Find work in Canada.

566,535 jobs across our Canadian network. How we count

Jobs in Canada

25+ jobs

Email me new jobs Save this search

Added 4 mins ago
M
Manager, Aseptic Compounding
McKesson
Calgary, AB
- Full-time
The Manager, Aseptic Compounding provides leadership and oversight for hazardous and non-hazardous sterile compounding operations, ensuring safe, high-quality and compliant pharmacy…
Added 1 hour ago
LI
Project Manager/Leader Senior
Lotus IT Solutions
Toronto, ON · Greater Toronto Area, Canada
- Contract
Oversee GUI design review and approval, functional design drawings, quality assurance testing, and system and functionality testing
Added 1 hour ago
Technical Service Representative, ACT (Mississauga, ON)
Getinge
Mississauga, ON
…visits to meet service agreement obligations while focusing on quality service and customer satisfaction for the Acute Care Therapy division. In addition, the position will be expected to…
Added 1 hour ago
Technical Service Representative, ACT (Calgary, Alberta)
Getinge
Calgary, AB
…visits to meet service agreement obligations while focusing on quality service and customer satisfaction for the Acute Care Therapy division. In addition, the position will be expected to…
Added 2 hours ago
BW
Ambulance Readiness Technician (Kamloops) CAS
BC Women's Hospital and Health Centre
Kamloops, BC
- Full-time
Reporting to the Manager, the Ambulance Readiness Technician (ART) is responsible for sanitizing and processing critical medical equipment, restocking supplies on vehicles, performing and…
Added 2 hours ago
ML
FSQA Coordinator - Contract
Maple Leaf Foods Inc
Oakville, ON
- $47,000 to $69,000 CAD / year
- Contract
Reporting to the FSQA Manager, the FSQA Coordinator monitors and analyzes and interprets data related to Food Safety, GMP, HACCP and other Quality Assurance Program requirements to ensure…
Added 2 hours ago
RM
Manager - Diagnostic Imaging
Ross Memorial Hospital
Kawartha Lakes, ON · Lindsay, ON
- Full-time
Strong knowledge of quality assurance, validation, regulatory compliance, patient safety, and risk management practices.
Added 2 hours ago
M
RQ11817 - Project Manager/Leader - Senior
Maarut
Toronto, ON
- Contract
Added 2 hours ago
AB
Quality Supervisor
Amphenol Borisch Technologies
London, ON
- Full-time
The Quality Supervisor provides day-to-day leadership to a team at the London, Canada facility and reports to the Sr. Operations Manager. The Quality Supervisor is responsible to ensure…
Added 2 hours ago
A
Assessment Coordinator
Altis
Richmond, BC
- $23 to $25 CAD / hour
- Contract
You'll coordinate with verification agencies, track application progress, conduct quality assurance checks, and communicate assessment outcomes.
Added 2 hours ago
PG
Production Operations Manager
Plan Group Inc.
Brampton, ON
- Full-time
Support the Shop and Quality Assurance teams to ensure programs and procedures are compliant with our QA Manual
Added 2 hours ago
B
Electrical Drafter
BPA
AB · Greater Edmonton Metropolitan Area
- Full-time
Accountable for the quality of service on assigned projects.
Added 3 hours ago
CB
Purchasing Manager
Chef Bombay
Canada
- Full-time
The Purchasing Manager will play a critical role in supporting production schedules and customer demand by working closely with the Production, Quality Assurance, Finance, and Warehouse…
