or areas; make recommendations and implement changes.
- Responsible for maximizing the following: (1) Cost Effectiveness; (2) Scrap Reduction; (3)Overall Equipment Effectiveness (OEE); (4) Single Minute Exchange of Die (SMED); (5) Mill Uptime and (6)Reliability towards manufacturing flow, processes and equipment.
- Facilitates time studies, capacity analysis, space optimization, process lay-outs to support the vision of flow and optimize cost through driving process efficiencies and value stream improvements with the value stream.
- Assist in technical input to perform corrective actions using 8-D format, fault trees, cause & effect diagrams, 5 Whys, A3, Design of Experiment and other tools; and to communicate data internally and externally.
- Participates in the AS9100/ISO9001/IATF quality management system requirements Refine and enhance processes by applying continuous improvement and key Lean manufacturing/production principles and techniques to areas of production. Recommend product changes/improvements.
- Identify and implement solutions for issues relating to safety, quality, productivity, and cost reductions.
- Develop innovative solutions to complex manufacturing production problems through identification and implementation of advanced manufacturing processes including conducting process analysis, applying knowledge of product design and materials, and soliciting observations from the operators/production technicians.
- Prepare documentation for new manufacturing processes.
- Prepare reports summarizing analyzed process information and trends.
- Assure product and process quality by testing process capabilities and establishing standards to confirm and validate manufacturing process requirements.
- Determine root cause of failures using statistical methods (e.g., design of experiment, SPC) that may result in recommended changes in design, tolerances, or processing methods.
2. Active Gemba and Process Robustness
- Support the VSM, lead hands, operators and transactional support groups in recovery and preventive actions for rework, setup, and changeovers.
- Application of Lean Six Sigma Methodologies (DMAIC, DMADV)
- Use the necessary lean tools, supplies and guidance to improve effectiveness.
- Reinforce (1)5S; (2)Idea Management; (3)Time Studies, (4)Space optimization, (4)Kaizen, (5)Kanban, (6)Hoshin Kanri, (7)Poka-Yoke; (8) SIPOC; (9)SMED; (10)Obeya; (11)Leader Standard Work; (12)Gemba and (13)Value Stream Mapping.
- Collaborate with management to prioritize improvement efforts based on data, impact, and feasibility.
3. Behavioral and Process Analysis
- Use pain point logs, cause-and-effect diagrams, 5 Whys, and other Lean Six Sigma tools to identify root causes at the real place (Gemba).
- Application of Lean Six Sigma Methodologies (DMAIC, DMADV)
- Facilitation of (1)Project Drilldown Analysis; (2)Project Charters; (3)8D; (4)A3; (5)Kaizen
4. Analytical and Technical Responsibilities
- Collaborate with Management, Quality Assurance, Group Engineering, and other departments to execute and sustain improvements.
- Must be proficient in applications used for documentation and data analysis including but not limited to: Excel, Word, PowerPoint, Visio, Power BI, SQL, Tableau, Python, AutoCAD, Solid Works, Apollo
- Knowledge of JDE systems
5. Benchmarking & Standardization Framework
- Internal Benchmark: Observe and assist operators to identify real issues, wastes, constraints and root causes.
- Functional Benchmark: Research operational excellence relative to Process Engineering improvements across similar or divergent industries especially Tubing, Aerospace and Data Center.
6. Collaboration and Cross-Departmental Integration
- Partner with VSM, QA, CI, Maintenance to ensure equipment robustness and reduce operator struggles.
- Collaborate with Management and HR for alignment, morale, and training.
- Support business expansion by improving employee engagement, process capability, compliance, and reducing Cost of Poor Quality (COPQ).
7. Apply Frameworks for Lean Quick Wins
Apply the following mental frameworks in day-to-day improvement work:
- Empower operators to stop the process when issues occur. Build quality at the source by reacting immediately to defects instead of passing them downstream.
- Foster an environment where learning, feedback, and small daily improvements are celebrated. Encourage continuous experimentation and adaptation.
- Simplify complex concepts by explaining them in clear, everyday language. Use this method to teach operators and teams, ensuring true understanding.
8. Continuous Improvement Initiatives
- Actively participates in the 5S Big Clean-Up Activities and supports the ATC 5S Standardization.
- Reinforce Value Stream Mapping Activities by providing updated VSM cycle time, standard time, mapping, SIPOC analysis.
- Spearheads CI Projects related to Yield, Scrap, OEE, SMED, Mill Up-time Projects.
OBJECTIVES
- Communicate with the Value Stream Managers, operators, lead hands, and QA/QC to understand ongoing issues and goals.
- Engages in the ATC TIBS Meeting and challenges the team on the OFI’s in the metrices in the TIBS relative to Safety, Quality, Delivery and Cost.
- Conduct gemba walks to observe operations, identify wastes, and record improvement opportunities.
- Act on Lean Quick Wins opportunities that are low cost, low effort but high impact improvements.
- Reinforce and supports 5S standards at workstations. Provide operators with proper tools and supplies to optimize preparedness and effectiveness.
- Engage operators in quick 5–10 minute micro-learning moments to reinforce Lean principles.
- Provide support to maintenance when equipment issues impact robustness or productivity.
- Communicate process engineering improvement projects and status to management and relevant departments.
- Review log data and trends to identify recurring issues or variations.
- Meet with VSM, QA, Group Engineering, and Lean teams to align improvement priorities.
- Conduct Root Cause Analysis on one key recurring issue per week.
- Update Process Engineering KPI’s and reports related to Yield, Scrap, VSM, OEE, SMED, Mill Uptime
- Present a monthly improvement report summarizing: - Key projects completed or initiated (Refer to KPIs)
- Quantified waste reduction and process improvements

