Jobs in Canada

25+ jobs

Group jobs by employerEmail me new jobs Save this search

Added 9 hours ago
Senior Building Operator
GWL Realty Advisors
Winnipeg, MB
Day shift Monday – Friday
Added 2 days ago
NV
Manufacturing Engineer
North Vector Dynamics Inc.
Calgary, AB
- Full-time
…our Systems Engineering team. You’ll work closely with our Process Engineer, who owns routings, work instructions, and quality data, so that the process on paper and the tooling on the…
Added 3 days ago
C&
Building Operator
Cushman & Wakefield
St. Catharines, ON
- Full-time
Enrolled in SMA or SMT (BOMA) or Stationary Engineer 4th-B Class; Stationary Engineer 4th-A Class an asset.
Added 4 days ago
S
Building Technician
SaskTel
North Battleford, SK
- Full-time
BOMI SMT with two years of relevant experience and 5th Class Power Engineer Certification and Refrigeration Engineer Certification
Added 4 days ago
CF
Supervisor, Operations
Cadillac Fairview
AB · Calgary, AB
- Full-time
High School Diploma or equivalent; 4th Class Power Engineer license, with Building Environmental Systems (BES) Operator Class I/II, or BOMA Systems Maintenance Administrator (SMA/SMT) an…
Added 4 days ago
Electronics Manufacturing Engineer
Toradex
ON
We are seeking an Electronics Manufacturing Engineer to develop, support, and improve surface-mount technology (SMT) assembly and box-build processes, while supporting lean manufacturing,…
Added 11 days ago
QH
Facility Maintenance Representative
Quinte Health
Belleville, ON
- Full-time
Must have a satisfactory Criminal Record / Vulnerable Sector Check
Added 11 days ago
I
Process Engineer
isgSearch
Toronto, ON · Greater Toronto Area, Canada
- $65,000 to $70,000 CAD / year
- Full-time
Seeking a Process Engineering Specialist to develop, optimize, and support manufacturing processes within an electronics manufacturing environment.
Added 14 days ago
A
Microelectronics Process Engineer
Actalent
Ottawa, ON · Kanata, ON
- $110,000 to $160,000 CAD / year
- Full-time
…processes and technologies. The group focuses on solutions that support data center and related infrastructure, with additional design and manufacturing activities for industrial, medical,…
Added 14 days ago
EM
Process Engineer - SMT Support
Evertz Microsystems Limited
Burlington, ON
- Full-time
The Process Engineer - SMT Support is responsible for developing, optimizing, and sustaining surface mount technology (SMT) manufacturing processes used in the production of broadcast and…
Added 14 days ago
B
Full Time Maintenance Partner
Brookstreet
Ottawa, ON · Kanata, ON
- Full-time
Must be able to work a rotating shift schedule:
Added 16 days ago
DS
Engineering Technician
Dorigo Systems Ltd.
Burnaby, BC
- $52,000 to $60,112 CAD / year
- Full-time
The Engineering Technician provides hands-on technical support to Engineering and Production within an electronics manufacturing environment. The role supports daily production…
Added 21 days ago
M
Contract Manager, Commercial Management
Metrolinx
Toronto, ON
- Full-time
…mitigate commercial risks, resolve contractual issues, and support informed business…
Added 29 days ago
S
Director of Production Engineering
Syntronic
Ottawa, ON
- Full-time
Own process design, documentation, and control for SMT operations, AOI, X-ray, selective and wave solder, conformal coating, press-fit, Box build, cable and harness, functional test, and…
Added 29 days ago
QH
Facility Maintenance Representative
Quinte Health
Belleville, ON
- Full-time
Must have a satisfactory Criminal Record / Vulnerable Sector Check
Added 1 month ago
CF
Building Operator II (Office)
Cadillac Fairview
AB · Calgary, AB
- Full-time
4th Class Power Engineer License required;
Added 4 months ago
DG
Site Technical Manager (Fourth Class Power Engineer Certification or BES 1 or 2 - NS)
Dexterra Group
Halifax, NS
- Full-time
Minimum 3 years of experience required
Added 1 month ago
A
Supervisor, Technical Services
Allied
Montreal, QC
- Full-time
BES I & II, SMT/SMA, Fourth Class Power Engineer certification, or equivalent.
Added 1 month ago
E
Associate Verification Engineer
ecobee
ON · Ontario, Canada
- Full-time
As an Associate Verification Engineer, you will be at the forefront of validating and delivering high-reliability products and test systems for next-generation hardware. This role is ideal…
Added 1 month ago
GP
Associate Verification Engineer
Generac Power Systems
Toronto, ON · Canada - Toronto
- Full-time
As an Associate Verification Engineer, you will be at the forefront of validating and delivering high-reliability products and test systems for next-generation hardware. This role is ideal…
Added 2 months ago
N
Staff Process Engineer
Nokia
Canada
- Full-time
As a Staff Process Engineer, you will be at the forefront of innovation, driving the development of assembly processes for state-of-the-art electro-optical modules. Your expertise in SMT,…
Added 3 months ago
A
Lead Building Operator
Allied
Vancouver, BC
- Full-time
Certificate of Building Environmental Systems: BES I & II, SMA/SMT, 4th Class Power Engineer, or equivalent.
Added 4 months ago
A
Supervisor, Technical Services
Allied
Toronto, ON
- Full-time
…knowledge-based organizations with distinctive urban environments that support creativity, connectivity and human…
Added 2 months ago
CF
Building Operator II (Retail)
Cadillac Fairview
Richmond, BC
- Full-time
5th or 4th Class Power Engineer License an asset;
Added 2 months ago
A
Manager, Technical Services
Allied
Montreal, QC
- Full-time
…knowledge-based organizations with distinctive urban environments that support creativity, connectivity and human…

