Find work in Canada.

332,349 jobs across our Canadian network. How we count

Jobs in Canada

25+ jobs

Email me new jobs Save this search

Added 3 mins ago
MG
Registered Practical Nurse (Withdrawal Management Centre)
Michael Garron Hospital
Toronto, ON
- Temporary
All employees of Michael Garron Hospital (MGH), a division of Toronto East Health Network (TEHN) [formerly Toronto East General Hospital (TEGH)] agree to work within the legislated…
Added 3 mins ago
A
General Labourer
Auxly
Staples
- $17.95 CAD / hour
- Internship
We’re looking for a motivated, detail-oriented General Labourer to join our team in Leamington, ON.
Added 3 mins ago
WC
General Labor
Wealthridge Construction Ltd.
Timmins, ON
- Full-time
Added 3 mins ago
SM
RQ11518 – Business Analyst – Senior
S M Software Solutions Inc
Toronto, ON
- Internship
Added 3 mins ago
SM
RQ11619 – Business Analyst – Senior
S M Software Solutions Inc
Toronto, ON
- Internship
Added 3 mins ago
SM
RQ11531 – Scrum Master – Intermediate
S M Software Solutions Inc
Toronto, ON
- Internship
Added 3 mins ago
SM
RQ11541 – UX Designer – Senior
S M Software Solutions Inc
Toronto, ON
- Internship
Added 3 mins ago
S
Business Consultant
Swoon
Toronto, ON
- $40 to $52 CAD / hour
- Contract
Added 3 mins ago
SM
Clinical Assistant General Internal Medicine
St. Michael's Hospital
Toronto, ON
- Part-time
Recent experience within a General Internal Medicine unit preferred
Added 3 mins ago
SM
RQ11612 – Business Analyst – Senior
S M Software Solutions Inc
Toronto, ON
- Internship
Added 3 mins ago
SM
RQ10989 – Business Architect – Senior
S M Software Solutions Inc
Toronto, ON
- Full-time
Added 3 mins ago
SM
RQ11622 – Systems Testing/QA Specialist – Senior
S M Software Solutions Inc
Toronto, ON
- Internship
Added 3 mins ago
CL
General Manager - Secure Destruction Recycling Facility
Clean Lifecycle Network (CLN)
Canada
- Full-time
CLN is seeking an experienced General Manager to lead the day-to-day operation of a secure destruction and materials recovery facility in Ancaster (Hamilton), Ontario. This is a hands-on,…
Added 3 mins ago
A
Medical Office Receptionist
Adecco
Toronto, ON
- Temporary
Added 3 mins ago
NS
2627-202 - Administrative Assistant (OA11) - Pictou Campus
Nova Scotia Community College - NSCC
Stellarton, NS
- Full-time
Provide supportive coverage for all administrative tasks such as filing, booking appointments, attending meetings and general office support as needed.
Added 3 mins ago
S
Materials Engineering Technologist
SGS
Calgary, AB
- $31 to $41 CAD / hour
- Full-time
…statement of duties, responsibilities, or requirements, but a general description of the job. Nothing contained herein restricts the company's rights to assign or reassign duties and…
Added 3 mins ago
NS
2627-200 - Faculty, Related Subjects - Burridge Campus
Nova Scotia Community College - NSCC
Yarmouth Indian Reserve No. 33, NS · Yarmouth, NS
- Temporary
You have a minimum of five years (full-time equivalent) of recent and related occupational experience and knowledge in general Trades and Transportation practices, specifically in…
Added 3 mins ago
SM
RQ11539 – UX Designer – Senior
S M Software Solutions Inc
Toronto, ON
- Internship
Added 3 mins ago
SM
RQ11538 – UX Designer – Senior
S M Software Solutions Inc
Toronto, ON
- Internship
Added 3 mins ago
OH
Care Coordinator, Regular Full Time, Western Champlain, Renfrew
Ontario Health atHome
Renfrew, ON
- Full-time
Under the general direction of the Manager, Patient Services, the Care Coordinator is responsible for managing a caseload of diverse patients who are living and/or dealing with a variety of…
Added 3 mins ago
CP
Private Wealth Manager/Portfolio Manager
Cardinal Point Wealth Management, ULC
Toronto, ON
- Full-time
Added 3 mins ago
CP
Manager, Tax (Cross-Border)
Cardinal Point Wealth Management, ULC
Toronto, ON
- Full-time
Added 3 mins ago
OH
Bilingual Care Coordinator, Regular Full-Time, Congregate Care Team East, Labelle
Ontario Health atHome
Ottawa, ON
- Full-time
Under the general direction of the Manager, Patient Services, the Care Coordinator acts as a single point of contact to improve collaboration and communication in congregate settings,…
Added 3 mins ago
DC
Spécialiste technique, Gestion des projets
Defence Construction Canada
Ottawa, ON
- Full-time
Added 3 mins ago
OH
Care Coordinator, Temporary Full Time, Western Ottawa, Bells Corners
Ontario Health atHome
Ottawa, ON
- Full-time
Under the general direction of the Manager, Patient Services, the Care Coordinator is responsible for managing a caseload of diverse patients who are living and/or dealing with a variety of…

