Position summary
The General Labourer – CCO Machine Operator runs the Chromium Carbide Overlay (CCO) machine in the Fabrication Shop, applying wear-resistant overlay to the inside of pipe and pipe spools to specification, safely and on schedule.
CCO operation is the primary duty. When the CCO machine is not running or CCO workload is low, the employee is assigned general labour duties in the Fabrication Shop or the Rubber Shop, as directed by the supervisor.
Key responsibilities
CCO machine operation (primary)
- Set up, operate and monitor the CCO pipe overlay machine according to work orders, procedures and set parameters.
- Load, align and secure pipe and spools on the rotators or positioner using overhead cranes, hoists and rigging; unload and stage finished pipe.
- Position the welding head inside the pipe bore and set rotation speed, travel and wire feed for the pipe size and overlay thickness required.
- Load and change welding wire, flux and other consumables; keep adequate stock at the machine and report low inventory.
- Monitor the overlay process during the run (rotation, travel, bead overlap, heat) and make adjustments within set limits.
- Check finished pipe for overlay thickness, full bore coverage, bead overlap and visible defects; record results and report non-conformances.
- Complete production paperwork accurately: work orders, pipe or spool and heat numbers, consumable usage, run times and downtime.
- Carry out operator-level maintenance: daily checks, cleaning, tip and nozzle changes, and reporting faults to maintenance or the supervisor.
- Support downstream steps for CCO pipe as trained, such as slag removal and bore cleaning, grinding of pipe ends and moving spools to fitting, welding or shipping.
- Keep the CCO cell clean and organized, including slag, flux and scrap removal.
Fabrication Shop support (when CCO is not running)
- Assist fitters and welders with material handling, staging and positioning of pipe, plate and fittings.
- Perform grinding, deburring, cleaning and surface preparation of parts.
- Operate basic shop equipment as trained (saws, grinders, hand and power tools).
- Help with loading, unloading and moving material using cranes, hoists and forklift once certified.
- Carry out general housekeeping and 5S in the shop.
Rubber Shop support (when assigned)
- Assist rubber liners with surface preparation, buffing and cleaning of pipe and parts.
- Help with material handling, cutting and staging of rubber and move parts in and out of the work area.
- Support autoclave loading and unloading and other tasks as trained and directed by the Rubber Shop Supervisor.
Health, safety and quality
- Work in compliance with the Occupational Health and Safety Act, Soluroc policies and safe work procedures.
- Wear required PPE at all times and use ventilation and fume extraction as required for overlay welding.
- Follow lockout/tagout, hot work, crane and rigging procedures.
- Report hazards, incidents, near misses and equipment defects immediately.
- Follow quality procedures and stop work when a quality or safety concern arises.
- Perform other related duties as assigned.
Qualifications
Required
- Experience in a manufacturing, fabrication, mining-supply or industrial shop environment, or demonstrated mechanical aptitude.
- Ability to follow written and verbal instructions, work orders and safe work procedures.
- Ability to read a tape measure and take basic measurements accurately.
- Reliable attendance and willingness to move between the Fabrication Shop and Rubber Shop as workload requires.
- Ability to meet the physical demands of the role.
- CSA-approved safety footwear; other PPE is supplied by Soluroc.
Assets
- Experience operating automated or semi-automated welding, hardfacing or overlay equipment.
- Basic welding knowledge (FCAW, SAW or MIG) or welding coursework.
- Overhead crane, rigging and forklift training or certification.
- WHMIS and Working at Heights training.
- Experience with grinders, pipe handling or pipe rotators and positioners.
Training on the CCO machine, cranes, forklift and site safety procedures is provided on the job.
Working conditions and physical demands
- Industrial shop environment with exposure to noise, heat, welding fumes, dust, sparks and rubber and adhesive odours.
- Standing and walking for most of the shift, with frequent bending, reaching and repetitive tasks.
- Lifting and carrying up to 50 lb (23 kg) regularly; heavier loads moved with cranes, hoists or team lifts.
- Work around overhead cranes, moving equipment and hot material.
- Overtime may be required based on production needs.
Soluroc is an equal opportunity employer. Accommodation is available on request throughout the recruitment process and employment, in line with the Ontario Human Rights Code and the AODA.