Syntronic

Director of Production Engineering

Ottawa, ON, Canada

$110,000 - $130,000 a year · Full-time

Apply on jobs.lever.co About employer

Applications open in a new tab.

Job details

Pay: $110,000 - $130,000 a year
Job type: Full-time
Posting language: English
Posted: Oct 15, 2026

Original job description

Syntronic Production Services Canada is an Electronic Manufacturing Services provider located in Ottawa’s west end. Committed to our customers’ success, we understand that our people are our greatest asset, and we are always on the lookout for great talent.

The Production Engineering Director is responsible for the manufacturing process from new-product introduction through to stable, high-volume production. The role sets process standards, equipment strategy, and engineering methods so the factory launches products on time meeting, cost and quality targets. Objectives include cost, throughput, and first-pass yield improvement year over year. Success is measured by NPI performance, process capability, equipment uptime, cost reduction, and the strength of the team.

Key responsibilities

Process ownership and capability

Own process design, documentation, and control for SMT operations, AOI, X-ray, selective and wave solder, conformal coating, press-fit, Box build, cable and harness, functional test, and final pack.
Define process, work instructions, visual standards, and control plans. Drive process capability (Cp/Cpk) on critical characteristics and close gaps with designed experiments
Lead root-cause analysis on yield loss, solder defects, component damage, test fallout, and escapes. Use structured problem solving (8D, fishbone, 5-Why, DOE) and deploy corrective actions into the process.
Maintain ESD, moisture-sensitive device, and cleanliness controls in line with IPC and customer requirements New product introduction
Lead the plant NPI process from design-for-manufacturability review through pilot, first article, and release to volume.
Run DFM and DFA reviews with design engineering. Challenge layouts, component choices, panelization, test access, and tolerances that will hurt yield or cycle time.
Own PFMEA, process flow, control plan, and work-instruction packages. Define inspection, AOI, and ICT/functional-test coverage with Quality and Test Engineering.
Manage prototype and pilot builds, first-article inspection, and customer or regulatory process qualifications. Equipment, automation, and capacity
Plan capital assembly equipment. Justify spend with capacity, quality, and labor models.
Own equipment acceptance, installation and process qualification.
Remove bottlenecks in SMT, 2nd Stage assembly, box build, test, and material kitting operations.
Set improvement objectives for the engineering teams in terms of uptime and throughput.

