Jobs in Canada

25+ jobs

Group jobs by employerEmail me new jobs Save this search

Added 4 mins ago
UM
Production Technician (Night Shift)
Ultra Maritime
Dartmouth, NS
- Full-time
Ultra Maritime is seeking highly motivated and skilled Night Shift Production Technician to join our team
Added 4 mins ago
SH
Solution Engineer
Siemens Healthineers
Ottawa, ON · YOW B
- Full-time
Under the supervision of the Manager, Mechanical Process Engineering; the Solution Engineer is responsible for developing and executing process improvements and for generating and…
Added 4 mins ago
TS
Assistant Store Manager
The Salvation Army Canada and Bermuda Territory
Toronto, ON · East York Thrift Store
- Full-time
Support the Store manager/Corps Officer in ensuring all cash operations are carried out according to Salvation Army Policy and Procedures and nightly deposits are secure
Added 4 mins ago
TS
Street Outreach Worker
The Salvation Army Canada and Bermuda Territory
Ottawa, ON
- Part-time
· Provide Interim case management of those on the prioritization list that score moderate and high acuity until matched with a Housing Based Case Manager
Added 4 mins ago
Communications Specialist (FT)
Catholic Social Services
Edmonton, AB
…visibility and engagement. This multi-faceted role reports to the Manager, Communications & Event and contributes to the overall work of the Development and Community Relations…
Added 4 mins ago
PA
Body Shop Technician (Performance Collision Brampton)
Performance Auto Group
Brampton, ON
- Full-time
Must have a valid Ontario Driver's License and good driving record
Added 4 mins ago
Senior Analyst, Lending Business Technology
BMO
Toronto, ON · YNG
Communicate technical or system information in clear, business-friendly language.
Added 4 mins ago
B
Customer Service Representative
BMO
Sydney, NS
- Part-time
Added 4 mins ago
B
Distribution Intern, GAM, Winter 2027 (Co-op/Internship) - 4 months
BMO
Toronto, ON · FCP
- Full-time
…customers reach theirs. From in-depth training and coaching, to manager support and network-building opportunities, we’ll help you gain valuable experience, and broaden your…
Added 4 mins ago
M
Director, Marketing Analytics
Marketbridge
Remote, Canada
- Full-time
- Remote
Success in this role requires strong analytical judgment, technical fluency, curiosity, collaborative problem-solving, and a demonstrated ability to use AI and automation to improve the…
Added 4 mins ago
M
Analyst, Marketing Analytics
Marketbridge
Remote, Canada
- Full-time
- Remote
Build technical skills through hands-on project work, feedback, and relevant training or certifications in analytics, tagging, visualization, and marketing platforms.
Added 4 mins ago
S
Digital & Telecom System Architect
Scalian
Montreal, QC
- Full-time
Translate system and customer requirements into detailed technical solutions
Added 4 mins ago
TU
Programmer Analyst II
The University of British Columbia
Vancouver, BC
- $8,554.25 to $13,340.92 CAD / month
- Full-time
Reports to the Senior Manager, Solutions Security and Architecture. Works independently and jointly within the Solutions Security and Architecture team to deliver software projects and…
Added 4 mins ago
TU
Utilities Electrical Engineer
The University of British Columbia
Vancouver, BC
- $10,459.67 to $15,675.58 CAD / month
- Full-time
The Utilities Electrical Engineer reports to the Manager, Electrical Utilities. This position interacts and collaborates with Energy and Water Services professional staff, Building…
Added 4 mins ago
RE
Assistant Manager, Fixed Assets and Maintenance 2026-005 (1 Vacancy)
Regina Exhibition Association Limited (REAL)
Regina, SK
- Full-time
May be required to answer calls outside of regular business hours and provide guidance to evening shift staff
Added 4 mins ago
DO
Manager of Capital Construction & Development
District of Saanich
Victoria, BC
- Full-time
The Manager plans, directs, and coordinates multiple construction teams through all project stages to ensure the efficient use of staff, equipment, and materials. Responsibilities include…
Added 4 mins ago
MA
Production Sub-Leader (Ball Joint Machining)
Musashi Americas
Arthur, ON
- Full-time
…and working conditions. Reports to: Team Leader, Production Manager…
Added 4 mins ago
TS
Street Outreach Worker
The Salvation Army in Canada
Ottawa, ON
- Part-time
Provide Interim case management of those on the prioritization list that score moderate and high acuity until matched with a Housing Based Case Manager
Added 4 mins ago
S
Manufacturing Manager
Sanmina
Ottawa, ON
- Full-time
This role is for our Evening Shift (Monday-Friday, 4:00 pm to 12:00 am) The compensation range for this position is $70,000-$100,000 annually
Added 4 mins ago
CS
Business Development Manager
Calstone Search Group
Sudbury, ON
- $85,000 to $100,000 CAD / year
- Full-time
Reporting to the General Manager, and working closely with global teams, the Business Development Manager will be responsible for developing new business, opening strategic accounts, and…
Added 4 mins ago
N
Regional Sales Manager - Utilities-FR
Noramco
Mississauga, ON
- Full-time
(30%) Consistently exceed customer expectations when processing orders and answering technical questions while offering value added solutions to each customer exchange;
Added 4 mins ago
A
Senior Mechanical Engineer
Airswift
Montreal, QC
- $120,000 to $135,000 CAD / year
- Full-time
Reporting to Engineering Manager in Quebec, the Mechanical Engineer is responsible for serving as the project lead and/or project manager to carry out assignments associated primarily in…
Added 4 mins ago
CW
Billing and Collections Specialist
Clark Wilson LLP
Vancouver, BC
- Full-time
…esteemed billing and collections department team. Reporting to the Manager of Finance, Billing and Collections, this full-time, permanent role is perfect for individuals aiming to excel…
Added 4 mins ago
TS
Assistant Store Manager
The Salvation Army in Canada
Toronto, ON
- Full-time
Support the Store manager/Corps Officer in ensuring all cash operations are carried out according to Salvation Army Policy and Procedures and nightly deposits are secure
Added 4 mins ago
SC
Accounts Payable Technician
SYSTRA Canada
Montreal, QC
- Full-time
As part of the Finance team, the Accounts Payable Manager ensures invoices are processed accurately and suppliers are paid on time. Working closely with internal teams and suppliers, this…