Smiths Group

CNC Machinist (Rotating Shift)

Hamilton, ON, Canada

$65,000 to $82,000 CAD / year · Full-time

Apply About employer

Applications open in a new tab.

Job details

Pay: $65,000 to $82,000 CAD / year
Job type: Full-time
Experience: Requires over 5 years of experience in related or subordinate work, plus 6 months on the job training.
Posting language: English
Posted: Oct 6, 2026

Original job description

Company Description

John Crane, a business of Smiths Group, is a global leader in mission-critical flow control solutions for energy and process industries that enable efficient and sustainable operations. Our products include mechanical seals and systems, couplings, bearings, filtration systems, and predictive digital monitoring technologies.

We have a global network of more than 200 sites in over 50 countries and employ more than 6,000 people worldwide. We partner with our customers to help them keep their operations safe, reduce downtime, improve efficiency, and meet the latest environmental standards.

John Crane is part of Smiths Group. For over 170 years, Smiths has been pioneering progress by engineering for a better future. We serve millions of people every year, helping to create a safer, more efficient, productive, and better-connected world across four global markets: energy, security & defence, space & aerospace, and general industrial. Listed on the London Stock Exchange, Smiths employs approximately 16,000 colleagues in over 50 countries.

Job Description

SUMMARY OF ESSENTIAL FUNCTIONS:

The CNC Machinist will perform and record manufacturing activities consistent with those required to meet company objectives. Must be able to handle multiple concurrent tasks with fluctuating priorities. Sets up and operates CNC Milling or Turning machines to manufacture precision components. Capable of operating manual lathes and mills. Familiar with operations like drilling, tapping, threading, turning, reaming, boring, facing and other machining operations performed on C.N.C. equipment. Able to modify or edit existing programs.

SPECIFIC DUTIES, ACTIVITIES AND RESPONSIBILITIES INCLUDE BUT ARE NOT LIMITED TO:

Set up, operate, and run CNC Mills and/or CNC Turning Centers.
Interpret engineering drawings, blueprints, and work instructions.
Understand and apply GD&T, tolerances, product features, and dimensional requirements.
Perform machine setups including tooling, offsets, and fixture alignment.
Notifies supervisor of shop and tooling requirements.
Operates C.N.C machines as assigned and may be required to operate more than one machine simultaneously.
Follows preventative maintenance procedures as outlined by machine manufacturers or supervisors.
Required to assist in machine repair when needed.
Keeps machine and work area safe, clean, lubricated and orderly.
Keeps accurate time reporting on all activities.
Remains aware and follows all health and safety practices. Works in a safe fashion and reports any concerns to supervisor.
Trains and assists other CNC set up Operators.
Utilizes knowledge of working properties for a wide variety of materials such as aluminum, brass, cast iron, alloy steels, plastics, etc.
Pre-sets tools and addresses tool off-sets prior to finishing cuts.
Uses measuring instruments such as micrometres, vernier, calliper, CMM, etc. to verify conformance to specifications.
Works to required tolerances and is responsible for quality of work produced.
May be required to assist in machine repair.
Required to make edits to programs.
Report all opportunities for continuous improvement.
Utilizes knowledge of shop mathematics, charts and tables.
Performs other duties as assigned utilizing normal skill and ability of the current position.
Take part in training for new skills.

