Jobs in Canada

25+ jobs

Group jobs by employerEmail me new jobs Save this search

Added 3 mins ago
UM
Production Technician (Night Shift)
Ultra Maritime
Dartmouth, NS
- Full-time
Ultra Maritime is seeking highly motivated and skilled Night Shift Production Technician to join our team
Added 3 mins ago
Team Member
Hollywood Bowl Group
Guelph, ON
Ensure work areas remain clean, empty trash and spot sweeps whenever floor needs it, or when requested by a manager; Exceed Splitsville’s cleanliness standards.
Added 3 mins ago
TS
Assistant Store Manager
The Salvation Army Canada and Bermuda Territory
Toronto, ON · East York Thrift Store
- Full-time
Oversee safety of all customers, staff, and volunteers while in the store
Added 3 mins ago
TS
Street Outreach Worker
The Salvation Army Canada and Bermuda Territory
Ottawa, ON
- Part-time
· Provide Interim case management of those on the prioritization list that score moderate and high acuity until matched with a Housing Based Case Manager
Added 3 mins ago
Territory Manager
Vestis Uniforms and Workplace Supplies | Canadian Linen & Uniform Service | Québec Linge Service D’Uniformes
Toronto, ON · Etobicoke, ON
Canadian Linen and Uniform Services Company is looking for an experienced Route Manager/Customer Service Manager who will be responsible for the overall daily supervision of driver’s on…
Added 3 mins ago
SC
General Manager, Food & Nutrition Services | Seniors' Living & Long-Term Care (81357001)
Sodexo Canada Ltd
Scarborough Bluffs Park, ON · Scarborough, Ontario
- Full-time
Canadian Society of Nutrition Management (CSNM) Certification is required
Added 3 mins ago
JC
Operations Manager
JYSK Canada
Orleans, ON · Ottawa, Ontario
- $50,000 to $55,000 CAD / year
- Full-time
As the Operations Manager you will be responsible for protecting JYSK’s assets and minimizing losses though effective execution of loss prevention policies and procedures in store. You will…
Added 3 mins ago
DIETARY AIDE
Southbridge Healthcare LP
Newmarket, ON
Schedule: day shifts (11:00am-7:00pm) Fridays, Tuesday and Rotational Saturdays and Sundays
Added 3 mins ago
Executive Assistant to Health
Musqueam Indian Band
Vancouver, BC
…similar administration office role to senior administrative manager or elected Council; or an equivalent combination of skill, knowledge, and…
Added 3 mins ago
Shft Mgr, Cage-GCT (12 Month Contract)
Great Canadian Entertainment
Toronto, ON · Etobicoke, ON
Under the direction of the Cage Manager, this position is responsible for the overall management of cage & coin operations at the site level. This position will be responsible for ensuring…
Added 3 mins ago
GC
Part-time Cage & Coin- Casino Mohawk
Great Canadian Entertainment
Milton, ON
- Part-time
Under the direct supervision of the Operations Manager, this position will demonstrate exceptional customer service, while accurately managing the care, control, transfer and balancing of…
Added 3 mins ago
GC
Part-time Security Officer- Casino Mohawk
Great Canadian Entertainment
Milton, ON
- Part-time
Under the direct supervision of the Manager, Security, this position is responsible for the safety and protection of team members, guests, the facility (both internal and external) and the…
Added 3 mins ago
CI
Supervisor (Part Time)
Carters Inc.
Newmarket, ON
- Part-time
Offer consistent, in the moment feedback to store team and raise performance concerns to Store Manager
Added 3 mins ago
PA
Body Shop Technician (Performance Collision Brampton)
Performance Auto Group
Brampton, ON
- Full-time
Must have a valid Ontario Driver's License and good driving record
Added 3 mins ago
BP
Gun Vault Specialist
Bass Pro Shops
Ottawa, ON
- Full-time
Support the manager in developing a cohesive team, motivating, engaging, coaching, and training fellow employees
Added 3 mins ago
TH
Overnight Freight Associate Full Time (SYDNEY)
The Home Depot
Sydney Indian Reserve No. 28A, NS
- Full-time
Follows all Safety and Loss Prevention Policies and Procedures.
Added 3 mins ago
PP
RTA - Perm PT - Sprucewood Place, Edmonton
Park Place Seniors Living
Edmonton, AB
- Part-time
REPORTS TO: Recreation Manager and Recreation Therapists
Added 3 mins ago
TH
Cashier Part Time (SYDNEY)
The Home Depot
Sydney Indian Reserve No. 28A, NS
- Part-time
Maintains Safety, Security and Shrink Mitigation
Added 3 mins ago
TH
Seasonal/Garden Sales Full Time - TORONTO YORKDALE
The Home Depot
Canada
- Full-time
Follows all safety policies and procedures, Loss Prevention policies and procedures
Added 3 mins ago
TU
Programmer Analyst II
The University of British Columbia
Vancouver, BC
- $8,554.25 to $13,340.92 CAD / month
- Full-time
Reports to the Senior Manager, Solutions Security and Architecture. Works independently and jointly within the Solutions Security and Architecture team to deliver software projects and…
Added 3 mins ago
TU
Utilities Electrical Engineer
The University of British Columbia
Vancouver, BC
- $10,459.67 to $15,675.58 CAD / month
- Full-time
The position manages professional staff and consultants and the UEE works very closely with the Manager, Electrical Utilities (including coverage in their absences), as well as Assistant…
Added 3 mins ago
TS
Housekeeper
The Salvation Army in Canada
Toronto, ON
- Part-time
Report infestations immediately to the Housekeeping/Janitorial Supervisor or Property Manager according to policies and procedures
Added 3 mins ago
GF
Service Manager - InnoServ
Gordon Food Service - Canada
Calgary, AB
- Full-time
Must have excellent interpersonal, organizational, communication skills, both written and verbal · Must have the ability to multi-task and work well under pressure
Added 3 mins ago
TH
Lot Associate Part Time - 7245 Regina Northwest
The Home Depot Canada
Regina, SK
- Part-time
Follows all Safety and Loss Prevention policies and procedures.
Added 3 mins ago
TH
Overnight Freight Associate Full Time - 7038 Brandon
The Home Depot Canada
Brandon, MB
- Full-time
Follows all Safety and Loss Prevention Policies and Procedures.