Added 3 hours ago
WC
(CAN) Overnight Assistant Manager
Walmart Canada
New Glasgow, NS
- Full-time
Executes and monitors asset protection and safety controls; maintains quality assurance standards; oversees safety and operational reviews while ensuring compliance with Walmart policies…
Added 3 hours ago
PC
Manager, Processing - London, ON
Premier Canada Assurance
London, ON
- Full-time
We are Premier Marine Insurance Group (West) Inc. and Premier Canada Assurance Managers Ltd., a Canadian Managing Underwriting Agency that has been writing specialty lines for domestic and…
Added 3 hours ago
K
Project Engineer/Analyst
Kinectrics
Tiverton, ON
- Full-time
Reports to: Section Manager, Bruce Site Engineering Projects
Added 3 hours ago
PC
Manager, Integrated Supply Chain - M&M Food Market
Parkland Corporation
Mississauga, ON
- Full-time
The Manager, Integrated Supply Chain is responsible for managing the day-to-day execution of supply chain activities across demand planning, inventory management, procurement, supplier…
Added 3 hours ago
CC
Specialist, Manufacturing Procurement
Coca-Cola Canada Bottling Limited
Brampton, ON
- Full-time
…Production Centres across Canada with category strategies, supply assurance, price negotiation and vendor optimization that supports overall company goals and objectives. The successful…
Added 3 hours ago
PC
Manager, Integrated Supply Chain - M&M Food Market
Parkland Corporation
Mississauga, ON
- Full-time
The Manager, Integrated Supply Chain is responsible for managing the day-to-day execution of supply chain activities across demand planning, inventory management, procurement, supplier…
Added 3 hours ago
WC
(CAN) Food Assistant Manager
Walmart Canada
Valleyfield, PE
- Full-time
Executes and monitors asset protection and safety controls; maintains quality assurance standards; oversees safety and operational reviews while ensuring compliance with Walmart policies…
Added 3 hours ago
A
Engineer, Quality Assurance
AvPosts
Calgary, AB
- Full-time
Engineer, Quality Assurance (Ref. #:2026-053) Sunwest Aviation Ltd. is the leading Western Canadian operator of jet and turboprop charter aircraft. Our fleet consists of a wide variety of…
Added 3 hours ago
W
Quality Continuous Improvement Technician (Night Shift)
Wonderbrands
Toronto, ON · Etobicoke, ON
- Other
Additionally, QCI Techs support the Bakery Quality Manager (BQM) in ensuring adherence to all Quality Assurance programs, including HACCP, and actively participate in preparing for BRC…
Added 3 hours ago
BV
Project Manager - Environmental Laboratory
Bureau Veritas
Quebec, QC
- Full-time
The Project Manager contributes, through the personalized service he/she provides, to the quality service offered to the clients and thus to the organization’s objectives. Acting as the…
Added 3 hours ago
C
Construction Manager – High-Rise Residential Construction [Umbrella Design + Construction Consulting]
CareerBeacon
Halifax, NS
- $160,000 to $190,000 CAD / year
- Full-time
…Nova Scotia, and is seeking a highly experienced Construction Manager to lead this landmark…
Added 4 hours ago
LI
Senior Project Manager
LJB Inc.
Markham, ON
- Full-time
Manage all aspects of project execution, including project controls, risk management, quality assurance, and financial performance.