SPM Automation (Canada) Inc.

Senior Mechanical Designer

Windsor, ON, Canada

Full-time

Apply on LinkedIn About employer

Applications open in a new tab.

Job details

Job type: Full-time
Apply by: May 9, 2027
Posting language: English
Posted: Nov 10, 2026

Original job description

Senior Mechanical Designer

About SPM Automation

SPM Automation develops advanced plastic joining and custom automation solutions for leading global manufacturers. Proudly based in Windsor, Ontario, our expertise spans laser, infrared, hot plate, vibration, and ultrasonic welding bringing together applied science, machine design, and intelligent controls to solve demanding production challenges for customers around the world.

We build more than machines - we build long-term customer partnerships. By working closely with customers to understand their products, processes, and goals, we turn complex manufacturing problems into practical innovations that improve quality, productivity, and reliability.

At SPM, you can make a direct contribution and see the results. Our researchers, designers, controls specialists, and machine builders work side by side, connecting ideas and engineering decisions to equipment on the shop floor and performance in customers’ facilities.

As we grow, we are investing in our people and strengthening how we work by sharing knowledge, developing technical capability, and continuously improving our processes. We are looking for people who take pride in their craft, bring curiosity to difficult problems, and want to help customers and teammates succeed.

The Opportunity

Design it. See it built. Help make it better.

We are seeking a Senior Mechanical Designer who wants to own the outcome - not just complete the design.

You will lead the mechanical design of plastic welding machines and industrial automation equipment within agreed customer requirements, project scope, schedules, and engineering-hour budgets. Your involvement will extend from machine concepts and customer reviews through detailed design, assembly support, debugging, and equipment validation.

Working directly with engineering colleagues and the technicians building the equipment, you will turn design concepts into practical, reliable machines. You will also provide project-level design leadership, mentor colleagues, and help improve the tools and processes we use from one project to the next.

This full-time, on-site position is based in Windsor, Ontario, and reports to the Mechanical Engineering Manager. The role provides technical and project leadership but has no direct reports.

See Our Work

Laser-Focused on Innovation - Design Engineering https://www.design-engineering.com/features/laser-focused-on-innovation/

Festo & SPM Automation: Designing Smarter Production Together https://www.youtube.com/watch?v=M2p4RkEMB3Q

Key Responsibilities

Machine Design and Technical Ownership

Develop machine concepts, layouts, and operating sequences based on customer specifications, process requirements, and project scope.

Use SolidWorks to develop complete 3D models, assemblies, engineering drawings, and equipment plans, including associated tooling, processing units, fixtures, and end-of-arm tooling.

Establish technical design objectives and priorities within the direction provided by the Mechanical Engineering Manager.

Develop safe, practical, manufacturable, and serviceable designs supported by appropriate mechanical calculations, component selection, material selection, and tolerance assessments.

Coordinate mechanical interfaces with electrical, controls, pneumatic, and process requirements.

Review and check engineering drawings for accuracy, completeness, and compliance with project requirements before submission for approval.

Create, review, and maintain accurate bills of materials for purchasing and production.

Maintain controlled drawings, design revisions, and supporting technical documentation.

Project Execution and Design Quality

Complete assigned designs within specified project timelines and budgeted engineering hours.

Monitor design progress and communicate technical risks, scope changes, resource requirements, and potential delays early.

Work with Project Management to develop and present machine concepts to customers for review and approval.

Participate in structured design reviews to confirm requirements and resolve risks before design release.

Apply design-for-manufacture and assembly principles to improve equipment quality, accessibility, reliability, and cost.

Work directly with mechanical and electrical technicians to ensure equipment quality, functionality, and constructability.

Resolve design-related issues during assembly, debugging, and validation, and support customer acceptance and installation activities as required.

Capture lessons learned and incorporate improvements into future designs and reusable machine modules.