Qualifications

High school education plus 2 years technical training.
Strong knowledge and hands-on experience with CNC milling or turning operations.
Requires over 5 years of experience in related or subordinate work, plus 6 months on the job training.
Proficient in reading blueprints and understanding tolerances and dimensions.
Familiarity with G-code programming and CNC machine controls.
Strong attention to detail and commitment to quality.
Experience with Mazak (Mill-Turn), Okuma, and Haas machines an asset.
CNC programming experience (at the machine or offline) an asset.
Experience in precision component manufacturing.
Red Seal or equal experience
Proficient on operating manual lathes and mills

PHYSICAL/MENTAL REQUIREMENTS:

Must be able to sit for extended periods of time; a minimum of 2 hours.
Must be able to maneuver to all areas of the office, shop, warehouse, or manufacturing plant.
Must be able to lift up to 35 pounds.
Must be able to bend, reach, kneel, twist, and grip items while working at assigned desk area.
Must have manual dexterity and coordination to operate office equipment.
Must be able to simultaneously manage several objectives, changing priorities and reassign priorities to complete assignments.
Must be able to read, write, speak and understand English.
Must be able to respond to visual and aural cues.

WORK ENVIRONMENT:

Work environment is considered only within the Stoney Creek location on a 2-shift operation in a manufacturing plant.

The noise level in the work environment is usually loud and approved PPE is required when on the factory floor.

COMPENSATION & BENEFITS:

Competitive starting wage with increases after 3, 6, 9 and 12 months.
Shift premiums of an additional $1.25 hour on the afternoon shift
100% Employer paid benefits
Excellent Health & Dental coverage
8.25% Employer Pension contributions with an additional optional 1% match

ROTATING SHIFT: Every 2 weeks (Monday-Friday: 7:00 am - 3:00 pm / 3:00 pm - 11:00 pm)

Additional Information

With colleagues stretching across the globe, we are proud of our diversity. To foster inclusivity, we run employee resource groups (ERGs) to provide a safe space for employees to connect and support each other. Our cross-business ERGs include Veterans, Pride Network, Black Employee Network, Women@Work Network, and Neurodiversity.

Across our company, we recognize excellence, culminating in the Smiths Excellence Awards, our annual celebration of the most extraordinary activities, people, and projects that best showcase our strengths and help drive our business forward. We announce these on our annual Smiths Day, a global celebration of Smiths around our network.

Join us for a great career with competitive compensation and benefits, while helping engineer a better future.

We believe that different perspectives and backgrounds are what make a company flourish. All qualified applicants will receive equal consideration for employment regardless of color, religion, sex, sexual orientation, gender identity, national origin, economic status, disability, age, or any other legally protected characteristics. We are proud to be an inclusive company with values grounded in equality and ethics, where we celebrate, support, and embrace diversity.

At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation – including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career’s website (Careers - Smiths Group plc)

Grade: 08

Employee Group: Permanent

Global Region: North America

Compensation: CAD 65000 - CAD 82000 - yearly

Apply About employer

More about this job

Responsibilities

The CNC Machinist will set up and operate CNC milling and turning machines to manufacture precision components according to engineering drawings. They are responsible for performing machine maintenance, ensuring quality standards, and assisting in the training of other operators.

Requirements

Candidates must have a high school education plus two years of technical training and over five years of relevant experience. Proficiency in reading blueprints, understanding GD&T, and operating manual and CNC machinery is required.

Skills

CNC milling
CNC turning
Blueprint reading
GD&T
G-code programming
Manual lathe operation
Manual mill operation
Precision component manufacturing
Tooling setup
Machine maintenance
Measuring instruments
Shop mathematics
Quality control
Mazak
Okuma
Haas

Benefits

Health insurance
Dental coverage
Pension contributions
Shift premiums

Visa sponsorship

Not detected in the job text

Keywords

CNC Machinist
Manufacturing
Mechanical seals
Flow control
GD&T
Blueprints
Mazak
Okuma
Haas
G-code
Precision components
Tooling
Micrometers
Vernier
CMM
Preventative maintenance
Shop mathematics
Rotating shift
Stoney Creek
Smiths Group
John Crane
Engineering
Industrial
Quality assurance
Machine setup
Drilling
Tapping
Threading
Turning
Boring

Report this job