- Lead or co-lead a small-to-medium Lean improvement project with cross-functional collaboration.
- Conduct internal benchmarking reviews to compare process capability and performance.
- Review and refresh training content for learning sessions.
- Supports and evaluates 5S, Idea Management, Kaizen sustainability and corrective measures for drift.
- Report PE Metrices trends and process stability metrics to management.
- Perform gap analysis to document our current status versus past performance, enabling measurable progress tracking.
- Facilitate projects assigned by management, forming cross-functional teams of Yellow Belts and process owners to execute them collaboratively.
- Maintain continuous work to sustain all improvement initiatives and ensure gains are not lost.

JOB REQUIREMENTS:
- Bachelor’s degree in Industrial Engineering or a related Engineering field.
- Proven 2-3 years of Process Engineering experience preferably in Metal Tube, Aerospace or other related industry.
- Spearheads Yield, VSM, Rework, Time Study Analysis, SMED, OEE, Scrap & Space Optimization Projects
- Strong analytical and Problem-Solving skills utilizing Lean Six Sigma methodologies, 8D, 5 Why, Design of Experiment, etc.
- Knowledge of Lean, Six Sigma or other improvement methodologies. L6S GB or BB Certification.
- Data-driven mindset with proficiency in data analysis tools. Must be able to use Excel, Word, PowerPoint, Visio, Power BI, SQL, Tableau, Python, AutoCAD, Solid Works, Apollo
- Has working knowledge of engineering domain principles and techniques, product functionality, industry practices, regulations, and policies. General knowledge of other related engineering and technical areas and the ability to analyze complex technical issues Excellent communication and interpersonal skills, with a customer-focused mindset.
- Ability to work with general objectives regarding projects and team goals; applies judgment in selecting procedures and techniques that should be applied. Works collaboratively in a team environment.

HEALTH AND SAFETY:
- Demonstrates a positive attitude towards safety and models safety for other employees at all times.
- Understand that it is mandatory to use and/or wear all personal protective equipment provided by the Company.
- Reports all accidents, incidents and near misses and supports in determining corrective actions to eliminate workplace hazards.
- Practices safe work habits as detailed in Samuels/ATC’s safety policies, procedures, C.S.A and the Occupational Health & Safety Act of Ontario.
- Understands and completes necessary health & safety training through Samuel’s Safety Training program and ensures renewal training is completed as per company requirements.
This is for a current open position. AI is not used in the screening of candidate resumes.
The expected compensation range for this position is $93,840-$105,030. This range includes base pay and target variable pay. Actual compensation will depend on factors such as geographic location, skills, education, and experience. We also consider internal equity to ensure fair and consistent pay practices. This range reflects the expected full compensation range for the role; most offers will fall within the range and not at the maximum in order to allow for future growth.

Apply About employer

More about this job

Responsibilities

Improve manufacturing yield, quality, productivity, equipment effectiveness, and cost through Lean and Six Sigma methods, process analysis, and operator engagement. Lead and sustain cross-functional improvement projects, conduct root cause investigations and gemba walks, and report performance metrics and project results to management.

Requirements

Requires a bachelor’s degree in Industrial Engineering or a related engineering field and 2–3 years of process engineering experience, preferably in metal tubing, aerospace, or a related industry. Candidates should have strong analytical and communication skills, knowledge of Lean Six Sigma methods, and proficiency with data analysis and engineering tools; Green Belt or Black Belt certification is specified.

Skills

Continuous Improvement
Lean Manufacturing
Lean Six Sigma
Root Cause Analysis
Process Engineering
Process Optimization
Data Analysis
Statistical Process Control
Design of Experiments
Value Stream Mapping
Project Management
Time Studies
Capacity Analysis
Cross-Functional Collaboration
Safety and Quality Management
Operator Training

Visa sponsorship

Not detected in the job text

Keywords

Lean Six Sigma
DMAIC
DMADV
5S
Kaizen
Kanban
Hoshin Kanri
Poka-Yoke
SMED
Value Stream Mapping
OEE
8D
A3
5 Whys
Design of Experiments
Statistical Process Control
SIPOC
Root Cause Analysis
Excel
PowerPoint
Visio
Power BI
SQL
Tableau
Python
AutoCAD
SolidWorks
Apollo
JDE
AS9100

Report this job