SPM Automation

Senior Mechanical Designer

Windsor, ON, N9G 0C4, Canada

Full-time

Apply on spmautomation.applytojob.com About employer

Applications open in a new tab.

Job details

Job type: Full-time
Apply by: Feb 8, 2027
Posting language: English
Posted: Nov 10, 2026

Original job description

Senior Mechanical Designer

About SPM Automation

SPM Automation develops advanced plastic joining and custom automation solutions for leading global manufacturers. Proudly based in Windsor, Ontario, our expertise spans laser, infrared, hot plate, vibration, and ultrasonic welding bringing together applied science, machine design, and intelligent controls to solve demanding production challenges for customers around the world.

We build more than machines - we build long-term customer partnerships. By working closely with customers to understand their products, processes, and goals, we turn complex manufacturing problems into practical innovations that improve quality, productivity, and reliability.

At SPM, you can make a direct contribution and see the results. Our researchers, designers, controls specialists, and machine builders work side by side, connecting ideas and engineering decisions to equipment on the shop floor and performance in customers’ facilities.

As we grow, we are investing in our people and strengthening how we work by sharing knowledge, developing technical capability, and continuously improving our processes. We are looking for people who take pride in their craft, bring curiosity to difficult problems, and want to help customers and teammates succeed.

The Opportunity

Design it. See it built. Help make it better.

We are seeking a Senior Mechanical Designer who wants to own the outcome - not just complete the design.

You will lead the mechanical design of plastic welding machines and industrial automation equipment within agreed customer requirements, project scope, schedules, and engineering-hour budgets. Your involvement will extend from machine concepts and customer reviews through detailed design, assembly support, debugging, and equipment validation.

Working directly with engineering colleagues and the technicians building the equipment, you will turn design concepts into practical, reliable machines. You will also provide project-level design leadership, mentor colleagues, and help improve the tools and processes we use from one project to the next.

This full-time, on-site position is based in Windsor, Ontario, and reports to the Mechanical Engineering Manager. The role provides technical and project leadership but has no direct reports.

See Our Work

Laser-Focused on Innovation - Design Engineering
https://www.design-engineering.com/features/laser-focused-on-innovation/

Festo & SPM Automation: Designing Smarter Production Together
https://www.youtube.com/watch?v=M2p4RkEMB3Q

Key Responsibilities

Machine Design and Technical Ownership

Develop machine concepts, layouts, and operating sequences based on customer specifications, process requirements, and project scope.

Use SolidWorks to develop complete 3D models, assemblies, engineering drawings, and equipment plans, including associated tooling, processing units, fixtures, and end-of-arm tooling.

Establish technical design objectives and priorities within the direction provided by the Mechanical Engineering Manager.

Develop safe, practical, manufacturable, and serviceable designs supported by appropriate mechanical calculations, component selection, material selection, and tolerance assessments.

Coordinate mechanical interfaces with electrical, controls, pneumatic, and process requirements.

Review and check engineering drawings for accuracy, completeness, and compliance with project requirements before submission for approval.

Create, review, and maintain accurate bills of materials for purchasing and production.

Maintain controlled drawings, design revisions, and supporting technical documentation.

Project Execution and Design Quality

Complete assigned designs within specified project timelines and budgeted engineering hours.

Monitor design progress and communicate technical risks, scope changes, resource requirements, and potential delays early.

Work with Project Management to develop and present machine concepts to customers for review and approval.

Participate in structured design reviews to confirm requirements and resolve risks before design release.

Apply design-for-manufacture and assembly principles to improve equipment quality, accessibility, reliability, and cost.

Work directly with mechanical and electrical technicians to ensure equipment quality, functionality, and constructability.

Resolve design-related issues during assembly, debugging, and validation, and support customer acceptance and installation activities as required.

Capture lessons learned and incorporate improvements into future designs and reusable machine modules.