Technical Leadership and Continuous Improvement

Provide design direction, support, and guidance to team members involved in assigned projects.

Coordinate and review team members’ design work, monitoring progress against project milestones and escalating issues to the Engineering Manager.

Mentor designers through constructive reviews, practical problem solving, and knowledge sharing.

Document design intent and help maintain consistent design practices across the team.

Use and help develop AI-assisted tools and workflows to improve documentation, knowledge sharing, design consistency, and repetitive engineering tasks.

Collaborate with process and controls specialists on equipment and customer-facing improvements, including AI-enabled features where relevant.

Use approved AI tools responsibly, protect company and customer information, and verify outputs before relying on them for engineering decisions.

Qualifications and Experience

Required

Bachelor’s degree in engineering or an engineering technology diploma from an accredited university or college.

At least five years of relevant industry experience with substantial mechanical design experience in industrial production equipment, custom automation, or special-purpose machinery.

Demonstrated ability to lead the design of complete machines or substantial machine systems from concept through detailed design and build support.

Strong proficiency in SolidWorks, including complex assemblies, detailed drawings, and bill-of-materials development.

Strong computer, mathematical, and mechanical problem-solving skills, including engineering calculations, component selection, and tolerancing.

Good working knowledge of applicable industry and engineering standards and machinery-safety requirements.

Strong understanding of engineering materials, their applications, and relevant manufacturing processes.

Ability to manage competing priorities and deliver accurate work within demanding project schedules and engineering-hour budgets.

Strong communication and organizational skills, with the ability to explain design decisions and collaborate effectively with customers and technical teams.

Demonstrated curiosity and initiative in applying AI and digital tools, with the ability to evaluate their outputs critically.

Willingness and ability to travel within Canada and the United States.

Preferred

Experience designing plastic welding equipment or tooling for laser, infrared, hot plate, vibration, or ultrasonic processes.

Experience with pneumatic systems, servo-driven mechanisms, and automated assembly equipment.

Experience supporting equipment debugging, customer acceptance testing, or installation.

Experience mentoring designers and coordinating project-level mechanical design activities.

Experience with AI-assisted workflows, scripting, CAD automation, or low-code tools.

What Success Looks Like

During your first year, you will be expected to:

Independently lead assigned mechanical design packages from concept through release and build support.

Deliver designs that meet customer specifications, agreed schedules, and engineering-hour budgets.

Identify and resolve technical risks before they become assembly or commissioning problems.

Produce accurate, checked drawings, bills of materials, and supporting documentation.

Provide effective technical guidance and help team members meet project milestones.

Contribute reusable designs, documented lessons learned, and practical workflow improvements, including appropriate AI-assisted tools.

Why Join SPM?

Complete-project involvement: See your work progress from an initial concept to functioning equipment.

Direct technical impact: Work closely with customers and build teams, with a clear connection between your decisions and equipment performance.

Canadian roots, global reach: Build your career in Windsor while contributing to projects for international manufacturers.

Collaborative technical teams: Work alongside experienced researchers, designers, controls specialists, and machine builders.

Professional growth: Expand your technical leadership, mentor colleagues, and deepen your knowledge across automation and joining technologies.

Opportunity to improve: Help strengthen design standards, reusable solutions, and project-execution practices as SPM grows.

Position Details

Employment: Full-time, on-site
Reporting to: Mechanical Engineering Manager

Apply on LinkedIn About employer

More about this job

Responsibilities

Lead mechanical design of plastic welding machines and custom automation equipment from concept through detailed design, assembly support, debugging, and validation. Coordinate design work, review drawings and documentation, mentor team members, and improve design practices and workflows.

Requirements

Requires a bachelor’s degree in engineering or an engineering technology diploma, at least five years of relevant experience, and strong SolidWorks skills with experience designing complete machines or substantial machine systems. Candidates should have strong mechanical problem-solving, communication, and project-management abilities, knowledge of engineering standards and machinery safety, and willingness to travel in Canada and the United States.

Skills

Mechanical Design
SolidWorks
Industrial Automation
Machine Design
Plastic Welding
3D Modeling
Engineering Drawings
Bill of Materials Development
Engineering Calculations
Component Selection
Tolerance Assessment
Machinery Safety
Design for Manufacture and Assembly
Pneumatic Systems
Servo-Driven Mechanisms
Technical Leadership

Visa sponsorship

Not detected in the job text

Keywords

SolidWorks
Plastic Welding
Laser Welding
Infrared Welding
Hot Plate Welding
Vibration Welding
Ultrasonic Welding
Industrial Automation
Custom Automation
Special-Purpose Machinery
3D Modeling
Engineering Drawings
Bills of Materials
Pneumatic Systems
Servo-Driven Mechanisms
Automated Assembly Equipment
Design for Manufacture and Assembly
Machinery Safety
Engineering Calculations
Component Selection
Material Selection
Tolerance Assessment
Equipment Debugging
Customer Acceptance Testing
AI-Assisted Tools
CAD Automation
Low-Code Tools
Design Reviews
Project Execution
Technical Mentoring

Report this job

Work requirements

Jobs in Canada