Weir

Laser Scanning Technician

Fort McMurray, AB, Canada

$38.4 CAD / hour · Full-time

Apply About employer

Applications open in a new tab.

Job details

Pay: $38.4 CAD / hour
Job type: Full-time
Experience: 1-2 years of relevant experience, or a recent graduate with strong mechanical aptitude.
Posting language: English
Posted: Nov 2, 2026

Original job description

Job Title Division: Weir Minerals

Location: Onsite
Work Arrangement: Hybrid (approximately 60% travel to customer mine sites and 40% office-based)

Purpose of Role: The Laser Scanning Technician role will be focused on providing Oil Sands customers with laser scanning support. The individual will be responsible for ensuring the effective deployment and maintenance scanning equipment. The role provides field and shop-based measurement services, oversees scanning equipment governance and calibration compliance, and develops digital reporting and automation capabilities that enable condition assessments, outage planning, retrofit execution, quality investigations, and re-use versus replace recommendations for critical customer assets. Reporting to the Oil Sands Technical Solutions Manager, the Laser Scanning Technician collaborates closely with Aftermarket Account Managers, Field Engineers, Reliability and Quality teams, third-party technology partners, and key Oil Sands customers.

Why choose Weir:

Be part of a global organization dedicated to building a better future: At Weir, the growing world depends on us. It depends on us constantly reinventing, quickly adapting and continually finding better, faster, more sustainable ways to access the resources it needs to thrive. And it depends on each of us doing the best work of our lives. It’s a big challenge – but it is exciting.
An opportunity to grow your own way: Everything moves fast in the dynamic world of Weir. This creates opportunities for us to take on new challenges, explore new areas, learn, progress and excel. Best of all, there is no set path that our people must take. Instead, everyone is given the support and freedom to tailor-make their own career and do the best work of their lives.
Feel empowered to be yourself and belong: Weir is a welcoming, inclusive place, where each individual’s contribution is recognized and all employees are encouraged to innovate, collaborate and be themselves. We continually focus on people and their wellbeing. We believe in fairness and choose to be honest, transparent and authentic in everything we do.

Key Responsibilities:

Including but not limited to:

Obtain and maintain required site access, safety certifications, and vehicle permits for key Oil Sands customer sites.
Conduct in-situ laser scanning of customer assets and generate automated and custom wear reports to support maintenance planning and re-use versus replace decisions.
Perform manual scan alignment, data processing, and report generation for components not covered by existing automated workflows.
Perform 3D scanning of customer pumps, pump stations, and associated piping systems to support retrofit projects, fitment studies, and equipment upgrades.
Provide metrology support for reliability investigations, including laser scanning and FAROArm measurements of components exhibiting fitment, wear, or performance issues.
Maintain laser scanning standards, procedures, and work instructions to ensure alignment with current best practices and quality requirements.
Proficient with scanning technologies and software platforms, including Control X.

Measurements:

Timely completion of scans, inspections, and reports that support customer outages, reliability investigations, retrofit projects, and re-use versus replace decisions.
Customer satisfaction and feedback regarding responsiveness, technical support, and quality of deliverables.
Scanning equipment uptime, calibration compliance, and program readiness.

Safety First:

Demonstrate 100% commitment to our zero harm behaviors in support of our drive towards developing a world class safety culture.
Key Responsibilities & Requirements:

Able to work in a manner that ensures the safety of themselves and others
Able to demonstrate compliance to company safety procedures and legal obligations
Recognise and report and resolve hazards identified
Confidence and ability to intervene on practices deemed to be unsafe
Engage and promote a zero harm culture
Be aware of physical limitations based upon job requirements

Job Knowledge/Education and Qualifications:
Bachelor's degree or Technical Diploma in Engineering, Engineering Technology, or a related discipline.

1-2 years of relevant experience, or a recent graduate with strong mechanical aptitude.
Proficiency with laser scanning technologies and software platforms, including FARO software and Geomagic Control X.
Strong computer and technical problem-solving skills.
Valid driver's license with a clean driving record.
Ability and willingness to travel extensively throughout the Wood Buffalo region.
Excellent verbal and written communication skills, including the ability to prepare technical reports and interact effectively with customers and internal stakeholders.

Preferred Qualifications

Experience with rotating equipment, industrial maintenance, metrology, or mining and Oil & Gas environments.
Knowledge of slurry pump inspection, disassembly, and repair processes.
Professional designation such as EIT, CET, or AScT.
CSO certification through Energy Safety Canada.

Language:

Demonstrated ability to read, analyze, and prepare technical reports, inspection documentation, and business correspondence. Strong verbal communication, presentation, and interpersonal skills are required to effectively engage with customers, field personnel, engineers, management, and other stakeholders. Candidates must possess excellent active listening skills and a consultative approach to problem-solving and customer support. Fluency in spoken and written English is required.

Mathematical Skills:

Strong analytical and numerical skills with the ability to interpret dimensional inspection data, engineering drawings, technical specifications, and complex measurement results to support effective decision-making.

Reasoning Ability:

Ability to apply sound technical judgment and practical problem-solving skills in a variety of field and shop environments. Capable of interpreting instructions presented in written, verbal, and graphical formats and resolving issues involving multiple variables and competing priorities.

Computer Skills:

Proficient with Microsoft Windows and Microsoft Office applications. Experience with laser scanning, metrology, CAD, or data-processing software such as Geomagic Control X, FARO software, Autodesk ReCap Pro, or similar platforms is considered a strong asset.