Technical Leadership and Continuous Improvement

Provide design direction, support, and guidance to team members involved in assigned projects.

Coordinate and review team members’ design work, monitoring progress against project milestones and escalating issues to the Engineering Manager.

Mentor designers through constructive reviews, practical problem solving, and knowledge sharing.

Document design intent and help maintain consistent design practices across the team.

Use and help develop AI-assisted tools and workflows to improve documentation, knowledge sharing, design consistency, and repetitive engineering tasks.

Collaborate with process and controls specialists on equipment and customer-facing improvements, including AI-enabled features where relevant.

Use approved AI tools responsibly, protect company and customer information, and verify outputs before relying on them for engineering decisions.

Qualifications and Experience

Required

Bachelor’s degree in engineering or an engineering technology diploma from an accredited university or college.

At least five years of relevant industry experience with substantial mechanical design experience in industrial production equipment, custom automation, or special-purpose machinery.

Demonstrated ability to lead the design of complete machines or substantial machine systems from concept through detailed design and build support.

Strong proficiency in SolidWorks, including complex assemblies, detailed drawings, and bill-of-materials development.

Strong computer, mathematical, and mechanical problem-solving skills, including engineering calculations, component selection, and tolerancing.

Good working knowledge of applicable industry and engineering standards and machinery-safety requirements.

Strong understanding of engineering materials, their applications, and relevant manufacturing processes.

Ability to manage competing priorities and deliver accurate work within demanding project schedules and engineering-hour budgets.

Strong communication and organizational skills, with the ability to explain design decisions and collaborate effectively with customers and technical teams.

Demonstrated curiosity and initiative in applying AI and digital tools, with the ability to evaluate their outputs critically.

Willingness and ability to travel within Canada and the United States.

Preferred

Experience designing plastic welding equipment or tooling for laser, infrared, hot plate, vibration, or ultrasonic processes.

Experience with pneumatic systems, servo-driven mechanisms, and automated assembly equipment.

Experience supporting equipment debugging, customer acceptance testing, or installation.

Experience mentoring designers and coordinating project-level mechanical design activities.

Experience with AI-assisted workflows, scripting, CAD automation, or low-code tools.

What Success Looks Like

During your first year, you will be expected to:

Independently lead assigned mechanical design packages from concept through release and build support.

Deliver designs that meet customer specifications, agreed schedules, and engineering-hour budgets.

Identify and resolve technical risks before they become assembly or commissioning problems.

Produce accurate, checked drawings, bills of materials, and supporting documentation.

Provide effective technical guidance and help team members meet project milestones.

Contribute reusable designs, documented lessons learned, and practical workflow improvements, including appropriate AI-assisted tools.

Why Join SPM?

Complete-project involvement: See your work progress from an initial concept to functioning equipment.

Direct technical impact: Work closely with customers and build teams, with a clear connection between your decisions and equipment performance.

Canadian roots, global reach: Build your career in Windsor while contributing to projects for international manufacturers.

Collaborative technical teams: Work alongside experienced researchers, designers, controls specialists, and machine builders.

Professional growth: Expand your technical leadership, mentor colleagues, and deepen your knowledge across automation and joining technologies.

Opportunity to improve: Help strengthen design standards, reusable solutions, and project-execution practices as SPM grows.

Position Details

Employment: Full-time, on-site
Reporting to: Mechanical Engineering Manager

****

We welcome applications from qualified candidates of all backgrounds and value the different perspectives and experiences they bring.

Accommodations for applicants with disabilities are available on request throughout the recruitment and selection process.

Candidates must be legally entitled to work in Canada by their employment start date.

Please apply through the application link provided.

Do not include confidential information or proprietary materials belonging to a current or former employer.

Apply on spmautomation.applytojob.com About employer

More about this job

Responsibilities

Lead the mechanical design of plastic welding machines and industrial automation equipment from concept through to assembly and validation. Provide project-level design leadership, mentor colleagues, and collaborate with cross-functional teams to ensure high-quality, manufacturable solutions.

Requirements

Requires a bachelor's degree in engineering or an engineering technology diploma and at least five years of relevant industry experience. Candidates must demonstrate strong proficiency in SolidWorks and the ability to manage complex mechanical design projects within budget and schedule constraints.

Skills

Mechanical design
SolidWorks
Industrial automation
Machine design
3D modeling
Engineering drawings
Bill of materials
Tolerance assessment
Pneumatic systems
Servo-driven mechanisms
Project leadership
Technical documentation
Design for manufacture
Debugging
Equipment validation
Mentoring

Visa sponsorship

Not detected in the job text

Keywords

Mechanical Designer
Automation
SolidWorks
Plastic welding
Industrial equipment
Machine design
3D modeling
Engineering
Manufacturing
Project management
Pneumatics
Servo systems
Design for manufacture
Tolerance analysis
Technical leadership
AI-assisted tools
CAD
Bill of materials
Debugging
Validation
Mechanical calculations
Machine safety
Tooling
Fixtures
End-of-arm tooling
Process engineering
Controls
Documentation
Mentorship
Innovation

Report this job

Work requirements

Jobs in Canada