CNC Machinists and Programmers
- Concord, ON, Canada
$30 to $37 CAD / hour
Applications open in a new tab.
Job details
- Pay
- $30 to $37 CAD / hour
- Experience
- Min 5 years experience
- Working hours
- 40 hours a week
- Posting language
- English
- Posted
Original job description
Summary:
Reporting to the Machine Shop Supervisor as a CNC Machinist/Programmer, you will work closely in Production. The successful candidate must be willing to multitask and cross-train on all machines within the cell, as required. This position is a day shift position.
Primary responsibilities:
- Perform own set-ups by positioning and aligning tooling per set-up instructions using CNC Machines.
- Maintain tolerances by observing operation and making necessary machine offset adjustments, cutter changes and self-inspection.
- Document actions in support of quality logs, communicate all discrepancies in machining to supervision and share updates as required.
- Perform work from set-up sheets, manufacturing sheets and drawings.
- Support and promote continuous improvement, 5S activities and Standard Work Development in the cell.
- Perform other duties as assigned.
- 5 axis CNC machinist / programmer
- Min 5 years experience
- 40 hours a week Mon - Fri
- Familiarity with Heidenhein controls DMG DMU machines a plus
- Okuma machines
- Fanuc controls a plus
- Autodesk Fusion 360 Programming familiarity
- Open Mind Hypermill Programming familiarity
**** Only qualified candidates who meet all of our clients requirements will be contacted for interview. Thank you and good luck with your search.
More about this job
Responsibilities
The CNC Machinist/Programmer at The Wohl Group will set up and run CNC machines, adjust them to keep parts within tolerance, and record quality checks. They will also work from drawings and setup sheets and support continuous improvement in the work cell.
Requirements
Candidates need at least 5 years of experience as a 5-axis CNC machinist or programmer. Familiarity with Heidenhain, DMG DMU, Okuma, Fanuc controls, Autodesk Fusion 360 and HyperMill programming is an asset.
Skills
- 5-axis CNC machining
- CNC programming
- Heidenhain controls
- DMG DMU
- Okuma machines
- Fanuc controls
- Autodesk Fusion 360
- HyperMill programming
- Machine setup
- Tooling alignment
- Machine offset adjustment
- Self-inspection
- Blueprint reading
- Set-up sheets
- Quality documentation
- 5S
- Standard Work development
- Continuous improvement
- Cross-training
- Multitasking
Categories
- Manufacturing
- Engineering
- Trades
Keywords
- CNC machinist
- CNC programmer
- 5-axis machining
- Heidenhain
- DMG DMU
- Okuma
- Fanuc
- Autodesk Fusion 360
- HyperMill
- Open Mind
- machine setup
- tolerances
- quality logs
- 5S
- continuous improvement
- Standard Work
- machine shop
- manufacturing
- day shift
- CNC
Seniority
Senior
Tools
- CNC machines
- DMG DMU
- Okuma
- Fanuc
- Autodesk Fusion 360
- HyperMill