Certifications, Licenses, Registrations, Special Skills:

EIT, CET, AScT, or equivalent professional designation is considered an asset.

CSO certification by Energy Safety Canada is considered an asset.

Physical Requirements:

This role requires approximately 60% travel to customer mine sites within the Wood Buffalo region. Occasional evening, night, and weekend work may be required to support planned and unplanned customer outages, inspections, and field activities. The incumbent must be capable of transporting and handling laser scanning equipment and may occasionally be required to lift or move items weighing up to 50 pounds.

Work Environment:

The incumbent will regularly work in a combination of office, shop, manufacturing, and customer mining environments. While performing the duties of this role, the employee may be exposed to moving mechanical equipment, elevated noise levels, varying weather conditions, and active industrial worksites. Travel of up to 60% is expected to support customer activities and field-based scanning requirements. Appropriate personal protective equipment (PPE), including safety footwear, safety glasses, and other site-specific PPE, will be required when working in operational environments.

Core Competencies:

To perform the job successfully, an individual should demonstrate the following competencies:

Problem Solving – Identifies and resolves technical problems/situations in a timely manner, gathering and analyzing information, developing alternative solutions. Works well in group problem solving situations, uses reason even in difficult/emotional situations.

Customer Service – Manages ongoing interactions with customers, responds promptly to customer needs, solicits customer feedback to improve service, responds to service/assistance requests and meets commitments.

Safety and Security – Observes safety and security procedures, determines appropriate action beyond guidelines, reports potentially unsafe conditions, uses protective/safety equipment and materials properly.

Quality – demonstrates accuracy and thoroughness, looks for ways to improve and promote quality, applies feedback to improve performance, monitors own work to ensure quality and correctness.

Dependability – Follows instructions and responds to management direction. Takes responsibility for own actions, keeps commitments, commits to long hours of work when necessary to reach goals and completes tasks on time or notifies appropriate person with an alternate plan.

Founded in 1871, Weir is a world leading engineering business with a purpose to make mining operations smarter, more efficient and sustainable. Thanks to Weir’s technology, our customers can produce essential metals and minerals using less energy, water and waste at lower cost. With the increasing need for metals and minerals for climate change solutions, Weir colleagues are playing their part in powering a low carbon future. We are a global family of 11,000 uniquely talented people in over 60 counties, inspiring each other to do the best work of our lives.

For additional information about what it is like to work at Weir, please visit our Career Page and LinkedIn Life Page.

Compensation: $38.40 CAD Hourly

This Job Posting is for an Existing Position.

We are committed to an inclusive and accessible recruitment process. Accommodations are available for candidates with disabilities upon request at any stage of the selection process. #minerals

##LI-AV1

Apply About employer

More about this job

Responsibilities

The Laser Scanning Technician provides field and shop-based measurement services, including in-situ laser scanning and 3D scanning of customer assets. They are responsible for maintaining scanning equipment, generating technical reports, and supporting maintenance planning and retrofit projects.

Requirements

Candidates must hold a Bachelor's degree or Technical Diploma in Engineering or a related discipline with 1-2 years of relevant experience. Proficiency in laser scanning software, strong technical problem-solving skills, and a valid driver's license are required.

Skills

Laser scanning
Metrology
3D scanning
Geomagic Control X
Data processing
Technical reporting
Mechanical aptitude
Equipment calibration
CAD
Autodesk ReCap Pro
Industrial maintenance
Slurry pump inspection
Analytical skills
Problem-solving
Customer support
Safety compliance

Visa sponsorship

Not detected in the job text

Keywords

Laser Scanning
Metrology
3D Scanning
Geomagic Control X
FARO
Autodesk ReCap Pro
Oil Sands
Mining
Slurry Pump
Mechanical Engineering
Technical Reporting
Calibration
Maintenance Planning
Retrofit
Reliability
Quality Assurance
Field Engineering
Data Processing
Safety Certification
CSO Certification
EIT
CET
AScT
Industrial Maintenance
Engineering Technology

Report this job