Cost, yield, and continuous improvement

Own the engineering contribution for assembly cost: scrap, rework, consumables, labor content, and changeover efficiency. Publish yield reports as required.
Run structured improvement initiatives (lean, Six Sigma, etc) with operation teams to improve plant P&L and customer scorecards.
Standardize best practice processes across all lines and shifts. Quality, compliance, and customer interface
Partner with Quality on IPC-A-610 / IPC-A-620 workmanship, J-STD-001 process control, IPC-7711/7721 rework limits, and customer-specific standards.
Support ISO 9001, AS9100, ISO 27001, ISO14001, quality management systems.
Represent Production Engineering in customer visits, process audits, and failure investigations.
Own traceability requirements with MES and ERP including component lot traceability, and test results tied to each board serial number. People and organization
Lead and coach process, manufacturing and test engineers.
Set technical standards, design rules, and review gates so junior engineers can make consistent decisions.
Build shift coverage and a response model for line-down events.
Recruit team members and develop successors for managers, team leads and principal-engineer roles.

Qualifications

Required

P.Eng. accreditation, with Bachelor’s Degree in electrical, mechanical, industrial, manufacturing, or a related engineering discipline.
Ten or more years in electronics assembly manufacturing, with at least five years leading process or manufacturing engineering.
Demonstrated ownership of board and box level assembly processes, including paste print, placement, reflow profiling, and inspection.
A record of taking products from NPI or transfer into stable volume production, with measurable yield and launch results.
Working knowledge of IPC-A-610, J-STD-001, and ESD (ANSI/ESD S20.20) requirements.
Experience leading engineers and influencing production, quality, supply chain, and design peers
Ability to read schematics, assembly drawings, BOMs, and Gerber or ODB++ data well enough to challenge a process or a design. Preferred
Master’s degree in engineering, with applied problem-solving credentials used on the factory floor.
Experience in a regulated or high-reliability environment: automotive (IATF 16949), medical (ISO 13485), aerospace (AS9100).
Hands-on exposure to ICT, flying probe, boundary scan, and functional test strategy, including fixture and coverage decisions.
Capital project leadership for new lines or a major capacity expansion, from specification through acceptance.
MES, ERP, SPC, and equipment-connectivity experience used to control processes,
Experience with conformal coating, underfill, potting, press-fit and box-build of complete electronic products. Working conditions The role is based in the factory. A substantial share of time is on the production floor, in ESD-controlled areas, around reflow ovens, selective-solder equipment, and test cells. The director must be willing to support off-shift launches, customer audits, and line-down events. Occasional travel to customers, suppliers, and sister plants is expected. This description covers the primary duties of the role. It is not an exhaustive list. Duties may be adjusted as products, volume, and plant structure change.

\n\n

$110,000 - $130,000 a year

We offer competitive salaries, a dynamic working environment, the potential for professional growth and career development, as well as a comprehensive benefits package.

We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Apply on jobs.lever.co About employer

More about this job

Responsibilities

The Director of Production Engineering oversees the manufacturing process from new-product introduction through to stable, high-volume production. They are responsible for setting process standards, managing equipment strategy, and leading engineering teams to meet cost, throughput, and quality targets.

Requirements

Candidates must hold a P.Eng. accreditation with a Bachelor’s degree in an engineering discipline and have over ten years of experience in electronics assembly manufacturing. Proven leadership in process engineering and a strong record of taking products from NPI to volume production are required.

Skills

Production engineering
Manufacturing process
NPI
SMT operations
Root-cause analysis
Process capability
Equipment strategy
Lean
Six Sigma
Quality management
Team leadership
Project management
IPC standards
Process design
Automation
Capacity planning

Benefits

Competitive salary
Professional growth
Career development

Visa sponsorship

Not detected in the job text

Keywords

Production Engineering
Electronics Manufacturing
NPI
SMT
AOI
X-ray
Selective Solder
Wave Solder
Conformal Coating
Press-fit
Box Build
Functional Test
Cp/Cpk
8D
Fishbone
5-Why
DOE
ESD
IPC-A-610
J-STD-001
DFM
DFA
PFMEA
Lean
Six Sigma
ISO 9001
AS9100
MES
ERP
SPC

Report this job

Work requirements

Jobs in Canada